Files
meshcore-open/lib/l10n/app_en.arb
T

3754 lines
150 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"@@locale": "en",
"appTitle": "MeshCore Open",
"nav_contacts": "Contacts",
"nav_channels": "Channels",
"nav_map": "Map",
"common_cancel": "Cancel",
"common_ok": "OK",
"common_connect": "Connect",
"common_unknownDevice": "Unknown Device",
"common_save": "Save",
"common_delete": "Delete",
"common_deleteAll": "Delete All",
"common_close": "Close",
"common_done": "Done",
"common_edit": "Edit",
"common_add": "Add",
"common_settings": "Settings",
"common_disconnect": "Disconnect",
"common_connected": "Connected",
"common_disconnected": "Disconnected",
"common_create": "Create",
"common_continue": "Continue",
"common_share": "Share",
"common_copy": "Copy",
"common_retry": "Retry",
"common_hide": "Hide",
"common_remove": "Remove",
"common_enable": "Enable",
"common_disable": "Disable",
"common_undo": "Undo",
"messageStatus_sent": "Sent",
"messageStatus_delivered": "Delivered. The contact confirmed they got it.",
"messageStatus_pending": "Sending",
"messageStatus_failed": "Failed to send",
"messageStatus_repeated": "Heard repeated",
"messageStatus_failedChannel": "Your radio couldn't send this message.",
"messageStatus_resending": "Not heard through enough repeaters yet. Resent {resends} of {maxResends} times.",
"@messageStatus_resending": {
"placeholders": {
"resends": {
"type": "int"
},
"maxResends": {
"type": "int"
}
}
},
"messageStatus_hopsNotReached": "Sent, but only heard back through {hops} of {required} repeaters. It may still have gone further than your radio can hear.",
"@messageStatus_hopsNotReached": {
"placeholders": {
"hops": {
"type": "int"
},
"required": {
"type": "int"
}
}
},
"messageStatus_sentChannel": "Sent. Channels don't confirm delivery, so this only means your radio sent it.",
"messageStatus_sentDirect": "Sent. Waiting for the contact to confirm.",
"messageStatus_heardRepeatedCount": "Heard repeated {count, plural, =1{once} other{{count} times}}. Nearby repeaters passed it on.",
"@messageStatus_heardRepeatedCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"urlImage_enable": "Enable URL images",
"urlImage_possible": "Possible URL image; enable it in Settings.",
"urlImage_disabledInAppSettings": "Turned off in app settings",
"common_reboot": "Reboot",
"common_loading": "Loading...",
"common_notAvailable": "—",
"common_voltageValue": "{volts} V",
"@common_voltageValue": {
"placeholders": {
"volts": {
"type": "String"
}
}
},
"common_percentValue": "{percent}%",
"@common_percentValue": {
"placeholders": {
"percent": {
"type": "int"
}
}
},
"common_autoRefresh": "Autorefresh",
"common_interval": "Interval",
"scanner_title": "MeshCore Open",
"connectionChoiceUsbLabel": "USB",
"connectionChoiceBluetoothLabel": "Bluetooth",
"connectionChoiceTcpLabel": "TCP",
"tcpScreenTitle": "Connect over TCP",
"tcpHostLabel": "Endpoint",
"tcpHostHint": "192.168.40.10 / example.com",
"tcpPortLabel": "Port",
"tcpPortHint": "5000",
"tcpStatus_notConnected": "Enter endpoint and connect",
"tcpStatus_connectingTo": "Connecting to {endpoint}...",
"@tcpStatus_connectingTo": {
"placeholders": {
"endpoint": {
"type": "String"
}
}
},
"tcpErrorHostRequired": "Host is required.",
"tcpErrorPortInvalid": "Port must be between 1 and 65535.",
"tcpErrorUnsupported": "TCP transport is not supported on this platform.",
"tcpErrorTimedOut": "TCP connection timed out.",
"tcpConnectionFailed": "TCP connection failed: {error}",
"@tcpConnectionFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"usbScreenTitle": "Connect over USB",
"usbScreenSubtitle": "Choose a detected serial device and connect directly to your MeshCore node.",
"usbScreenStatus": "Select a USB device",
"usbScreenNote": "USB serial is active on supported Android devices and desktop platforms.",
"usbScreenEmptyState": "No USB devices found. Plug one in and refresh.",
"usbErrorPermissionDenied": "USB permission was denied.",
"usbErrorDeviceMissing": "The selected USB device is no longer available.",
"usbErrorInvalidPort": "Select a valid USB device.",
"usbErrorBusy": "Another USB connection request is already in progress.",
"usbErrorNotConnected": "No USB device is connected.",
"usbErrorOpenFailed": "Failed to open the selected USB device.",
"usbErrorConnectFailed": "Failed to connect to the selected USB device.",
"usbErrorUnsupported": "USB serial is not supported on this platform.",
"usbErrorAlreadyActive": "A USB connection is already active.",
"usbErrorNoDeviceSelected": "No USB device was selected.",
"usbErrorPortClosed": "The USB connection is not open.",
"usbErrorConnectTimedOut": "Connection timed out. Make sure the device has USB Companion firmware.",
"usbFallbackDeviceName": "Web Serial Device",
"usbStatus_notConnected": "Select a USB device",
"usbStatus_connecting": "Connecting to USB device...",
"usbStatus_searching": "Searching for USB devices...",
"usbConnectionFailed": "USB connection failed: {error}",
"@usbConnectionFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"scanner_scanning": "Scanning for devices...",
"scanner_connecting": "Connecting...",
"scanner_disconnecting": "Disconnecting...",
"scanner_notConnected": "Not connected",
"scanner_connectedTo": "Connected to {deviceName}",
"@scanner_connectedTo": {
"placeholders": {
"deviceName": {
"type": "String"
}
}
},
"scanner_searchingDevices": "Searching for MeshCore devices...",
"scanner_tapToScan": "Tap Scan to find MeshCore devices",
"scanner_connectionFailed": "Connection failed: {error}",
"@scanner_connectionFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"scanner_stop": "Stop",
"scanner_scan": "Scan",
"scanner_bluetoothOff": "Bluetooth is off",
"scanner_bluetoothOffMessage": "Please turn on Bluetooth to scan for devices",
"scanner_chromeRequired": "Chrome Browser Required",
"scanner_chromeRequiredMessage": "This web application requires Google Chrome or a Chromium-based browser for Bluetooth support.",
"scanner_enableBluetooth": "Enable Bluetooth",
"scanner_getNodeTitle": "Need a new node?",
"scanner_getNodeBody": "Wallet-sized, runs MeshCore, dual-band GPS, waterproof, 5-day battery.",
"scanner_getNodeAction": "Get one here",
"scanner_getNodeDisclosure": "Affiliate link: each purchase supports MeshCore Open.",
"scanner_bluetoothWebUnsupported": "Bluetooth isn't available in the browser. Connect over USB instead.",
"device_quickSwitch": "Quick switch",
"device_meshcore": "MeshCore",
"settings_title": "Settings",
"settings_deviceInfo": "Device Info",
"settings_appSettings": "App Settings",
"settings_appSettingsSubtitle": "Notifications, messaging, and map preferences",
