248 Commits
Author SHA1 Message Date
tthandClaude Opus 5.5 3293254443 OTA: a Check button tells whether the node is up to date, without sending anything
build / ci-image (push) Successful in 10s
build / build (push) Successful in 26m44s
Login, `ver`, `fw status` (and `fw ver` for the release lookup), then the
outcome: "up to date: the node already runs <tag>, no update needed" or
"update available: <tag>, delta N B", with the node's version on top. It
stops before `fw begin` and before the side channel, so no chunks go on air.
OtaTransfer.checkOnly, OtaState.available; OtaResult carries the release
tag and the `ver` reply.

Refs #28

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-19 12:09:56 +01:00
tthandClaude Opus 5.5 5edb1f3ab7 OTA: take the package from the latest meshcore-tth release by itself
build / ci-image (push) Successful in 12m58s
build / build (push) Successful in 11m54s
With no file chosen, the node's target (`fw ver`) and image (`fw status`
/ `fw base`) pick the delta from manifest.json of the latest public
release on git.rfa.cz; it is checked against SHA256SUMS (the node checks
the manifest signature itself). Choosing .mcfw files stays for own
builds.

Bench 16. 11. 2026: a node on v1.18.0+tth.20261115.2 got the delta to
20261116 found and downloaded by the app, over the side channel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 23:45:48 +01:00
tthandClaude Opus 5.5 1b2e0ccdfc Add OTA firmware updates of meshcore-tth nodes, with a side channel
A "Firmware update (OTA)" tile in the repeater hub (admins, tth fork
switch kOtaUpdate) pushes a delta of a meshcore-tth -ota image over the
mesh: the package that starts from the node's image is picked from the
chosen .mcfw files, binary chunks with text as the fallback, an airtime
budget, verify and apply. Optionally on a side channel: the node goes to
another preset by tempradio, the companion follows (checked), the chunks
go zero-hop and both come back at the end.

A port of the reference engine of the tth.meshcore Ansible collection
(module_utils/meshcore_ota_engine.py); test/services/ota/ota_vectors.json
is its test-vector file. Bench 16. 11. 2026: the connector over TCP to a
USB companion, side channel 866.0/SF7, applied a 2.7 kB delta, 20 s
airtime, companion back on its preset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 23:32:04 +01:00
upstream-sync-bot 5a53e45e9a Merge upstream/dev (10 commits) [upstream-sync] 2026-11-16 04:52:13 +00:00
zjs81 89071473a5 Merge branch 'dev' into ez_bookmark 2026-11-15 15:16:18 -07:00
zjs81 69421243cf Merge pull request #661 from ericszimmermann/ez_backup-restore_2
Small bugfix for Restore
2026-11-15 15:14:11 -07:00
zjs81 53e4e457ca Preview image versions before sending, and repair unheard chunks
Send sheet: opens on what recipients will see (the encoded photo decoded
on this device) instead of the original. "Try another version" encodes
the whole photo again with a near-invisible zoom/shift; the generative
decoder reconstructs each version differently, and on Kodak the best of
three raised CLIP agreement from 0.828 to 0.853. The user picks the
version to send; packet count and airtime follow the selection. Version 1
is byte-identical to the previous encode, so the wire format is
unchanged. The sender's bubble shows the chosen version and carries the
AI-reconstructed label.

Repeater echoes: the raw RX log handler now decrypts GRP_DATA as well as
GRP_TXT and counts repeaters re-flooding each chunk of our own images.
The bubble shows the repeat count like channel text, and Packet info
lists each packet. About 15 s after sending, chunks no repeater echoed
are resent once, but only when another chunk of the same image was
echoed, so senders with no repeater in earshot do not double their
airtime. Outgoing entries now record their payload size.
2026-11-14 20:58:43 -07:00
ericz 6c29aea7e0 backup and restore of bookmarks. 2026-11-13 23:21:21 +01:00
ericz 37bfdd47fe Fix backup restore settings and ordering
Apply restored eviction and list sorting settings before reloading data; stabilize the message-filter ingestion test against queued review history.
2026-11-13 19:28:23 +01:00
tthandClaude Opus 5.5 185d2aca53 Merge upstream/dev (22 commits) [upstream-sync]
build / ci-image (push) Successful in 11s
build / build (push) Successful in 26m36s
Conflicts resolved by hand, our fork changes carried over:
- MainActivity.kt: keep the unread widget hooks next to upstream's
  scroll capture (attach and detach both).
- app_settings_screen.dart: upstream wrapped the list in
  MeshSettingsTileTheme; image-message and translation sections stay
  gated on kOnDeviceMl (ML-free build).
- channel_chat_screen.dart: upstream split build() into methods; took
  theirs and re-applied the terminal-theme list padding.
- chat_composer.dart: both imports (terminal_theme, radio_guard).
- mesh_nav_tile.dart: upstream's meshTileTitleStyle, with the smaller
  terminal-theme title kept.

