56 Commits
Author SHA1 Message Date
tthandClaude Opus 5.5 5edb1f3ab7 OTA: take the package from the latest meshcore-tth release by itself
build / ci-image (push) Successful in 12m58s
build / build (push) Successful in 11m54s
With no file chosen, the node's target (`fw ver`) and image (`fw status`
/ `fw base`) pick the delta from manifest.json of the latest public
release on git.rfa.cz; it is checked against SHA256SUMS (the node checks
the manifest signature itself). Choosing .mcfw files stays for own
builds.

Bench 16. 11. 2026: a node on v1.18.0+tth.20261115.2 got the delta to
20261116 found and downloaded by the app, over the side channel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 23:45:48 +01:00
tthandClaude Opus 5.5 1b2e0ccdfc Add OTA firmware updates of meshcore-tth nodes, with a side channel
A "Firmware update (OTA)" tile in the repeater hub (admins, tth fork
switch kOtaUpdate) pushes a delta of a meshcore-tth -ota image over the
mesh: the package that starts from the node's image is picked from the
chosen .mcfw files, binary chunks with text as the fallback, an airtime
budget, verify and apply. Optionally on a side channel: the node goes to
another preset by tempradio, the companion follows (checked), the chunks
go zero-hop and both come back at the end.

A port of the reference engine of the tth.meshcore Ansible collection
(module_utils/meshcore_ota_engine.py); test/services/ota/ota_vectors.json
is its test-vector file. Bench 16. 11. 2026: the connector over TCP to a
USB companion, side channel 866.0/SF7, applied a 2.7 kB delta, 20 s
airtime, companion back on its preset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 23:32:04 +01:00
zjs81 89071473a5 Merge branch 'dev' into ez_bookmark 2026-11-15 15:16:18 -07:00
zjs81 69421243cf Merge pull request #661 from ericszimmermann/ez_backup-restore_2
Small bugfix for Restore
2026-11-15 15:14:11 -07:00
zjs81 53e4e457ca Preview image versions before sending, and repair unheard chunks
Send sheet: opens on what recipients will see (the encoded photo decoded
on this device) instead of the original. "Try another version" encodes
the whole photo again with a near-invisible zoom/shift; the generative
decoder reconstructs each version differently, and on Kodak the best of
three raised CLIP agreement from 0.828 to 0.853. The user picks the
version to send; packet count and airtime follow the selection. Version 1
is byte-identical to the previous encode, so the wire format is
unchanged. The sender's bubble shows the chosen version and carries the
AI-reconstructed label.

Repeater echoes: the raw RX log handler now decrypts GRP_DATA as well as
GRP_TXT and counts repeaters re-flooding each chunk of our own images.
The bubble shows the repeat count like channel text, and Packet info
lists each packet. About 15 s after sending, chunks no repeater echoed
are resent once, but only when another chunk of the same image was
echoed, so senders with no repeater in earshot do not double their
airtime. Outgoing entries now record their payload size.
2026-11-14 20:58:43 -07:00
ericz 6c29aea7e0 backup and restore of bookmarks. 2026-11-13 23:21:21 +01:00
ericz 37bfdd47fe Fix backup restore settings and ordering
Apply restored eviction and list sorting settings before reloading data; stabilize the message-filter ingestion test against queued review history.
2026-11-13 19:28:23 +01:00
zjs81 2d56d5e349 Store histories and the tile index in SQLite
Message, channel and route histories move from whole-blob preferences to
indexed SQLite rows on native platforms, so chats page from storage instead
of loading a full conversation. Web keeps the preferences store. Existing
histories are imported once on the first launch.

Linux and Windows keep the map tile index in SQLite and import the old JSON
index on first use.

Unreadable legacy data no longer blocks saves, migrations or startup: it is
left in place and skipped. If the database cannot be opened, the run keeps
histories in preferences and the next launch merges them in.

Also adds a performance profiling reference and a script that clears the
Dart HTTP profile.
2026-11-09 22:32:40 -07:00
zjs81 462159e803 Tester feedback: offline mode, pt-PT, menus, layout and translations
Offline (read-only) mode
- The last connected radio is remembered; with no radio the app opens on
  its saved contacts, channels, messages and unread counts.
- Main screens stay open on disconnect. A Connect button replaces the
  battery and signal indicators, with a sheet to reconnect, choose a
  radio or stop a pending reconnect.
- While disconnected everything is read-only: the composer becomes a
  "connect to send" bar (drafts kept) and controls that change the radio
  or stored history are disabled or hidden.
- Resending while disconnected no longer deletes the message; a
  different radio no longer shows the previous radio's channels.
- Notification taps open the saved chat while offline.