"settings_nodeSettings": "Node Settings",
"settings_nodeName": "Node Name",
"settings_nodeNameNotSet": "Not set",
"settings_nodeNameHint": "Enter node name",
"settings_nodeNameUpdated": "Name updated",
"settings_radioSettings": "Radio Settings",
"settings_radioSettingsSubtitle": "Frequency, power, spreading factor",
"settings_radioSettingsUpdated": "Radio settings updated",
"settings_radioSettingsNotApplied": "The radio did not apply these settings",
"settings_pathHashModeNotApplied": "Radio settings were applied, but the radio did not confirm the new path hash size",
"settings_regionSettings": "Regions",
"settings_regionSettingsSubtitle": "Limit channel floods to an area",
"settings_regionEmptyExplanation": "Regions limit flood messages to repeaters in an area. Fetch them from nearby repeaters or add one by name.",
"settings_regionFetchFromRepeaters": "Fetch from repeaters",
"settings_regionDefault": "Default region",
"settings_regionDefaultSubtitle": "Used by channels without their own region",
"settings_regionDefaultNone": "None",
"settings_regionUseRadioDefault": "Radio default ({region})",
"@settings_regionUseRadioDefault": {
"placeholders": {
"region": {
"type": "String"
}
}
},
"settings_regionNoRegion": "No region (unscoped)",
"settings_regionRadioDefault": "Radio default region",
"settings_regionRadioDefaultSubtitle": "Saved on the radio. Floods sent without a region use it, from this app and any other app connected to the radio.",
"settings_regionRadioDefaultUpdated": "Radio default region updated",
"settings_regionRadioDefaultFailed": "Could not update the radio default region",
"settings_regionManagement_screenTitle": "Region Management",
"settings_regionNameHint": "Enter region name",
"settings_regionAddRegion": "Add region",
"settings_regionFetchRegions": "Fetch regions from repeaters",
"settings_regionFetchRegionsFail": "No regions were found",
"settings_regionFetchRegionsAlreadyExists": "This region has already been added",
"settings_regionName": "Region Name",
"settings_regionDeleted": "Region deleted",
"settings_deleteRegion": "Delete Region",
"settings_deleteRegionConfirm": "Remove \"{region}\" from region list?",
"@settings_deleteRegionConfirm": {
"placeholders": {
"region": {
"type": "String"
}
}
},
"settings_location": "Location",
"settings_locationSubtitle": "GPS coordinates",
"settings_locationUpdated": "Location and GPS settings updated",
"settings_locationBothRequired": "Enter both latitude and longitude.",
"settings_locationInvalid": "Invalid latitude or longitude.",
"settings_locationGPSEnable": "GPS Enable",
"settings_locationGPSEnableSubtitle": "Enables GPS to automatically update location.",
"settings_locationIntervalSec": "Interval for GPS (Seconds)",
"settings_locationIntervalInvalid": "Interval must be at least 60 seconds, and less than 86400 seconds.",
"settings_latitude": "Latitude",
"settings_longitude": "Longitude",
"settings_contactSettings": "Contact Settings",
"settings_contactSettingsSubtitle": "Settings for how contacts are added.",
"settings_privacyMode": "Privacy Mode",
"settings_privacyModeSubtitle": "Hide name/location in advertisements",
"settings_privacyModeToggle": "Toggle privacy mode to hide your name and location in advertisements.",
"settings_privacyModeEnabled": "Privacy mode enabled",
"settings_privacyModeDisabled": "Privacy mode disabled",
"settings_privacy": "Privacy Settings",
"settings_privacySubtitle": "Control what information is shared.",
"settings_privacySettingsDescription": "Choose what information your device shares with others.",
"settings_denyAll": "Deny all",
"settings_allowByContact": "Only contacts I allow",
"settings_allowAll": "Allow all",
"settings_telemetryBaseMode": "Who can request battery and status",
"settings_telemetryLocationMode": "Who can request my location",
"settings_telemetryEnvironmentMode": "Who can request sensor data",
"settings_telemetryPerContactHint": "To allow a contact, open their chat and choose Contact Settings from the menu.",
"settings_advertLocation": "Advert Location",
"settings_advertLocationSubtitle": "Include location in advert.",
"settings_autoZeroHopAdvertOnGpsUpdate": "Auto Zero-Hop Advert On GPS Update",
"settings_autoZeroHopAdvertOnGpsUpdateSubtitle": "App setting: when your GPS position changes, automatically advertise your new location to nearby nodes only (requires Advert Location).",
"settings_multiAck": "Multi-ACKs",
"settings_multiAckSubtitle": "Send extra ACKs for better delivery; uses more airtime",
"settings_telemetryModeUpdated": "Telemetry mode updated",
"settings_actions": "Actions",
"settings_deleteAllPaths": "Delete All Paths",
"settings_deleteAllPathsSubtitle": "Clear all path data from contacts.",
"settings_sendAdvertisement": "Send Advertisement",
"settings_sendAdvertisementSubtitle": "Broadcast presence now",
"settings_advertisementSent": "Advertisement sent",
"settings_syncTime": "Sync Time",
"settings_syncTimeSubtitle": "Set device clock to phone time",
"settings_timeSynchronized": "Time synchronized",
"settings_refreshContacts": "Refresh Contacts",
"settings_refreshContactsSubtitle": "Reload contact list from device",
"settings_rebootDevice": "Reboot Device",
"settings_rebootDeviceSubtitle": "Restart the MeshCore device",
"settings_rebootDeviceConfirm": "Are you sure you want to reboot the device? You will be disconnected.",
"settings_debug": "Debug",
"settings_companionDebugLog": "Companion Debug Log",
"settings_companionDebugLogSubtitle": "BLE/TCP/USB commands, responses, and raw data",
"settings_appDebugLog": "App Debug Log",
"settings_appDebugLogSubtitle": "Application debug messages",
"settings_about": "About",
"settings_aboutVersion": "MeshCore Open v{version}",
"@settings_aboutVersion": {
"placeholders": {
"version": {
"type": "String"
}
}
},
"settings_aboutLegalese": "2026 MeshCore Open Source Project",
"settings_aboutDescription": "An open-source Flutter client for MeshCore LoRa mesh networking devices.",
"settings_aboutOpenMeteoAttribution": "LOS elevation data: Open-Meteo (CC BY 4.0)",
"settings_infoName": "Name",
"settings_infoId": "ID",
"settings_infoStatus": "Status",
"settings_infoBattery": "Battery",
"settings_infoPublicKey": "Public Key",
"settings_publicKeyCopied": "Public key copied",
"settings_infoContactsCount": "Contacts Count",
"settings_infoChannelCount": "Channel Count",
"settings_infoHardware": "Hardware",
"settings_infoFirmware": "Firmware",
"settings_presets": "Presets",
"settings_presetCustom": "Custom",
"settings_radioMatchWarning": "All nodes you talk to must use the same frequency, bandwidth and SF. The coding rate (CR) can differ.",
"settings_frequency": "Frequency (MHz)",