flutter analyze clean, flutter test 1522 passed (CI image, local).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 15:30:43 +01:00
zjs81 2d56d5e349 Store histories and the tile index in SQLite
Message, channel and route histories move from whole-blob preferences to
indexed SQLite rows on native platforms, so chats page from storage instead
of loading a full conversation. Web keeps the preferences store. Existing
histories are imported once on the first launch.

Linux and Windows keep the map tile index in SQLite and import the old JSON
index on first use.

Unreadable legacy data no longer blocks saves, migrations or startup: it is
left in place and skipped. If the database cannot be opened, the run keeps
histories in preferences and the next launch merges them in.

Also adds a performance profiling reference and a script that clears the
Dart HTTP profile.
2026-11-09 22:32:40 -07:00
zjs81 462159e803 Tester feedback: offline mode, pt-PT, menus, layout and translations
Offline (read-only) mode
- The last connected radio is remembered; with no radio the app opens on
  its saved contacts, channels, messages and unread counts.
- Main screens stay open on disconnect. A Connect button replaces the
  battery and signal indicators, with a sheet to reconnect, choose a
  radio or stop a pending reconnect.
- While disconnected everything is read-only: the composer becomes a
  "connect to send" bar (drafts kept) and controls that change the radio
  or stored history are disabled or hidden.
- Resending while disconnected no longer deletes the message; a
  different radio no longer shows the previous radio's channels.
- Notification taps open the saved chat while offline.

Chats and menus
- Channel chat menu: notifications, edit channel, delete channel; the
  filter row lines up with the others; bell moved out of the app bar.
- DM and room menus: remove from contacts; rooms get room management.
- Search field uses the full app bar; long-press a result to copy.
- Hashtag channel titles no longer read "# #name"; more room around the
  radio activity dot.
- Repeat filter: short messages from one sender are caught at the same
  count as long ones.

Layout
- Shared menu row (wraps to two lines) and segment label (never splits
  a word) used across the app.
- One Scan button on the scanner; consistent settings tile titles;
  contact "last seen" wraps instead of truncating; unfetched repeater
  settings are dimmed.

Localization
- New European Portuguese locale (pt_PT); regional locales are handled
  by the language picker, notifications and the background service.
- Fill 67 missing strings per locale, including backup and restore.
- Keep "Flood" and "Zero Hop" untranslated, shorten "last seen" and
  routing labels, and fix mistranslated scan, theme and hop strings.
- Received-image strings, badge and caption come from translations.
- Regenerate the Czech localizations, which were missing strings.

Docs
- Add documentation/design.md (UI reference) and offline-mode.md;
  update channel, chat, navigation and scanner docs.
2026-11-09 21:18:29 -07:00
zjs81 47f2293a5c Merge pull request #646 from ericszimmermann/ez_backup-restore
Backup and Restore functionality
2026-11-09 07:08:40 -07:00
zjs81 5ea44d6ce9 Tester feedback: routing, bulk select, notifications, map crash
Routing
- Auto routing picks routes by Thompson sampling over faded delivery
  stats (24 h half-life, capped evidence), weighted by what the radio
  currently hears; retries prefer a different route; last attempt floods.
- Route failures are held until a message's fate is known, so an offline
  contact no longer wrecks its route history; failing routes are only
  deleted after a week without a delivery.
- Direct (zero-hop) path is a rotation candidate (#643) and a new Direct
  mode in the routing sheet; history routes are used for repeater logins.
- Remove the route-weight sliders the new chooser no longer uses.