Chats and menus
- Channel chat menu: notifications, edit channel, delete channel; the
  filter row lines up with the others; bell moved out of the app bar.
- DM and room menus: remove from contacts; rooms get room management.
- Search field uses the full app bar; long-press a result to copy.
- Hashtag channel titles no longer read "# #name"; more room around the
  radio activity dot.
- Repeat filter: short messages from one sender are caught at the same
  count as long ones.

Layout
- Shared menu row (wraps to two lines) and segment label (never splits
  a word) used across the app.
- One Scan button on the scanner; consistent settings tile titles;
  contact "last seen" wraps instead of truncating; unfetched repeater
  settings are dimmed.

Localization
- New European Portuguese locale (pt_PT); regional locales are handled
  by the language picker, notifications and the background service.
- Fill 67 missing strings per locale, including backup and restore.
- Keep "Flood" and "Zero Hop" untranslated, shorten "last seen" and
  routing labels, and fix mistranslated scan, theme and hop strings.
- Received-image strings, badge and caption come from translations.
- Regenerate the Czech localizations, which were missing strings.

Docs
- Add documentation/design.md (UI reference) and offline-mode.md;
  update channel, chat, navigation and scanner docs.
2026-11-09 21:18:29 -07:00
zjs81 47f2293a5c Merge pull request #646 from ericszimmermann/ez_backup-restore
Backup and Restore functionality
2026-11-09 07:08:40 -07:00
zjs81 5ea44d6ce9 Tester feedback: routing, bulk select, notifications, map crash
Routing
- Auto routing picks routes by Thompson sampling over faded delivery
  stats (24 h half-life, capped evidence), weighted by what the radio
  currently hears; retries prefer a different route; last attempt floods.
- Route failures are held until a message's fate is known, so an offline
  contact no longer wrecks its route history; failing routes are only
  deleted after a week without a delivery.
- Direct (zero-hop) path is a rotation candidate (#643) and a new Direct
  mode in the routing sheet; history routes are used for repeater logins.
- Remove the route-weight sliders the new chooser no longer uses.

Chats
- Bulk selection in channel chats (spam / not spam / delete / copy) and
  in the Filtered messages list.
- Tapping a search result jumps to the message.
- Swipe-to-reply ignores vertical scrolls.
- Active conversation follows route lifecycle, so covered chats count
  unread again.

Notifications
- Tapping a notification opens its conversation.
- Per-conversation coalescing and one alert per queued-message sync.
- Monochrome status-bar icon; background service stops when the app is
  swiped away; stale notifications cleared on radio or slot change.

Other
- Online map: opaque links and painted dots for dense areas to avoid an
  Impeller GPU crash; expandable hop list on path maps.
- Contact share: clipboard import of shared contacts, "Add again".
- Android: enableEdgeToEdge and scrolling-screenshot support.
- Translations for all new strings; fix mistranslated routing labels.
2026-11-08 23:19:15 -07:00
ericz a020eb30d0 ask for download models and fix problem with reloading discovered list after import. 2026-11-08 14:13:33 +01:00
zjs81 ddf0b9f553 Fix false repeat flags, add repeat-sends setting, limit holiday animations
Message filter:
- Ignore copies of a message already seen (same sender, text and send
  second). Switching between companions re-synced messages the first one
  had delivered; they missed per-radio storage dedup and were flagged as
  repeats.
- Exempt replies and @[name] mentions from repeat detection.
- New "Sends to count as a repeat" setting (2-5, default 2). Each send
  must fall within 10 minutes of the previous one.
- Translations for the new strings in all locales.

Holiday animations:
- Only one plays at a time; greetings arriving while one is playing or
  within 5 seconds after it ends are dropped, not queued.
- Christmas map "self" marker: Santa hat was upside down.
2026-11-08 01:33:05 -07:00
zjs81 80ead2fc2d Address review: trace request size and contact-share translation
- Manual path trace validates the request that will actually be sent
  (round trips become 2n-1 hops, 3-byte hops go out as 4-byte prefixes)
  against the 172-byte frame and 64-hop firmware limits, and disables Run
  with an explanation when it does not fit. PathTraceMapScreen also refuses
  to send an oversized request.
- Contact-share tokens are never passed through message translation, so
  the share cannot be mangled before sending.
2026-11-07 22:53:42 -07:00
ericz 79109c2c5c more granular selection and import of official meshcore file. 2026-11-08 02:47:34 +01:00
zjs81 a9d369f42f Address message filter review findings
False positives
- Same-sender repeats need at least 3 words and 10 characters, so short
  replies ("ok", "test") repeated within 10 minutes stay visible.
- Repeated characters needs a run of 20+ of one non-digit character;
  "Noooooooo!", separators, a row of emoji and long numbers are chat.