"settings_frequencyHelper": "150.0 - 2500.0",
"settings_frequencyInvalid": "Invalid frequency (150-2500 MHz)",
"settings_bandwidth": "Bandwidth",
"settings_spreadingFactor": "Spreading Factor",
"settings_codingRate": "Coding Rate",
"settings_txPower": "TX Power (dBm)",
"settings_txPowerRangeHelper": "{min} to {max} dBm",
"@settings_txPowerRangeHelper": {
"placeholders": {
"min": {
"type": "int"
},
"max": {
"type": "int"
}
}
},
"settings_txPowerInvalid": "Invalid TX power",
"settings_clientRepeat": "Off-Grid Repeat",
"settings_clientRepeatFrequencyNote": "Frequency set to {freq} MHz for off-grid repeat",
"@settings_clientRepeatFrequencyNote": {
"placeholders": {
"freq": {
"type": "String"
}
}
},
"settings_clientRepeatSubtitle": "Allow this device to repeat mesh packets for others",
"settings_clientRepeatFreqWarning": "Off-grid repeat requires 433, 869.495, or 918 MHz frequency",
"settings_error": "Error: {message}",
"@settings_error": {
"placeholders": {
"message": {
"type": "String"
}
}
},
"appSettings_title": "App Settings",
"appSettings_appearance": "Appearance",
"appSettings_theme": "Theme",
"appSettings_themeSystem": "System default",
"appSettings_themeLight": "Light",
"appSettings_themeDark": "Dark",
"appSettings_colorTheme": "Color theme",
"appSettings_holidayAnimations": "Holiday message animations",
"appSettings_holidayAnimationsSubtitle": "Bats, a turkey, Santa or fireworks when someone sends a holiday greeting",
"themes_title": "Themes",
"themes_default": "MeshCore",
"themes_defaultSubtitle": "Standard colors, follows the Light / Dark setting",
"themes_builtIn": "Built-in",
"themes_holidays": "Holidays",
"themes_holidayAutoSwitch": "Switch automatically",
"themes_holidayAutoSwitchSubtitle": "Uses each holiday's theme from 17 days before until the day itself",
"themes_holidayAutoApplied": "{holiday} theme is on automatically. Your own theme comes back after the holiday.",
"@themes_holidayAutoApplied": {
"placeholders": {
"holiday": {
"type": "String"
}
}
},
"themes_holidayAutoAppliedTag": "On automatically",
"themes_myThemes": "My themes",
"themes_myThemesEmpty": "Make your own theme by picking a background and an accent color.",
"themes_create": "Create theme",
"themes_import": "Import theme",
"themes_importHint": "Paste a theme code",
"themes_importInvalid": "That is not a valid theme code",
"themes_imported": "Added theme \"{name}\"",
"@themes_imported": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"themes_customize": "Customize a copy",
"themes_copyCode": "Copy theme code",
"themes_codeCopied": "Theme code copied",
"themes_deleteConfirm": "Delete theme \"{name}\"?",
"@themes_deleteConfirm": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"themes_copyName": "{name} copy",
"@themes_copyName": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"themes_newTitle": "New theme",
"themes_editTitle": "Edit theme",
"themes_name": "Name",
"themes_nameRequired": "Give your theme a name",
"themes_background": "Background",
"themes_backgroundHelp": "A dark background makes a dark theme",
"themes_accent": "Accent",
"themes_accentHelp": "Buttons, highlights and your chat bubbles",
"themes_hexColor": "Hex color",
"themes_preview": "Preview",
"themes_previewIncoming": "Anyone on the mesh tonight?",
"themes_previewOutgoing": "Loud and clear!",
"themes_previewSwitch": "Notifications",
"themes_lowContrast": "The accent is hard to see on this background",
"themes_saveAndUse": "Save and use",
"themes_icons": "Icons",
"themes_iconsHelp": "Tap an icon to swap it for another icon or your own picture",
"themes_iconChanged": "Changed",
"themes_iconSend": "Send button",
"themes_iconRepeater": "Repeaters",
"themes_iconRoom": "Rooms",
"themes_iconSensor": "Sensors",
"themes_mapMarkers": "Map markers",
"themes_mapMarkersHelp": "Swap the markers for nodes and for you on the map",
"themes_iconUsePicture": "Use a picture",
"themes_iconReset": "Use the default icon",
"themes_iconPictureFailed": "Could not use that picture",
"themes_exportFile": "Export to file",
"themes_exportAll": "Export my themes",
"themes_importFile": "Import from file",
"themes_pasteCode": "Paste theme code",
"themes_exportFailed": "Could not export themes",
"themes_importFileResult": "Imported {count} themes",
"@themes_importFileResult": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"themes_importFileNone": "No themes found in that file",
"chatBackground_title": "Chat background",
"chatBackground_thisChatOnly": "Only for this chat",
"chatBackground_themeOverrides": "Your theme \"{name}\" sets the background in every chat. Turn that off in the theme to use this one.",
"@chatBackground_themeOverrides": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"chatBackground_none": "None",
"chatBackground_picture": "Picture",
"chatBackground_choosePicture": "Choose a picture",
"chatBackground_pictureFailed": "Could not use that picture",
"chatBackground_fade": "Fade",
"themes_chatBackground": "Chat background",
"themes_chatBackgroundHelp": "Shown in chats that do not have their own background",
"themes_chatBackgroundEverywhere": "Use in every chat",
"themes_chatBackgroundEverywhereHelp": "Also replaces backgrounds set on individual chats",
"appSettings_language": "Language",
"appSettings_languageSystem": "System default",
"appSettings_languageEn": "English",
"appSettings_languageFr": "Français",
"appSettings_languageEs": "Español",
"appSettings_languageDe": "Deutsch",
"appSettings_languagePl": "Polski",
"appSettings_languageSl": "Slovenščina",
"appSettings_languagePt": "Português",
"appSettings_languageIt": "Italiano",
"appSettings_languageZh": "中文",
"appSettings_languageSv": "Svenska",
"appSettings_languageNl": "Nederlands",
"appSettings_languageSk": "Slovenčina",
"appSettings_languageBg": "Български",
"appSettings_languageRu": "Русский",
"appSettings_languageUk": "Українська",
"repeater_pathHashModeOption0": "1 byte",
"repeater_pathHashModeOption1": "2 bytes",
"repeater_pathHashModeOption2": "3 bytes",
"repeater_pathHashModeOption3": "4 bytes",
"settings_pathHashModeHelper": "Size of each node ID recorded in the path of flood packets this radio sends: 1 byte (256 IDs, up to 64 hops), 2 bytes (65K IDs, up to 32 hops), 3 bytes (16M IDs, up to 21 hops). Larger IDs reduce collisions, but repeaters on firmware older than v1.14 drop packets with 2- or 3-byte IDs.",
"settings_requiresFirmware": "Requires firmware {version} or newer",
"@settings_requiresFirmware": {
"placeholders": {
"version": {
"type": "String"
}
}
},
"appSettings_channelMinHops": "Resend channel messages until they travel far enough",
