# Copy to .env (git ignores it) and fill in the REPLACE_ME lines. # --- the companion: EITHER a radio on USB (A) OR an openHop companion (B) ---- # (A) USB MC_SERIAL=/dev/meshcore # `ls -l /dev/serial/by-id/` -- the long name stays the same after a replug, # /dev/ttyACM0 does not. MC_SERIAL_HOST=/dev/serial/by-id/REPLACE_ME # group of that port on this computer: `stat -c %g /dev/ttyACM0` MC_SERIAL_GID=20 # (B) openHop on this machine (README "Bez vyhrazené desky"): delete the three # MC_SERIAL* lines above and uncomment these two # MC_TCP=127.0.0.1:5002 # COMPOSE_FILE=docker-compose.yml:docker-compose.host.yml # amd64 = PC; arm64 = Raspberry Pi 4/5 with a 64-bit system MC_ARCH=amd64 # latest, or a release (e.g. 1.0.0) to stay on it MC_VERSION=latest # --- the repeaters ------------------------------------------------------------ # Name exactly as the repeater advertises it; several: comma separated. MC_REPEATERS=REPLACE_ME # Admin or guest password of the repeater(s). Guest: all but external sensors. MC_PASSWORD=REPLACE_ME # Seconds between readings (min 3600). Each reading takes ~1 s of a channel # everyone shares. A battery does not change in minutes: 8 hours is plenty; # https://meshcore.repeater.cz/nastaveni/telemetrie/ MC_INTERVAL=28800 # Czech mesh: 2 (width of route hashes in packets this radio sends) MC_PATH_HASH_BYTES=2 # --- Grafana ------------------------------------------------------------------ GRAFANA_PASSWORD=REPLACE_ME GRAFANA_PORT=3000