Correctness
- Rules apply to stored messages: adding a rule hides matching messages
  already in the chat, and removing or disabling one shows again what only
  it was hiding. Other filter reasons are left alone. Also applied when
  history is loaded.
- The filter runs after mesh dedup, inside _addChannelMessage, so each
  message is evaluated and counted by the duplicate tracker once.
- Channels excluded from filtering no longer feed implicit clean examples
  to the classifier.
- Unread counting and the unread anchor treat filtered messages as normal
  when filtering is off for the channel.

Performance
- Classifier training runs in a background isolate (injectable trainer for
  widget tests); app start-up no longer waits for it.
- Reply previews look up the quoted message through an id index instead
  of scanning the channel per bubble.
- The latest-messages channel sort computes each channel's latest visible
  message once.

Cleanup
- Use MessageFilterText.isStructuredPayload instead of a screen copy.

Docs: message-filter.md explains how each check works, including the
learned classifier, and drops the outdated "new messages only" limit.
2026-11-06 00:54:09 -07:00
zjs81 1332c35884 Add channel message filter for spam and repeated messages
Client-side filter for channel messages, with no model download:
- User rules on message text and/or sender name (contains, whole word,
  exact), normalised for case, accents, zero-width and look-alike letters.
- Automatic checks: repeated characters, same-sender repeats within 10
  minutes, and the same sentence (>= 6 words) from 3+ senders within 30
  minutes. Windows use send times, so synced history is not a flood.
- On-device n-gram classifier trained by Mark as spam / Not spam taps.

Filtered messages are kept, never notify or count as unread, are not
auto-translated or used for channel previews, and are concealed in reply
quotes. They show as a calm, collapsible placeholder that animates open
and closed, or can be hidden completely. Includes a Filtered messages
list, per-channel toggle, settings screen, translations for all locales
and documentation.
2026-11-05 23:35:27 -07:00
zjs81 f0ca703dfb Merge remote-tracking branch 'origin/dev' into feat/custom-themes 2026-10-31 13:43:51 -07:00
zjs81 4a574185e8 Add custom themes, holiday themes, chat backgrounds and holiday animations
- Themes: name + background + accent, derived surfaces/text/bubbles; editor
  with live preview; share codes and .jsonl import/export
- Theme icons: swap tab, send, settings, node avatar and map marker icons for
  named icons or pictures (lossless JPEG XL)
- Chat backgrounds per channel/DM (color or JPEG XL picture with fade);
  themes can set one, optionally for every chat
- Map follows custom themes (panels, accent, tile tint, markers)
- Holiday themes (Halloween, Thanksgiving, Christmas, New Year's) with
  generated backgrounds, icons and map markers; automatic switching from
  17 days before each holiday
- Holiday greeting animations (bats, turkeys, Santa, fireworks) matched
  across all app languages via translation strings
2026-10-31 13:43:34 -07:00
ericz f415f0ad4e remove non Hotlink ipfs gateways 2026-10-28 18:48:48 +01:00
zjs81 82dcab1d92 Fix timeout observations, drop the last-rx feature and evict weak paths
- Record delivery observations with the path of the attempt the ACK
  belongs to, and skip ambiguous ACKs, so a late direct ACK is not
  learned as a flood delivery.
- Remove secondsSinceLastRx from the timeout model: it measured time
  since any companion frame, which was near zero at train and predict.
- When a contact's path history is full, evict the lowest-scoring path
  instead of silently dropping new discoveries.
2026-10-25 11:36:13 -07:00
zjs81 603172b3ec Batch per-frame persistence so busy meshes don't stall the UI isolate
Every received packet copy re-saved its channel's whole history, every
unread change re-saved the channel list, and adverts/path records re-saved
full contact and path-history blobs. Under load the SharedPreferences
backlog starved the Dart event loop (frames and timers stopped), the radio's
offline queue overflowed, and CPU stayed pinned after traffic ended.