"appSettings_channelMinHopsSubtitle": "If your message isn't heard coming back through enough repeaters, send it again. Uses more airtime.",
"appSettings_channelMinHopsCount": "Required hops: {count}",
"@appSettings_channelMinHopsCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"appSettings_channelMinHopsRetries": "Resend up to {count, plural, =1{1 time} other{{count} times}}",
"@appSettings_channelMinHopsRetries": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"appSettings_channelMinHopsCountRepeaters": "Also count different nearby repeaters",
"appSettings_channelMinHopsCountRepeatersSubtitle": "Treat the message as sent when {count, plural, =1{1 nearby repeater} other{{count} different nearby repeaters}} repeat it, even if you can't hear it travel further.",
"@appSettings_channelMinHopsCountRepeatersSubtitle": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"appSettings_enableMessageTracing": "Show full repeater path in messages",
"appSettings_enableMessageTracingSubtitle": "Also show repeat counts and trip times. Long-press a message and choose Path for full details.",
"appSettings_regionOnHopsLine": "Region next to hop count",
"appSettings_regionOnHopsLineSubtitle": "Show a channel message's region on the same line as its hop count instead of below it.",
"appSettings_notifications": "Notifications",
"appSettings_enableNotifications": "Enable Notifications",
"appSettings_enableNotificationsSubtitle": "Receive notifications for messages and adverts",
"appSettings_notificationPermissionDenied": "Notification permission denied",
"appSettings_notificationsEnabled": "Notifications enabled",
"appSettings_notificationsDisabled": "Notifications disabled",
"appSettings_messageNotifications": "Message Notifications",
"appSettings_messageNotificationsSubtitle": "Show notification when receiving new messages",
"appSettings_batteryOptimization": "Background Activity",
"appSettings_batteryOptimizationSubtitle": "Set MeshCore Open to \"Don't optimize\" in battery settings so messages keep arriving in the background",
"appSettings_channelMessageNotifications": "Channel Message Notifications",
"appSettings_channelMessageNotificationsSubtitle": "Show notification when receiving channel messages",
"appSettings_advertisementNotifications": "Advertisement Notifications",
"appSettings_advertisementNotificationsSubtitle": "Show notification when new nodes are discovered",
"appSettings_messaging": "Messaging",
"appSettings_clearPathOnMaxRetry": "Clear Path on Max Retry",
"appSettings_clearPathOnMaxRetrySubtitle": "Reset contact path after 5 failed send attempts",
"appSettings_pathsWillBeCleared": "Paths will be cleared after 5 failed retries",
"appSettings_pathsWillNotBeCleared": "Paths will not be auto-cleared",
"appSettings_autoRouteRotation": "Auto Route Rotation",
"appSettings_autoRouteRotationSubtitle": "Cycle between best paths and flood mode",
"appSettings_autoRouteRotationEnabled": "Auto route rotation enabled",
"appSettings_autoRouteRotationDisabled": "Auto route rotation disabled",
"appSettings_maxRouteWeight": "Max Route Weight",
"appSettings_maxRouteWeightSubtitle": "Maximum weight a path can accumulate from successful deliveries",
"appSettings_initialRouteWeight": "Initial Route Weight",
"appSettings_initialRouteWeightSubtitle": "Starting weight for newly discovered paths",
"appSettings_routeWeightSuccessIncrement": "Success Weight Increment",
"appSettings_routeWeightSuccessIncrementSubtitle": "Weight added to a path after successful delivery",
"appSettings_routeWeightFailureDecrement": "Failure Weight Decrement",
"appSettings_routeWeightFailureDecrementSubtitle": "Weight removed from a path after failed delivery",
"appSettings_maxMessageRetries": "Max Message Retries",
"appSettings_maxMessageRetriesSubtitle": "Number of retry attempts before marking a message as failed",
"appSettings_ipfsImageLinks": "IPFS provider configuration",
"appSettings_ipfsImageLinksSubtitle": "Upload for url Images (or Files) via IPFS provider and default gateway to receive",
"appSettings_loadLinkImages": "Load images from links",
"appSettings_loadLinkImagesSubtitle": "Show pictures from links in messages. Loading an image shares your IP address with the site that hosts it.",
"appSettings_showLinkImagesByDefault": "Show link images in all chats by default",
"appSettings_showLinkImagesByDefaultSubtitle": "Load link images in every chat unless you turned them off there. This shares your IP address with image hosts in every chat.",
"appSettings_publicIpfsGateway": "Public gateway",
"appSettings_ipfsGatewayDeactivated": "Deactivated",
"appSettings_ipfsGatewayCustom": "Custom (Kubo)",
"appSettings_uploadIpfsProvider": "Upload provider",
"appSettings_uploadIpfsGateway": "Upload gateway",
"appSettings_uploadIpfsGatewaySubtitle": "Gateway to share Image or File as url-link. Leave empty to use ipfs: format, which may not be opened by other clients.",
"appSettings_uploadIpfsEndpoint": "Upload endpoint",
"appSettings_uploadIpfsEndpointSubtitle": "The API endpoint used to upload files",
"appSettings_uploadIpfsApiKey": "Upload API key",
"appSettings_ipfsImageLinksDescription": "Public gateway downloads ipfs: format images. Upload gateway is used to generate share links for uploaded url images or files.",
"appSettings_battery": "Battery",
"appSettings_batteryChemistry": "Battery Chemistry",
"appSettings_batteryChemistryPerDevice": "Set per device ({deviceName})",
"@appSettings_batteryChemistryPerDevice": {
"placeholders": {
"deviceName": {
"type": "String"
}
}
},
"appSettings_batteryChemistryConnectFirst": "Connect to a device to choose",
"appSettings_batteryNmc": "18650 NMC (3.0-4.2V)",
"appSettings_batteryLifepo4": "LiFePO4 (2.6-3.65V)",
"appSettings_batteryLipo": "LiPo (3.0-4.2V)",
"appSettings_batteryLipoHv": "LiPo HV (3.0-4.35V)",
"appSettings_mapDisplay": "Map Display",
"appSettings_showRepeaters": "Show Repeaters",
"appSettings_showRepeatersSubtitle": "Display repeater nodes on the map",
"appSettings_showChatNodes": "Show Chat Nodes",
"appSettings_showChatNodesSubtitle": "Display chat nodes on the map",
"appSettings_showOtherNodes": "Show Other Nodes",
"appSettings_showOtherNodesSubtitle": "Display other node types on the map",
"appSettings_timeFilter": "Time Filter",
"appSettings_timeFilterShowAll": "Show all nodes",
"appSettings_timeFilterShowLast": "Show nodes from last {hours} hours",
"@appSettings_timeFilterShowLast": {
"placeholders": {
"hours": {
"type": "int"
}
}
},
"appSettings_mapTimeFilter": "Map Time Filter",
"appSettings_showNodesDiscoveredWithin": "Show nodes discovered within:",
"appSettings_allTime": "All time",
"appSettings_lastHour": "Last hour",
"appSettings_last6Hours": "Last 6 hours",