Chats
- Bulk selection in channel chats (spam / not spam / delete / copy) and
  in the Filtered messages list.
- Tapping a search result jumps to the message.
- Swipe-to-reply ignores vertical scrolls.
- Active conversation follows route lifecycle, so covered chats count
  unread again.

Notifications
- Tapping a notification opens its conversation.
- Per-conversation coalescing and one alert per queued-message sync.
- Monochrome status-bar icon; background service stops when the app is
  swiped away; stale notifications cleared on radio or slot change.

Other
- Online map: opaque links and painted dots for dense areas to avoid an
  Impeller GPU crash; expandable hop list on path maps.
- Contact share: clipboard import of shared contacts, "Add again".
- Android: enableEdgeToEdge and scrolling-screenshot support.
- Translations for all new strings; fix mistranslated routing labels.
2026-11-08 23:19:15 -07:00
ericz cc12e2eb96 Make spam example test deterministic 2026-11-08 14:30:20 +01:00
ericz a020eb30d0 ask for download models and fix problem with reloading discovered list after import. 2026-11-08 14:13:33 +01:00
zjs81 ddf0b9f553 Fix false repeat flags, add repeat-sends setting, limit holiday animations
Message filter:
- Ignore copies of a message already seen (same sender, text and send
  second). Switching between companions re-synced messages the first one
  had delivered; they missed per-radio storage dedup and were flagged as
  repeats.
- Exempt replies and @[name] mentions from repeat detection.
- New "Sends to count as a repeat" setting (2-5, default 2). Each send
  must fall within 10 minutes of the previous one.
- Translations for the new strings in all locales.

Holiday animations:
- Only one plays at a time; greetings arriving while one is playing or
  within 5 seconds after it ends are dropped, not queued.
- Christmas map "self" marker: Santa hat was upside down.
2026-11-08 01:33:05 -07:00
zjs81 80ead2fc2d Address review: trace request size and contact-share translation
- Manual path trace validates the request that will actually be sent
  (round trips become 2n-1 hops, 3-byte hops go out as 4-byte prefixes)
  against the 172-byte frame and 64-hop firmware limits, and disables Run
  with an explanation when it does not fit. PathTraceMapScreen also refuses
  to send an oversized request.
- Contact-share tokens are never passed through message translation, so
  the share cannot be mangled before sending.
2026-11-07 22:53:42 -07:00
zjs81 c939f7a29c Add Czech, in-chat search, typed-hash path trace and contact sharing
- Czech UI locale (app_cs.arb), selectable in the language picker and as a
  message translation language; language names added to every locale.
- Fix wrong language names: Slovak shown as Slovenian in it/ja/pt/sl,
  garbled Slovak/Bulgarian in pl, Ukrainian in ru, Hungarian in ko/zh.
- Search inside DM and channel chats across the full stored history, with
  highlighted matches; filtered channel messages are excluded.
- Path trace by typed hashes (e.g. A1,B2,C3) from the Contacts and map
  menus, without needing node locations; the map trace panel can hand its
  hops to it.
- Share contacts in chats using the official app's <pubkey:type:name>
  format; received cards have a one-tap Add contact button that reuses the
  QR card import path.
- Translations for all new strings in every locale; docs updated.
2026-11-07 22:31:14 -07:00
ericz 76232c1ad7 clear contacts and channels before restoring. 2026-11-08 03:15:32 +01:00
ericz 79109c2c5c more granular selection and import of official meshcore file. 2026-11-08 02:47:34 +01:00
tthandClaude Opus 5.5 8a9d9ba0b7 Merge upstream/dev (9 commits) [upstream-sync]
Konflikt v lib/screens/channel_chat_screen.dart: upstream přidal do
_buildMessageBubble parametr showFilterBanner (filtr spamu), my tam máme
terminálový styl. V terminálovém režimu se banner (není spam / skrýt)
vykreslí nad řádkem zprávy, jinak by filtrované zprávy přišly o akce.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 00:43:30 +01:00
zjs81 394df3109b Merge pull request #640 from zjs81/feature/message-filter
Add channel message filter for spam and repeated messages
2026-11-06 00:54:27 -07:00
zjs81 a9d369f42f Address message filter review findings
False positives
- Same-sender repeats need at least 3 words and 10 characters, so short
  replies ("ok", "test") repeated within 10 minutes stay visible.
- Repeated characters needs a run of 20+ of one non-digit character;
  "Noooooooo!", separators, a row of emoji and long numbers are chat.