- Add CoalescedWrites: keeps the latest write per key and runs them once
  per window (750 ms; 5 s for path history). Writes start synchronously so
  stores still read the current scoped key.
- Flush before the app is backgrounded, on disconnect, before switching
  radios, before the channel slot map changes, before channel history
  reloads, before deleteChannel drops a list, and before path history
  reloads an evicted contact.
- Cap in-memory channel history at ChannelMessageStore.maxStoredMessages;
  storage already kept only that many, but the list grew unbounded during a
  session and every save grew with it.
- Cache Contact.publicKeyHex and build pubKeyToHex from a hex-digit lookup; it was
  rebuilt on every equality/hash and per-advert contact scan.

Load test (fake TCP radio, 350 contacts, 17 channels, 10-150 packets/s,
Linux profile build): CPU at 10 packets/s 104% -> 45%, recovers to idle
after traffic instead of staying at 160%, and queued messages drained went
from 555 to 3237 over the same run.
2026-10-24 23:38:28 -07:00
zjs81 21098f1c34 Merge branch 'dev' into feat/dns-node-banner 2026-10-24 21:38:46 -07:00
zjs81 69693f5a89 Accept plain-text values in the node banner record
Only ';' needs encoding, so the title and body fit in one TXT string.
Values that aren't valid percent-encoding are used as-is instead of
hiding the banner.
2026-10-24 21:33:14 -07:00
zjs81 ee382f9177 Configure the connect screen's node banner from a DNS TXT record
The "get a node" banner's link, and optionally its title, body and button
text, now come from the _banner.meshcoreopen.org TXT record, looked up
over Cloudflare DNS-over-HTTPS and cached for the record's TTL (1 min to
6 h). The record is `v=1;on=1;url=<https link>` with URL-encoded values;
`on=0`, a missing record or any lookup failure hides the banner.
2026-10-24 21:29:08 -07:00
zjs81 caf20b4415 Summarize location, image and GIF messages in notifications
Notification bodies now use the chat's parsers to show a localized
summary for shared locations (m: markers), channel images, GIFs and
reactions instead of the raw payload. The marker parser moves out of the
map screen into helpers/marker_message.dart so the service can use it.
2026-10-24 21:01:06 -07:00
zjs81 92b147bd49 Format tcp_transport_service_native_test 2026-10-24 20:57:30 -07:00
zjs81 e614fb32e2 Address review: consent race, unsigned advert bytes, antimeridian
- Uploads carry a consent generation: nothing is sent if sharing is
  turned off while a batch is being prepared, and a late response never
  touches a queue that was cleared and refilled
- Parse only the signed 32 advert app-data bytes, as the firmware does,
  so appended unsigned bytes can't add the hidden marker or change the
  name
- Split online map requests that cross the antimeridian into two valid
  boxes and merge the results
- README: link the network map next to the website
2026-10-11 22:09:08 -07:00
zjs81 49582d3f07 Format tcp transport test for the current stable formatter 2026-10-11 22:05:29 -07:00
zjs81 c18b509d7e Merge remote-tracking branch 'origin/dev' into feat/network-map
# Conflicts:
#	lib/connector/meshcore_connector.dart
2026-10-11 21:55:22 -07:00
zjs81 bc14de586f Add opt-in network map uploads and online map view
- Opt-in upload of header-only packet records and repeater/room server
  adverts to map.meshcoreopen.org about once a minute; payloads, channel
  and DM hashes and transport codes are stripped on the phone, locations
  snapped to a ~2 km grid, install ID rotates daily
- One-time opt-in dialog on first radio connection; toggle and status in
  App settings
- Local / Online / Both switch on the map screen with online repeater
  hexagons, links, add-to-contacts and manage
- Node purchase banner on the connect screen (affiliate link, disclosed)
- Privacy policy and network map documentation
- Translations for all locales
2026-10-11 21:54:16 -07:00
zjs81 679116ed03 Key per-channel storage by PSK-derived channel ID
Channel messages, settings, region, order and images were persisted by
radio slot index, so a slot reused for a different channel inherited the
old channel's history and settings (#359).