"appSettings_last24Hours": "Last 24 hours",
"appSettings_lastWeek": "Last week",
"appSettings_rasterTileSource": "Raster Tile Source",
"appSettings_stadiaEndpoint": "Stadia Endpoint",
"appSettings_stadiaApiKey": "Stadia API Key",
"appSettings_stadiaApiKeyRequired": "Required for Stadia Maps usage",
"appSettings_stadiaApiKeyConfigured": "Configured: {maskedKey}",
"@appSettings_stadiaApiKeyConfigured": {
"placeholders": {
"maskedKey": {
"type": "String"
}
}
},
"appSettings_stadiaApiKeyDialogDescription": "Enter your Stadia Maps API key. This app uses it for raster tile requests.",
"appSettings_offlineMapCache": "Offline Map Cache",
"appSettings_unitsTitle": "Units",
"appSettings_unitsMetric": "Metric (m / km)",
"appSettings_unitsImperial": "Imperial (ft / mi)",
"appSettings_noAreaSelected": "No area selected",
"appSettings_areaSelectedZoom": "Area selected (zoom {minZoom}-{maxZoom})",
"@appSettings_areaSelectedZoom": {
"placeholders": {
"minZoom": {
"type": "int"
},
"maxZoom": {
"type": "int"
}
}
},
"appSettings_debugCard": "Debug",
"appSettings_appDebugLogging": "App Debug Logging",
"appSettings_appDebugLoggingSubtitle": "Log app debug messages for troubleshooting",
"appSettings_appDebugLoggingEnabled": "App debug logging enabled",
"appSettings_appDebugLoggingDisabled": "App debug logging disabled",
"contacts_title": "Contacts",
"contacts_noContacts": "No contacts yet",
"contacts_contactsWillAppear": "Contacts will appear when devices advertise",
"contacts_unread": "Unread",
"contacts_searchContactsNoNumber": "Search Contacts...",
"contacts_searchContacts": "Search {number}{str} Contacts...",
"@contacts_searchContacts": {
"placeholders": {
"number": {
"type": "int"
},
"str": {
"type": "String"
}
}
},
"contacts_searchFavorites": "Search {number}{str} Favorites...",
"@contacts_searchFavorites": {
"placeholders": {
"number": {
"type": "int"
},
"str": {
"type": "String"
}
}
},
"contacts_searchUsers": "Search {number}{str} Users...",
"@contacts_searchUsers": {
"placeholders": {
"number": {
"type": "int"
},
"str": {
"type": "String"
}
}
},
"contacts_searchRepeaters": "Search {number}{str} Repeaters...",
"@contacts_searchRepeaters": {
"placeholders": {
"number": {
"type": "int"
},
"str": {
"type": "String"
}
}
},
"contacts_searchRoomServers": "Search {number}{str} Room servers...",
"@contacts_searchRoomServers": {
"placeholders": {
"number": {
"type": "int"
},
"str": {
"type": "String"
}
}
},
"contacts_noUnreadContacts": "No unread contacts",
"contacts_noContactsFound": "No contacts or groups found",
"contacts_storageFull": "Contact storage on the node is full. New nodes cannot be added until contacts are removed.",
"contacts_deleteContact": "Delete Contact",
"contacts_removeConfirm": "Remove {contactName} from contacts?",
"@contacts_removeConfirm": {
"placeholders": {
"contactName": {
"type": "String"
}
}
},
"contacts_removeFromContacts": "Remove from contacts",
"contacts_removeFromContactsConfirm": "{contactName} will move to Discovered contacts. Chat history will be deleted.",
"@contacts_removeFromContactsConfirm": {
"placeholders": {
"contactName": {
"type": "String"
}
}
},
"contacts_keepChatHistory": "Keep chat history",
"contacts_remove": "Remove",
"contacts_removeAutoAddNote": "Your radio auto-adds this contact type, so it will come back the next time it advertises. Turn off auto-add in Contacts settings to keep it removed.",
"contacts_removeFailed": "The radio did not confirm the removal. The contact was not removed.",
"contacts_discoveredNearby": "Discovered nearby ({count})",
"@contacts_discoveredNearby": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"contacts_noContactsDiscoveredHint": "Nodes your radio hears but hasn't added yet are listed in Discovered contacts",
"contacts_manageRepeater": "Manage Repeater",
"contacts_manageRoom": "Manage Room Server",
"contacts_roomLogin": "Room Server Login",
"contacts_openChat": "Open Chat",
"contacts_editGroup": "Edit Group",
"contacts_deleteGroup": "Delete Group",
"contacts_deleteGroupConfirm": "Remove \"{groupName}\"?",
"@contacts_deleteGroupConfirm": {
"placeholders": {
"groupName": {
"type": "String"
}
}
},
"contacts_newGroup": "New Group",
"contacts_moreOptions": "More options",
"contacts_searchOpen": "Search contacts",
"contacts_searchClose": "Close search",
"contacts_groupName": "Group name",
"contacts_groupNameRequired": "Group name is required",
"contacts_groupNameReserved": "This group name is reserved",
"contacts_groupAlreadyExists": "Group \"{name}\" already exists",
"@contacts_groupAlreadyExists": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"contacts_filterContacts": "Filter contacts...",
"contacts_noContactsMatchFilter": "No contacts match your filter",
"contacts_noMembers": "No members",
"contacts_lastSeenNow": "recently",
"contacts_lastSeenMinsAgo": "~ {minutes} min.",
"@contacts_lastSeenMinsAgo": {
"placeholders": {
"minutes": {
"type": "int"
}
}
},
"contacts_lastSeenHourAgo": "~ 1 hour",
"contacts_lastSeenHoursAgo": "~ {hours} hours",
"@contacts_lastSeenHoursAgo": {
"placeholders": {
"hours": {
"type": "int"
}
}
},
"contacts_lastSeenDayAgo": "~ 1 day",
"contacts_lastSeenDaysAgo": "~ {days} days",
"@contacts_lastSeenDaysAgo": {
"placeholders": {
"days": {
"type": "int"
}
}
},
"contact_info": "Contact Info",
"contact_settings": "Contact Settings",
"contact_telemetry": "Telemetry",
"contact_lastSeen": "Last seen",
"contact_clearChat": "Clear Chat",
"contact_teleBase": "Telemetry Base",
"contact_teleBaseSubtitle": "Allow sharing battery level and basic telemetry",
"contact_teleLoc": "Telemetry Location",
"contact_teleLocSubtitle": "Allow sharing location data",
"contact_teleEnv": "Telemetry Environment",
"contact_teleEnvSubtitle": "Allow sharing environment sensor data",
"channels_title": "Channels",
"channels_noChannelsConfigured": "No channels configured",
"channels_addPublicChannel": "Add Public Channel",
"channels_searchChannels": "Search channels...",
"channels_noChannelsFound": "No channels found",
"channels_channelIndex": "Channel {index}",
"@channels_channelIndex": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"channels_public": "Public",
"channels_via": "via {path}",
"@channels_via": {
"placeholders": {
"path": {
"type": "String"
}
}
},
"channels_private": "Private",
"channels_hashtag": "Hashtag",
"channels_addSectionJoin": "Join existing",
"channels_addSectionCreate": "Create new",
"channels_dragToReorder": "Drag to reorder",
"channels_editChannel": "Edit channel",
"channels_notificationSettings": "Notification settings",
"channels_notifyAll": "All messages",
"channels_notifyMentionsOnly": "Mentions only",
