Files
meshcore-open/documentation
zjs81 53e4e457ca Preview image versions before sending, and repair unheard chunks
Send sheet: opens on what recipients will see (the encoded photo decoded
on this device) instead of the original. "Try another version" encodes
the whole photo again with a near-invisible zoom/shift; the generative
decoder reconstructs each version differently, and on Kodak the best of
three raised CLIP agreement from 0.828 to 0.853. The user picks the
version to send; packet count and airtime follow the selection. Version 1
is byte-identical to the previous encode, so the wire format is
unchanged. The sender's bubble shows the chosen version and carries the
AI-reconstructed label.

Repeater echoes: the raw RX log handler now decrypts GRP_DATA as well as
GRP_TXT and counts repeaters re-flooding each chunk of our own images.
The bubble shows the repeat count like channel text, and Packet info
lists each packet. About 15 s after sending, chunks no repeater echoed
are resent once, but only when another chunk of the same image was
echoed, so senders with no repeater in earshot do not double their
airtime. Outgoing entries now record their payload size.
2026-11-14 20:58:43 -07:00
..
2026-11-01 15:05:12 -07:00

MeshCore Open - Feature Documentation

MeshCore Open is an open-source Flutter client for MeshCore LoRa mesh networking devices. These guides describe current user-facing features and their requirements. Reviewed against app 9.5.0+18 on October 11, 2026. Hardware behavior still depends on platform, radio, and firmware.

Start here

  1. Use compatible MeshCore companion firmware and connect a radio.
  2. Wait for synchronization, then open a channel or contact chat.
  3. For scoped floods, configure regions. For image packets, install the image model.
  4. If a device or feature is unavailable, use troubleshooting.

Table of Contents

  1. Scanner & Connection - BLE scanning, USB serial, and TCP connection with automatic reconnect
  2. Navigation - App flow, device screen, and quick-switch navigation
  3. Contacts - Contact management, groups, discovery, nearby-node scan, discovered-contact import/export, and sharing
  4. Chat & Messaging - Direct messages, location sharing, message status, reactions, and retries
  5. Channels - Broadcast channels, communities, channel chat, and auto-resend
  6. Map & Location - Node map, shared pins, path tracing, line-of-sight, and offline caching
  7. Settings - Device settings, app settings, radio configuration, backup/restore, and exports
  8. Notifications - System notifications, replies from watches and Android Auto, unread badges, and notification preferences
  9. Repeater Management - Repeater hub, status, CLI, telemetry, and neighbors
  10. Additional Features - GIF picker, localization, debug logs, SMAZ compression, and more
  11. Routing Paths - Path encoding, validation, device capability detection, and storage
  12. BLE Protocol & Data Layer - Technical reference for the communication protocol and data architecture
  13. Regions - App and radio default regions, unscoped sends, message labels, and reply regions
  14. Image Messages - Model setup, mesh image sending, recovery, and reconstruction
  15. Companion Radio Statistics - Noise, signal metrics, and airtime
  16. Troubleshooting - BLE, USB, browser, and firmware issues
  17. Review Mode - Simulated radio and reviewer instructions for Google Play and App Store review
  18. Network Map - Online repeater map, adding and managing repeaters from it, opt-in uploads, and hiding a repeater
  19. Themes - Color themes, custom icons and map markers, chat backgrounds, automatic holiday themes, and holiday message animations
  20. Message Filter - Hide spam and repeated channel messages with your own rules, automatic checks, and learning from Spam taps, all on the device
  21. UI Design Reference - Contributor reference: theme, typography, spacing, shared widgets, sheets vs dialogs vs pages, states, and localization rules for UI changes
  22. Offline Mode - Read-only view of the last radio's contacts, channels and messages while no radio is connected, and the Connect sheet
  23. Performance Profiling - Contributor reference: frame and memory baselines, HTTP capture retention, and resetting diagnostic recordings

App Overview

MeshCore Open connects to MeshCore LoRa mesh radios over BLE, USB, or TCP. Once connected, users can:

  • Chat with other mesh nodes via encrypted direct messages
  • Broadcast on shared channels (public, hashtag, private, or community-scoped)
  • View nodes on a map with GPS locations, predicted positions, and path traces
  • Manage repeaters with CLI access, telemetry, neighbor info, and settings
  • Share contacts via meshcore:// URIs and QR codes
  • Share locations as map pins from chat or the map
  • Scan for nearby nodes and import/export discovered contacts
  • Configure radio settings including frequency, power, bandwidth, and spreading factor
  • Cache offline maps for use without internet connectivity
  • Analyze line-of-sight between nodes with terrain elevation profiles
  • Filter spam in channels with your own rules and automatic on-device checks
  • Use Android Auto to hear new messages and reply by voice while driving (Android)

What needs internet?

Feature Internet requirement
Radio messaging, region-scoped sends No internet needed for the mesh transport
Mesh image encoding/reconstruction Local after model installation
On-device translation Local after model installation
Model downloads Internet required
GIF search/display, URL image previews, and IPFS image/file uploads Internet required to upload or retrieve content
Map display Cached tiles work offline; uncached tiles need internet
Online network map and opt-in uploads Internet required
Terrain LOS analysis Elevation lookup needs internet unless the required data is already cached

Keeping documentation current

When changing a feature, update its access steps, defaults, platform/firmware requirements, failure states, and screenshots. Keep binary framing details in the protocol reference and implementation links. See contribution guidelines.