- Channel.storageId: first 8 bytes of SHA-256("meshcore-channel:" + psk).
- All per-channel stores key by channel ID; in-memory state stays by slot.
- The connector keeps a slot -> channel ID map, diffs it against the saved
  map on every channel sync and reloads slots whose channel changed.
- Queued channel frames wait until this session's map is confirmed.
- One-shot per-radio migration from slot keys, using the cached channel
  list the legacy data was written under; rerun-safe if interrupted.
- Deleting a channel clears its data; a channel removed elsewhere keeps its
  history and gets it back when re-added. A PSK edit keeps its place in
  the custom order.
- Slots sharing a PSK share history and settings.
- Image entries record their channel ID; a slot change resets that slot's
  in-progress reassembly.
2026-10-11 17:52:59 -07:00
zjs81 616c433922 Let entry cap remove spent outgoing images; clarify channel row arrival ordering
Outgoing image entries were excluded from the maxEntries cap, and age
eviction only marks them evicted, so frequent senders accumulated entries
and sidecars without bound. Outgoing entries with nothing left on disk (or
failed) are now eligible, oldest first.

Rename _ChannelChatRow.timestamp to receivedAt: it already returned the
local arrival time used for sorting and day separators.
2026-10-11 01:37:36 -07:00
zjs81 25f197c979 Fix review findings, add default flood scope, and address recent issues
Review fixes:
- Keep stored message history beyond the 200-message window; stop
  messages leaking between radios; reset link/session state on disconnect
- Accept firmware's 176-byte RX frames over USB/TCP
- Hold APP_START during contact sync; contact-sync watchdog; replay DMs
  from not-yet-known senders; tombstone late command replies; finish
  channel sync on ERR_NOT_FOUND; fail region-scoped sends cleanly
- DM retry watchdog when RESP_CODE_SENT never arrives; late repeater CLI
  replies; ACK hash collisions; UTF-8-safe name truncation
- Image pipeline: delete-during-decode, lifecycle cancels, decoder memory
  release, entry cap, dead worker recovery, atomic model writes
- Storage: deterministic reaction hash across web/native, Smaz
  double-decode, per-entry parsing, per-radio path history and regions,
  review-mode data isolation
- UI: safe channel slot selection, byte-length name limits, double-send
  guard, mounted checks, localized hardcoded strings
- Skip persisted-store reload on repeat SELF_INFO

Features:
- Radio default flood scope (firmware ver 11+) and explicit unscoped
  sends (ver 12+)
- Scan for nearby nodes (#570)
- Optional distinct first-hop repeater counting for channel resend (#589)
- Optional region next to hop count (#580)

Issues:
- Message text follows system font size (#569)
- Repeater/room password field accepts 20 chars (#576)
- TCP auto-reconnect and keepalive (#571)
- Order feeds by local receive time; flag future timestamps (#584)
- Coding rate help text (#568), French "Favoris" (#575)
- iOS/macOS app badge now clears

Translations for all new strings in every locale.
2026-10-11 01:25:31 -07:00
zjs81 25f8d6ae27 Add notification replies, Android Auto support, and channel mute bell
- Message notifications use Android MessagingStyle with Reply, Mark as read,
  and Mute channel actions, so they work in Android Auto and on watches
- Replies go through the normal send path (length limits, SMAZ, Cyr2Lat,
  retries), split into up to 3 messages, and report failures
- Declare Android Auto notification support and register the action receiver
- Add a bell icon to channel chat to mute/unmute; unify the channel mute key
  so unnamed channels mute correctly
- Update README and docs for Android Auto support
2026-09-27 21:55:43 -07:00
Zach d74587c167 Refactor LoRa airtime tests and add new functionality
- Updated LoRa airtime calculations in `lora_airtime_test.dart` to reflect new reference values.
- Introduced new tests for LDRO behavior and preamble symbol calculations.
- Added `contact_path_width_test.dart` to validate path hash width handling in contacts.
- Enhanced `model_changes_test.dart` to ensure legacy data migration works correctly.
- Created `remote_node_stats_test.dart` to decode and validate remote node statistics.
- Implemented `map_marker_parse_test.dart` for parsing marker text with coordinate validation.
- Developed `map_tile_cache_key_test.dart` to ensure API keys are excluded from cache keys.
- Added `message_retry_failure_test.dart` to test message retry service behavior on failures.
- Extended `path_history_service_test.dart` to preserve learned state across path attempts.
- Enhanced `received_image_store_test.dart` to handle concurrent writes and review fixes.
- Implemented `repeater_command_service_test.dart` to validate command response handling.
- Created `store_tolerant_parsing_test.dart` to ensure stores skip malformed records gracefully.
- Cleared untranslated JSON file for localization updates.
2026-09-25 10:01:18 -07:00
hdhog d791570213 fix: use explicit time <epoch> for repeater clock sync
Companion firmware (MeshCore commit 4a869163, 2025-12-30) replaces the
CLI frame timestamp with the companion node's RTC for TXT_TYPE_CLI_DATA,
so "clock sync" sets the repeater clock to the node RTC. Nodes with a
wrong RTC push repeater clocks years into the future; firmware cannot
set the clock backwards without clkreboot.