"channels_notifyNone": "Muted",
"channels_notificationModeTooltip": "Notifications: {mode}",
"@channels_notificationModeTooltip": {
"placeholders": {
"mode": {
"type": "String"
}
}
},
"channels_muteChannel": "Mute channel",
"channels_unmuteChannel": "Unmute channel",
"channels_deleteChannel": "Delete channel",
"channels_deleteChannelConfirm": "Delete \"{name}\"? This cannot be undone.",
"@channels_deleteChannelConfirm": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_channelDeleteFailed": "Failed to delete channel \"{name}\"",
"@channels_channelDeleteFailed": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_channelDeleted": "Channel \"{name}\" deleted",
"@channels_channelDeleted": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_addChannel": "Add Channel",
"channels_channelIndexLabel": "Channel Index",
"channels_channelName": "Channel Name",
"channels_usePublicChannel": "Use Public Channel",
"channels_standardPublicPsk": "Standard public PSK",
"channels_pskHex": "PSK (Hex)",
"channels_generateRandomPsk": "Generate random PSK",
"channels_enterChannelName": "Please enter a channel name",
"channels_pskMustBe32Hex": "PSK must be 32 hex characters",
"channels_channelAdded": "Channel \"{name}\" added",
"@channels_channelAdded": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_editChannelTitle": "Edit Channel {index}",
"@channels_editChannelTitle": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"channels_smazCompression": "SMAZ compression",
"channels_cyr2latCompression": "Cyr2Lat compression",
"channels_cyr2latCompressionDscr": "Replaces some Cyrillic characters with Latin characters when sending.",
"channels_cyr2latSettingsHeading": "Cyr2Lat Setup",
"channels_cyr2latSettingsSubheading": "List of replacements",
"channels_cyr2latSettingsDscr": "Edit the JSON configuration of character replacement",
"channels_cyr2latSettingsDialogHint": "JSON replacement map",
"channels_cyr2latSettingsDialogWrongJSON": "Invalid JSON: {error}",
"@channels_cyr2latSettingsDialogWrongJSON": {
"placeholders": {
"error": {}
}
},
"channels_channelUpdated": "Channel \"{name}\" updated",
"@channels_channelUpdated": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"settings_cyr2latProfileAdd": "Add Cyr2Lat Profile",
"settings_cyr2latProfileName": "Profile Name",
"settings_cyr2latProfileNameEmpty": "Profile name cannot be empty",
"settings_cyr2latProfileAdded": "Profile added successfully",
"settings_cyr2latProfileUpdated": "Profile updated successfully",
"settings_cyr2latProfileEdit": "Edit Cyr2Lat Profile",
"settings_cyr2latProfileDelete": "Delete Cyr2Lat Profile",
"settings_cyr2latProfileDeleted": "Profile deleted successfully",
"settings_cyr2latProfileDeleteDscr": "Are you sure you want to delete the profile \"{name}\"?",
"@settings_cyr2latProfileDeleteDscr": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_publicChannelAdded": "Public channel added",
"channels_noFreeSlots": "All channel slots are in use",
"channels_sortBy": "Sort by",
"channels_sortManual": "Manual",
"channels_sortAZ": "A-Z",
"channels_sortLatestMessages": "Latest messages",
"channels_sortUnread": "Unread",
"channels_createPrivateChannel": "Create a Private Channel",
"channels_createPrivateChannelDesc": "Secured with a secret key.",
"channels_joinPrivateChannel": "Join a Private Channel",
"channels_joinPrivateChannelDesc": "Manually enter a secret key.",
"channels_joinPublicChannel": "Join the Public Channel",
"channels_joinPublicChannelDesc": "Anyone can join this channel.",
"channels_joinHashtagChannel": "Join a Hashtag Channel",
"channels_joinHashtagChannelDesc": "Anyone can join hashtag channels.",
"channels_scanQrCode": "Scan a QR Code",
"channels_scanQrCodeComingSoon": "Coming soon",
"channels_scanQrCodeDesc": "Join a channel or community from its QR code.",
"channels_scanQrInstructions": "Point the camera at a channel or community QR code",
"channels_invalidQrCode": "Not a MeshCore channel or community QR code",
"channels_joinChannelTitle": "Join Channel",
"channels_joinChannelConfirm": "Add \"{name}\" to your radio?",
"@channels_joinChannelConfirm": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_alreadyOnRadio": "\"{name}\" is already on your radio",
"@channels_alreadyOnRadio": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"channels_enterHashtag": "Enter hashtag",
"channels_hashtagHint": "e.g. #team",
"channels_regionSetTo": "Region: {region}",
"@channels_regionSetTo": {
"placeholders": {
"region": {
"type": "String",
"example": "de-mitte"
}
}
},
"channels_regionNotSet": "Region: none",
"channels_regionSelect_Title": "Select a region",
"channels_clearRegion": "Clear region",
"channels_regionDefaultSuffix": "(default)",
"channels_regionRadioDefaultSuffix": "(radio default)",
"channels_regionRadioDefaultApplies": "This radio sends floods without a region in its default region: {region}.",
"@channels_regionRadioDefaultApplies": {
"placeholders": {
"region": {
"type": "String"
}
}
},
"channels_regionSelectExplanation": "Flood messages on this channel will only be forwarded by repeaters in the selected region.",
"channels_regionEmpty": "No regions yet.",
"channels_manageRegions": "Manage regions",
"chat_noMessages": "No messages yet",
"chat_sendMessage": "Send message",
"chat_sendMessageTo": "Send a message to {contactName}",
"@chat_sendMessageTo": {
"placeholders": {
"contactName": {
"type": "String"
}
}
},
"chat_sendMessageToStart": "Send a message to get started",
"chat_originalMessageNotFound": "Original message not found",
"chat_replyingTo": "Replying to {name}",
"@chat_replyingTo": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"chat_replyTo": "Reply to {name}",
"@chat_replyTo": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"chat_location": "Location",
"chat_typeMessage": "Type a message...",
"chat_futureTimestampWarning": "This message's time is in the future, so the sender's clock may be wrong. It is shown in the order it arrived.",
"chat_messageTooLong": "Message too long (max {maxBytes} bytes).",
"@chat_messageTooLong": {
"placeholders": {
"maxBytes": {
"type": "int"
}
}
},
"chat_messageCopied": "Message copied",
"chat_messageDeleted": "Message deleted",
"chat_retryingMessage": "Retrying message",
"chat_retryCount": "Retry {current}/{max}",
"@chat_retryCount": {
"placeholders": {
"current": {
"type": "int"
},
"max": {
"type": "int"
}
}
},
"chat_selectSendAction": "Select send action",
"chat_sendGif": "Send GIF",
"chat_shareMyLocation": "Share my location",
"@chat_shareMyLocation": {
"description": "Chat input menu action that shares the radio's own position as a map marker"
},
"chat_noRadioLocation": "Your radio has no location set",