Correctness
- Rules apply to stored messages: adding a rule hides matching messages
  already in the chat, and removing or disabling one shows again what only
  it was hiding. Other filter reasons are left alone. Also applied when
  history is loaded.
- The filter runs after mesh dedup, inside _addChannelMessage, so each
  message is evaluated and counted by the duplicate tracker once.
- Channels excluded from filtering no longer feed implicit clean examples
  to the classifier.
- Unread counting and the unread anchor treat filtered messages as normal
  when filtering is off for the channel.

Performance
- Classifier training runs in a background isolate (injectable trainer for
  widget tests); app start-up no longer waits for it.
- Reply previews look up the quoted message through an id index instead
  of scanning the channel per bubble.
- The latest-messages channel sort computes each channel's latest visible
  message once.

Cleanup
- Use MessageFilterText.isStructuredPayload instead of a screen copy.

Docs: message-filter.md explains how each check works, including the
learned classifier, and drops the outdated "new messages only" limit.
2026-11-06 00:54:09 -07:00
zjs81 1332c35884 Add channel message filter for spam and repeated messages
Client-side filter for channel messages, with no model download:
- User rules on message text and/or sender name (contains, whole word,
  exact), normalised for case, accents, zero-width and look-alike letters.
- Automatic checks: repeated characters, same-sender repeats within 10
  minutes, and the same sentence (>= 6 words) from 3+ senders within 30
  minutes. Windows use send times, so synced history is not a flood.
- On-device n-gram classifier trained by Mark as spam / Not spam taps.

Filtered messages are kept, never notify or count as unread, are not
auto-translated or used for channel previews, and are concealed in reply
quotes. They show as a calm, collapsible placeholder that animates open
and closed, or can be hidden completely. Includes a Filtered messages
list, per-channel toggle, settings screen, translations for all locales
and documentation.
2026-11-05 23:35:27 -07:00
zjs81 3eeb15cbff Merge pull request #623 from wared2003/issue-622-reset-default-routing-algo-settings
Implements Issue #622: Add ability to reset routing algorithm settings to factory defaults.
2026-11-05 23:09:19 -07:00
upstream-sync-bot 596e7f9dcd Merge upstream/dev (28 commits) [upstream-sync] 2026-11-04 04:51:26 +00:00
tthandClaude Opus 5.5 675342e745 Merge upstream/dev: custom and holiday themes, chat backgrounds
build / ci-image (push) Successful in 9s
build / build (push) Successful in 11m47s
Upstream's theme system (two-color custom themes, holiday themes, picture
icons, chat backgrounds) next to the tth terminal theme:
- a user's custom theme wins; without one, themeMode 'terminal' is still
  the dark theme (main.dart);
- MeshTheme.buildFrom (terminal base) builds with the stock bubble, icon
  and map extensions, like dark()/light();
- terminal avatars also show a theme slot's glyph; the bottom bar stays
  44 px without labels in the terminal theme, 76/60 otherwise;
- map overlays: terminal panels stay square and black, otherwise
  upstream's palette/follow-theme logic; channel list keeps the terminal
  padding.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 16:12:14 +01:00
ericz b82d5d6aab Add online map filtering controls 2026-11-01 14:13:27 +01:00
zjs81 f0ca703dfb Merge remote-tracking branch 'origin/dev' into feat/custom-themes 2026-10-31 13:43:51 -07:00
zjs81 4a574185e8 Add custom themes, holiday themes, chat backgrounds and holiday animations
- Themes: name + background + accent, derived surfaces/text/bubbles; editor
  with live preview; share codes and .jsonl import/export
- Theme icons: swap tab, send, settings, node avatar and map marker icons for
  named icons or pictures (lossless JPEG XL)
- Chat backgrounds per channel/DM (color or JPEG XL picture with fade);
  themes can set one, optionally for every chat
- Map follows custom themes (panels, accent, tile tint, markers)
- Holiday themes (Halloween, Thanksgiving, Christmas, New Year's) with
  generated backgrounds, icons and map markers; automatic switching from
  17 days before each holiday
- Holiday greeting animations (bats, turkeys, Santa, fireworks) matched
  across all app languages via translation strings
2026-10-31 13:43:34 -07:00
edouard 3032be9bad feat: add reset to default for routing algorithm settings (#622)
- Add Reset button in routing settings with Icons.restart_alt
- Extract default values as constants in AppSettings to avoid duplication
- Add translations for all 18 supported languages
- Update documentation in settings.md
2026-10-31 04:53:21 +01:00
ericz 838773ba69 BigPicture image notification again. 2026-10-28 19:10:09 +01:00
tthandClaude Opus 5.5 e8ea12c1c9 Merge upstream/dev: repeater settings from a spec list (#614)
Conflict in repeater_settings_screen.dart: upstream #614 made the
fetch-on-open of the settings screen opt-in (autoFetchRepeaterSettings,
off by default) - what our kFetchRemoteOnOpen did there. Take upstream's
setting so its toggle works; kFetchRemoteOnOpen stays for status,
telemetry and neighbours.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 09:09:26 +01:00
zjs81 705267d98f Build repeater settings from a spec list and stop fetching them on open
Repeater settings:
- Each setting is declared once in repeaterSettingSpecs (key, section,
  input type, range, step, labels); the screen builds its control,
  refresh and save command from that list.
- Add flood.max.advert, flood.max.unscoped, rxdelay, cad, adc.multiplier
  and extra.sf. adc.multiplier and extra.sf note their hardware limits
  (extra.sf is LR2021 only and its get reply has no "> " prefix).
- Settings can be edited before they are fetched; only edited ones are
  sent. set radio needs freq, bw, sf and cr together, so a missing one
  is reported instead of silently skipping the radio.
- Check tx delays against the firmware's 0-2 range.
- Keep the not-loaded hint's list slot so the Advanced card doesn't
  collapse when the first value arrives.
- New "Auto-fetch repeater settings" app setting, off by default: each
  get is a LoRa round trip.

