Files
meshcore-open/documentation
zjs81 a9d369f42f Address message filter review findings
False positives
- Same-sender repeats need at least 3 words and 10 characters, so short
  replies ("ok", "test") repeated within 10 minutes stay visible.
- Repeated characters needs a run of 20+ of one non-digit character;
  "Noooooooo!", separators, a row of emoji and long numbers are chat.

Correctness
- Rules apply to stored messages: adding a rule hides matching messages
  already in the chat, and removing or disabling one shows again what only
  it was hiding. Other filter reasons are left alone. Also applied when
  history is loaded.
- The filter runs after mesh dedup, inside _addChannelMessage, so each
  message is evaluated and counted by the duplicate tracker once.
- Channels excluded from filtering no longer feed implicit clean examples
  to the classifier.
- Unread counting and the unread anchor treat filtered messages as normal
  when filtering is off for the channel.

Performance
- Classifier training runs in a background isolate (injectable trainer for
  widget tests); app start-up no longer waits for it.
- Reply previews look up the quoted message through an id index instead
  of scanning the channel per bubble.
- The latest-messages channel sort computes each channel's latest visible
  message once.

Cleanup
- Use MessageFilterText.isStructuredPayload instead of a screen copy.

Docs: message-filter.md explains how each check works, including the
learned classifier, and drops the outdated "new messages only" limit.
2026-11-06 00:54:09 -07:00
..
2026-11-01 15:05:12 -07:00

MeshCore Open - Feature Documentation

MeshCore Open is an open-source Flutter client for MeshCore LoRa mesh networking devices. These guides describe current user-facing features and their requirements. Reviewed against app 9.5.0+18 on October 11, 2026. Hardware behavior still depends on platform, radio, and firmware.

Start here

  1. Use compatible MeshCore companion firmware and connect a radio.
  2. Wait for synchronization, then open a channel or contact chat.
  3. For scoped floods, configure regions. For image packets, install the image model.
  4. If a device or feature is unavailable, use troubleshooting.

Table of Contents

  1. Scanner & Connection - BLE scanning, USB serial, and TCP connection with automatic reconnect
  2. Navigation - App flow, device screen, and quick-switch navigation
  3. Contacts - Contact management, groups, discovery, nearby-node scan, discovered-contact import/export, and sharing
  4. Chat & Messaging - Direct messages, location sharing, message status, reactions, and retries
  5. Channels - Broadcast channels, communities, channel chat, and auto-resend
  6. Map & Location - Node map, shared pins, path tracing, line-of-sight, and offline caching
  7. Settings - Device settings, app settings, radio configuration, and exports
  8. Notifications - System notifications, replies from watches and Android Auto, unread badges, and notification preferences
  9. Repeater Management - Repeater hub, status, CLI, telemetry, and neighbors
  10. Additional Features - GIF picker, localization, debug logs, SMAZ compression, and more
  11. Routing Paths - Path encoding, validation, device capability detection, and storage
  12. BLE Protocol & Data Layer - Technical reference for the communication protocol and data architecture
  13. Regions - App and radio default regions, unscoped sends, message labels, and reply regions
  14. Image Messages - Model setup, mesh image sending, recovery, and reconstruction
  15. Companion Radio Statistics - Noise, signal metrics, and airtime
  16. Troubleshooting - BLE, USB, browser, and firmware issues
  17. Review Mode - Simulated radio and reviewer instructions for Google Play and App Store review
  18. Network Map - Online repeater map, adding and managing repeaters from it, opt-in uploads, and hiding a repeater
  19. Themes - Color themes, custom icons and map markers, chat backgrounds, automatic holiday themes, and holiday message animations
  20. Message Filter - Hide spam and repeated channel messages with your own rules, automatic checks, and learning from Spam taps, all on the device

App Overview

MeshCore Open connects to MeshCore LoRa mesh radios over BLE, USB, or TCP. Once connected, users can:

  • Chat with other mesh nodes via encrypted direct messages
  • Broadcast on shared channels (public, hashtag, private, or community-scoped)
  • View nodes on a map with GPS locations, predicted positions, and path traces
  • Manage repeaters with CLI access, telemetry, neighbor info, and settings
  • Share contacts via meshcore:// URIs and QR codes
  • Share locations as map pins from chat or the map
  • Scan for nearby nodes and import/export discovered contacts
  • Configure radio settings including frequency, power, bandwidth, and spreading factor
  • Cache offline maps for use without internet connectivity
  • Analyze line-of-sight between nodes with terrain elevation profiles
  • Filter spam in channels with your own rules and automatic on-device checks
  • Use Android Auto to hear new messages and reply by voice while driving (Android)

What needs internet?

Feature Internet requirement
Radio messaging, region-scoped sends No internet needed for the mesh transport
Mesh image encoding/reconstruction Local after model installation
On-device translation Local after model installation
Model downloads Internet required
GIF search/display, URL image previews, and IPFS image/file uploads Internet required to upload or retrieve content
Map display Cached tiles work offline; uncached tiles need internet
Online network map and opt-in uploads Internet required
Terrain LOS analysis Elevation lookup needs internet unless the required data is already cached

Keeping documentation current

When changing a feature, update its access steps, defaults, platform/firmware requirements, failure states, and screenshots. Keep binary framing details in the protocol reference and implementation links. See contribution guidelines.