"@chat_noRadioLocation": {
"description": "Shown when sharing a location but the radio reports no usable position"
},
"chat_removeGif": "Remove GIF",
"chat_cancelReply": "Cancel reply",
"chat_sendImageLora": "Send low-res image over radio",
"chat_sendImageIpfs": "Send image or file via IPFS",
"chat_ipfsUploadFailed": "IPFS upload failed: {error}",
"@chat_ipfsUploadFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"chat_ipfsUploadNotConfigured": "Configure an IPFS upload provider in App Settings first.",
"chat_ipfsSelectedFileEmpty": "The selected file is empty.",
"chat_ipfsEndpointInvalid": "The IPFS upload endpoint must be a full http:// or https:// address. Check it in App Settings.",
"chat_ipfsPinataTokenMissing": "Pinata needs an API key or JWT. Add it in App Settings.",
"chat_ipfsFilebaseTokenMissing": "Filebase needs an API token. Add it in App Settings.",
"chat_ipfsKuboPathInvalid": "The Kubo upload endpoint must end with /api/v0/add. Check it in App Settings.",
"chat_ipfsLinkNoRoom": "Not enough room for the image link. Shorten your message, then try again.",
"@chat_ipfsLinkNoRoom": {
"description": "Shown before an IPFS upload when the link would push the draft over the message size limit"
},
"chat_ipfsLinkOverLimit": "Image link added, but the message is now too long. Shorten it before sending.",
"@chat_ipfsLinkOverLimit": {
"description": "Shown after an IPFS upload when the link plus the draft no longer fits the message size limit"
},
"chat_imagePickFailed": "Couldn't open that image",
"@chat_imagePickFailed": {
"description": "Shown when picking or reading a photo to send fails"
},
"chat_receivedGif": "Received a GIF",
"chat_reply": "Reply",
"chat_addReaction": "Add Reaction",
"chat_me": "Me",
"reaction_report": "Emoji Reactions",
"emojiCategorySmileys": "Smileys",
"emojiCategoryGestures": "Gestures",
"emojiCategoryHearts": "Hearts",
"emojiCategoryObjects": "Objects",
"gifPicker_title": "Choose a GIF",
"gifPicker_searchHint": "Search GIFs...",
"gifPicker_poweredBy": "Powered by GIPHY",
"gifPicker_noGifsFound": "No GIFs found",
"gifPicker_failedLoad": "Failed to load GIFs",
"gifPicker_failedSearch": "Failed to search GIFs",
"gifPicker_noInternet": "No internet connection",
"debugLog_appTitle": "App Debug Log",
"debugLog_bleTitle": "BLE Debug Log",
"debugLog_copyLog": "Copy log",
"debugLog_clearLog": "Clear log",
"debugLog_copied": "Debug log copied",
"debugLog_bleCopied": "BLE log copied",
"debugLog_noEntries": "No debug logs yet",
"debugLog_enableInSettings": "Enable app debug logging in settings",
"debugLog_frames": "Frames",
"debugLog_rawLogRx": "Raw Log-RX",
"debugLog_noBleActivity": "No BLE activity yet",
"debugFrame_length": "Frame Length: {count} bytes",
"@debugFrame_length": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"debugFrame_command": "Command: 0x{value}",
"@debugFrame_command": {
"placeholders": {
"value": {
"type": "String"
}
}
},
"debugFrame_textMessageHeader": "Text Message Frame:",
"debugFrame_destinationPubKey": "- Destination PubKey: {pubKey}",
"@debugFrame_destinationPubKey": {
"placeholders": {
"pubKey": {
"type": "String"
}
}
},
"debugFrame_timestamp": "- Timestamp: {timestamp}",
"@debugFrame_timestamp": {
"placeholders": {
"timestamp": {
"type": "int"
}
}
},
"debugFrame_flags": "- Flags: 0x{value}",
"@debugFrame_flags": {
"placeholders": {
"value": {
"type": "String"
}
}
},
"debugFrame_textType": "- Text Type: {type} ({label})",
"@debugFrame_textType": {
"placeholders": {
"type": {
"type": "int"
},
"label": {
"type": "String"
}
}
},
"debugFrame_textTypeCli": "CLI",
"debugFrame_textTypePlain": "Plain",
"debugFrame_text": "- Text: \"{text}\"",
"@debugFrame_text": {
"placeholders": {
"text": {
"type": "String"
}
}
},
"debugFrame_hexDump": "Hex Dump:",
"chat_hopsCount": "{count} {count, plural, =1{hop} other{hops}}",
"@chat_hopsCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"chat_removePath": "Remove path",
"chat_noPathHistoryYet": "No path history yet.\nSend a message to discover paths.",
"chat_pathCleared": "Path cleared. Next message will rediscover route.",
"chat_fullPath": "Full Path",
"routing_title": "Routing",
"routing_modeAuto": "Auto",
"routing_modeFlood": "Flood",
"routing_modeManual": "Manual",
"routing_modeAutoHint": "Picks the best known path automatically, flooding when none is known.",
"routing_modeFloodHint": "Broadcasts through every repeater. Most reliable, but uses more airtime.",
"routing_modeManualHint": "Always sends along the exact path you set.",
"routing_currentRoute": "Current route",
"routing_directNoHops": "Direct — no repeater hops",
"routing_noPathYet": "No path yet. The next message floods until a route is discovered.",
"routing_floodBroadcast": "Broadcast through every repeater",
"routing_editPath": "Edit path",
"routing_forgetPath": "Forget path",
"routing_knownPaths": "Known paths",
"routing_knownPathsHint": "Tap a path to switch to it.",
"routing_inUse": "In use",
"routing_qualityStrong": "Strong first hop",
"routing_qualityGood": "Good first hop",
"routing_qualityFair": "Fair first hop",
"routing_qualityWorked": "Has delivered",
"routing_qualityFlood": "Heard via flood",
"routing_qualityUntested": "Untested",
"routing_lastWorked": "worked {when}",
"@routing_lastWorked": {
"placeholders": {
"when": {
"type": "String"
}
}
},
"routing_neverWorked": "never confirmed",
"routing_deliveryCounts": "{successes} delivered, {failures} failed",
"@routing_deliveryCounts": {
"placeholders": {
"successes": {
"type": "int"
},
"failures": {
"type": "int"
}
}
},
"routing_floodDelivery": "Flood delivery",
"pathEditor_title": "Build Path",
"pathEditor_hopCounter": "{count} of 64 hops",
"@pathEditor_hopCounter": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"pathEditor_noHops": "No hops yet. Tap repeaters below to add them in order, or save with no hops to send direct.",
"pathEditor_addHops": "Add hops in order",
"pathEditor_searchRepeaters": "Search repeaters",
"pathEditor_advancedHex": "Advanced: raw hex path",
"pathEditor_hexLabel": "Hex prefixes",
"pathEditor_hexHelper": "Two hex characters per hop, separated by commas",
"pathEditor_invalidTokens": "Invalid: {tokens}",
"@pathEditor_invalidTokens": {
"placeholders": {
"tokens": {
"type": "String"
}
}
},
"pathEditor_tooManyHops": "Maximum 64 hops",
"pathEditor_usePath": "Use this path",
"pathEditor_removeHop": "Remove hop",
"pathEditor_unknownHop": "Unknown repeater",
"chat_pathSavedLocally": "Saved locally. Connect to sync.",
"chat_pathDeviceConfirmed": "Device confirmed.",
"chat_pathDeviceNotConfirmed": "Device not confirmed yet.",
"chat_type": "Type",
"chat_path": "Path",