Fixes:
- Adding a discovered contact sent its advert time as lastmod, making it
  the oldest contact; with overwrite-oldest on a full table the next add
  evicted it and it reappeared in the discovered list. Let the radio
  stamp its own clock.
- Snackbars replace each other instead of queueing.

Translations: add the new strings in all locales and fix widespread
mistranslations in hu, ko, sk, sl and uk.
2026-10-25 14:46:31 -07:00
upstream-sync-bot 65097d053d Merge upstream/dev (8 commits) [upstream-sync] 2026-10-25 18:41:24 +00:00
zjs81 82dcab1d92 Fix timeout observations, drop the last-rx feature and evict weak paths
- Record delivery observations with the path of the attempt the ACK
  belongs to, and skip ambiguous ACKs, so a late direct ACK is not
  learned as a flood delivery.
- Remove secondsSinceLastRx from the timeout model: it measured time
  since any companion frame, which was near zero at train and predict.
- When a contact's path history is full, evict the lowest-scoring path
  instead of silently dropping new discoveries.
2026-10-25 11:36:13 -07:00
zjs81 6213da118e Arm the telemetry send ack only after preparing the path
A background retry's RESP_CODE_SENT arriving while the path was being
prepared was taken as the telemetry request's ack, so its tag and timeout
replaced ours and a sensor's tagged reply was rejected.
2026-10-25 11:26:15 -07:00
zjs81 f0144ca959 Show telemetry GPS fixes on the map and add a map location request
Telemetry replies carried a GPS fix that was only shown on the telemetry
screen, so the map kept the node at its last advert position. The fix now
updates the contact and survives radio contact refreshes until the node
adverts again (compared on the node's own advert clock). The map node card
gains an "Update location" button for companions and sensors; repeaters
and rooms only share GPS with logged-in admins, so they don't get it.
2026-10-25 11:10:27 -07:00
tthandClaude Opus 5.5 9489dee1c3 Merge upstream/dev: Android Auto as opt-in flavor, decluttered map overlay
build / build (push) Failing after 3m2s
Conflicts: the manifest keeps our unread widget receiver and drops the
Android Auto meta-data, which upstream moved to the androidAuto source set
(fe7e72a). Rename detection had moved our unread_widget_info.xml into that
source set with it; it stays in main. _mapChip is gone upstream with the
map overlay declutter (ed5884e), so our terminal-theme restyle of it goes
too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:00:11 +01:00
zjs81 603172b3ec Batch per-frame persistence so busy meshes don't stall the UI isolate
Every received packet copy re-saved its channel's whole history, every
unread change re-saved the channel list, and adverts/path records re-saved
full contact and path-history blobs. Under load the SharedPreferences
backlog starved the Dart event loop (frames and timers stopped), the radio's
offline queue overflowed, and CPU stayed pinned after traffic ended.