- RepeaterCommandService: translate "clock sync" to "time <phone epoch>"
  before sending, matching official meshcore-cli behavior
- repeater login dialog: send "time <epoch>" for auto clock sync after
  login (this path bypasses RepeaterCommandService)
- add unit tests for the command translation

Ref: https://github.com/zjs81/meshcore-open/issues/464
2026-09-09 22:31:11 +04:00
zjs81 cf6c93c50a rebuild translations 2026-08-11 00:15:45 -07:00
Zach eee72b4c65 Add ability to send images over lora 2026-08-10 23:20:46 -07:00
PacoX 445a18a83f Fix failed test 2026-06-16 15:01:10 +02:00
just-stuff-tm 4e368d562d add selectable LOS obstruction pinning for repeater placement 2026-04-25 08:56:28 -04:00
just_stuff_tm 7de07c023f Merge branch 'main' into fix/linux-ble-pairing-flow 2026-03-24 02:24:28 -04:00
Winston Lowe 58252b8a40 fix: Correct return type of _manualAckHash and improve hash computation 2026-03-23 10:14:30 -07:00
Winston Lowe 767dc1164e refactor: Replace string reading methods with CString equivalents and improve error handling 2026-03-22 10:50:11 -07:00
just-stuff-tm 29660d520e feat: Linux BLE pairing support via bluetoothctl
Add Linux BLE pairing helper that drives bluetoothctl for pair/trust/PIN
entry, with Completer-based flow control, explicit retry loop, and named
timeout constants.

- LinuxBlePairingService: pair-and-trust with up to 2 retries
- LinuxBleErrorClassifier: map bluetoothctl stderr to user-facing errors
- Conditional import stub for web builds (dart.library.io gate)
- Scanner screen: PIN dialog integration for Linux pairing flow
- MeshCoreConnector: Linux pairing/recovery/reconnect wiring
- l10n: 4 new pairing keys across all 14 locales
- 12 unit tests (pairing service + error classifier)
2026-03-21 20:59:53 -04:00
zjs81 4ad4a93a20 formatted code 2026-03-20 01:55:08 -07:00
zjs81 4962a48e64 Msg Retry fixes, channel message fixes. Notification fixes. Make more desktop friendly. Enhance retry algo. Fix predicted location clustering add retries to reactions and fix the reactions in private DMS centralize and cleanup code in var areas 2026-03-20 01:54:31 -07:00
zjs81 b336aedbc5 fix: address PR #296 code review feedback
- Clamp ML predictions between physics floor (raw airtime) and ceiling
  (worst-case formula) so model can never produce unsafe timeouts
- Replace hourOfDay feature with secondsSinceLastRx for network activity
- Remove unused _ContactStats.stdDev and dead model persistence code
- Debounce observation writes (2s) instead of writing on every delivery
- Skip recording observations when pathLength is null to avoid corrupting
  training data
- Add comment explaining global (not per-contact) RX time tracking
- Remove notifyListeners from retrain to avoid unnecessary widget rebuilds
- Run dart format
2026-03-14 17:32:08 -07:00
zjs81 2ee2358ecc feat: add ML-based adaptive timeout prediction using LinearRegressor
Train a linear regression model on actual message delivery times to
predict tighter timeouts, replacing worst-case physics estimates.
Features: path length, message bytes, seconds since last RX, flood mode.
Global model with per-contact blending after 10+ observations per contact.
Falls back to existing physics formula when model has insufficient data.
2026-03-14 16:56:11 -07:00
just-stuff-tm 7a2bb20bf7 feat: Add TCP connection support and UI integration
- Implemented TCP transport service for native platforms.
- Added TCP connection screen with input fields for host and port.
- Integrated TCP connection options into the scanner and USB screens.
- Updated localization files for new TCP-related strings.
- Added tests for TCP connection flow and error handling.
- Enhanced USB screen to include TCP connection option.
- Improved layout to ensure no overflow in narrow widths for scanner and USB screens.
2026-03-07 20:07:19 -05:00