- Add CoalescedWrites: keeps the latest write per key and runs them once
  per window (750 ms; 5 s for path history). Writes start synchronously so
  stores still read the current scoped key.
- Flush before the app is backgrounded, on disconnect, before switching
  radios, before the channel slot map changes, before channel history
  reloads, before deleteChannel drops a list, and before path history
  reloads an evicted contact.
- Cap in-memory channel history at ChannelMessageStore.maxStoredMessages;
  storage already kept only that many, but the list grew unbounded during a
  session and every save grew with it.
- Cache Contact.publicKeyHex and build pubKeyToHex from a hex-digit lookup; it was
  rebuilt on every equality/hash and per-advert contact scan.

Load test (fake TCP radio, 350 contacts, 17 channels, 10-150 packets/s,
Linux profile build): CPU at 10 packets/s 104% -> 45%, recovers to idle
after traffic instead of staying at 160%, and queued messages drained went
from 555 to 3237 over the same run.
2026-10-24 23:38:28 -07:00
zjs81 a4670a9275 Add a setting to show link images in all chats by default
'Show link images in all chats by default' (default off) applies to
every channel and contact without an explicit per-chat choice: the
per-chat setting is now unset/on/off and resolves to perChat ?? default.
The 'Load images from links' master switch still overrides it.
2026-10-24 22:01:30 -07:00
zjs81 79e3668c18 Add a global switch to stop loading images from links
'Load images from links' (default on) gates every link image fetch in
MessageUrlImageHelper: chat previews, notification images, ipfs://
resolution and pyx/ibb scraping. Per-chat toggles keep their values but
are disabled while it is off. IPFS uploads are unaffected.
2026-10-24 22:01:29 -07:00
zjs81 7e7e7a48db Merge remote-tracking branch 'origin/dev' into pr-593
# Conflicts:
#	lib/models/app_settings.dart
#	lib/screens/channel_chat_screen.dart
#	lib/screens/chat_screen.dart
#	untranslated.json
2026-10-24 21:45:13 -07:00
zjs81 21098f1c34 Merge branch 'dev' into feat/dns-node-banner 2026-10-24 21:38:46 -07:00
zjs81 69693f5a89 Accept plain-text values in the node banner record
Only ';' needs encoding, so the title and body fit in one TXT string.
Values that aren't valid percent-encoding are used as-is instead of
hiding the banner.
2026-10-24 21:33:14 -07:00
zjs81 ee382f9177 Configure the connect screen's node banner from a DNS TXT record
The "get a node" banner's link, and optionally its title, body and button
text, now come from the _banner.meshcoreopen.org TXT record, looked up
over Cloudflare DNS-over-HTTPS and cached for the record's TTL (1 min to
6 h). The record is `v=1;on=1;url=<https link>` with URL-encoded values;
`on=0`, a missing record or any lookup failure hides the banner.
2026-10-24 21:29:08 -07:00
zjs81 7c2f481520 Merge remote-tracking branch 'origin/dev' into fix/ui-issues
# Conflicts:
#	untranslated.json
2026-10-24 21:13:02 -07:00
zjs81 471a2b6a5e Merge branch 'dev' into issue-37-selective-notifs 2026-10-24 21:04:26 -07:00
zjs81 1e786b24ba Make the map path trace builder explicit and keep its state
The builder panel now labels its actions, lets the user pick round trip
or as-entered with an explanation, and only sends when "Run path trace"
is pressed. Hops, mode and the last result are kept in UiViewStateService
for the session, so going back no longer clears them and the last result
can be reopened without sending again.
2026-10-24 21:02:19 -07:00