"chat_viewPathOnMap": "View path on map",
"chat_publicKey": "Public Key",
"chat_compressOutgoingMessages": "Compress outgoing messages",
"chat_floodForced": "Flood (forced)",
"chat_directForced": "Direct (forced)",
"chat_hopsForced": "{count} hops (forced)",
"@chat_hopsForced": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"chat_floodAuto": "Flood (auto)",
"chat_direct": "Direct",
"chat_poiShared": "POI Shared",
"chat_unread": "Unread: {count}",
"@chat_unread": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"chat_markAsUnread": "Mark as Unread",
"chat_newMessages": "New messages",
"chat_today": "Today",
"chat_yesterday": "Yesterday",
"chat_openLink": "Open Link?",
"chat_openLinkConfirmation": "Do you want to open this link in your browser?",
"chat_open": "Open",
"chat_couldNotOpenLink": "Could not open link: {url}",
"@chat_couldNotOpenLink": {
"placeholders": {
"url": {
"type": "String"
}
}
},
"chat_invalidLink": "Invalid link format",
"map_title": "Node Map",
"map_searchHint": "Search node name or ID",
"map_activity": "Activity",
"map_online": "Online",
"map_recent": "Recent",
"map_stale": "Stale",
"map_visible": "Visible",
"map_hidden": "Hidden",
"map_centerOnNode": "Center on node",
"map_centerOnMe": "Center on my location",
"map_details": "Details",
"map_noGps": "No GPS",
"map_noResults": "No matching nodes",
"map_lineOfSight": "Line of Sight",
"map_losScreenTitle": "Line of Sight",
"map_noNodesWithLocation": "No nodes with location data",
"map_noNodesLocationHint": "No nodes with a recent location. Widen the time filter, or set your own location in Settings.",
"map_nodesNeedGps": "Nodes need to share their GPS coordinates\nto appear on the map",
"map_nodesCount": "Nodes: {count}",
"@map_nodesCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"map_pinsCount": "Pins: {count}",
"@map_pinsCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"map_chat": "Chat",
"map_repeater": "Repeater",
"map_room": "Room",
"map_sensor": "Sensor",
"map_pinDm": "Pin (DM)",
"map_pinPrivate": "Pin (Private)",
"map_pinPublic": "Pin (Public)",
"map_lastSeen": "Last Seen",
"map_disconnectConfirm": "Are you sure you want to disconnect from this device?",
"map_from": "From",
"map_source": "Source",
"map_flags": "Flags",
"map_type": "Type",
"map_path": "Path",
"map_location": "Location",
"map_estLocation": "Est. Location",
"map_publicKey": "Public Key",
"map_publicKeyPrefixHint": "e.g. ab12",
"map_shareMarkerHere": "Share marker here",
"map_setAsMyLocation": "Set as my location",
"map_pinLabel": "Pin label",
"map_label": "Label",
"map_labelUpdateHint": "Using the same label as before will update the marker for MeshCore Open recipients.",
"map_pointOfInterest": "Point of interest",
"map_sendToContact": "Send to contact",
"map_sendToChannel": "Send to channel",
"map_noChannelsAvailable": "No channels available",
"map_publicLocationShare": "Public location share",
"map_publicLocationShareConfirm": "You are about to share a location in {channelLabel}. This channel is public and anyone with the PSK can see it.",
"@map_publicLocationShareConfirm": {
"placeholders": {
"channelLabel": {
"type": "String"
}
}
},
"map_connectToShareMarkers": "Connect to a device to share markers",
"map_filterNodes": "Filter Nodes",
"map_nodeTypes": "Node Types",
"map_chatNodes": "Chat Nodes",
"map_repeaters": "Repeaters",
"map_otherNodes": "Other Nodes",
"map_showOverlaps": "Repeater Key Overlaps",
"map_keyPrefix": "Key Prefix",
"map_filterByKeyPrefix": "Filter by key prefix",
"map_publicKeyPrefix": "Public key prefix",
"map_markers": "Markers",
"map_showSharedMarkers": "Show shared markers",
"map_showGuessedLocations": "Show guessed node locations",
"map_clusterNodes": "Group nearby nodes",
"map_groupChip": "Group",
"map_clusterNodesSubtitle": "When zoomed out, show nearby nodes as one numbered circle",
"map_showDiscoveryContacts": "Show Discovery Contacts",
"map_guessedLocation": "Guessed location",
"map_lastSeenTime": "Last Seen Time",
"map_sharedPin": "Shared pin",
"map_sharedAt": "Shared",
"map_joinRoom": "Join Room",
"map_manageRepeater": "Manage Repeater",
"map_manageServer": "Manage Server",
"map_tapToAdd": "Tap on nodes to add them to the path.",
"map_runTrace": "Run path trace",
"map_runTraceWithReturnPath": "Return back on the same path.",
"map_removeLast": "Remove Last",
"map_pathTraceCancelled": "Path trace cancelled.",
"map_pathTraceAddMoreHint": "Tap more nodes to add hops, choose how the trace returns, then tap Run path trace.",
"map_pathTraceModeRoundTrip": "Round trip",
"map_pathTraceModeRoundTripHint": "The trace goes out through these hops and comes back the same way.",
"map_pathTraceModeAsEntered": "As entered",
"map_pathTraceModeAsEnteredHint": "The trace follows these hops exactly. Add the hops back to you yourself.",
"map_pathTraceViewLast": "View last result",
"mapCache_title": "Offline Map Cache",
"mapCache_selectAreaFirst": "Select an area to cache first",
"mapCache_noTilesToDownload": "No tiles to download for this area",
"mapCache_downloadTilesTitle": "Download tiles",
"mapCache_downloadTilesPrompt": "Download {count} tiles for offline use?",
"@mapCache_downloadTilesPrompt": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_downloadAction": "Download",
"mapCache_cachedTiles": "Cached {count} tiles",
"@mapCache_cachedTiles": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_cachedTilesWithFailed": "Cached {downloaded} tiles ({failed} failed)",
"@mapCache_cachedTilesWithFailed": {
"placeholders": {
"downloaded": {
"type": "int"
},
"failed": {
"type": "int"
}
}
},
"mapCache_clearOfflineCacheTitle": "Clear offline cache",
"mapCache_clearOfflineCachePrompt": "Remove all cached map tiles?",
"mapCache_offlineCacheCleared": "Offline cache cleared",
"mapCache_noAreaSelected": "No area selected",
"mapCache_cacheArea": "Cache Area",
"mapCache_useCurrentView": "Use Current View",
"mapCache_zoomRange": "Zoom Range",
"mapCache_estimatedTiles": "Estimated tiles: {count}",
"@mapCache_estimatedTiles": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_downloadedTiles": "Downloaded {completed} / {total}",
"@mapCache_downloadedTiles": {
"placeholders": {
"completed": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"mapCache_downloadTilesButton": "Download Tiles",
"mapCache_clearCacheButton": "Clear Cache",
"mapCache_failedDownloads": "Failed downloads: {count}",
"@mapCache_failedDownloads": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_cachedTilesLabel": "Cached tiles",
"mapCache_cachedTileSummaryLabel": "Cached tile summary",
"mapCache_bulkDownloadDisabledForSource": "Offline bulk downloads are disabled for {source}.",
"@mapCache_bulkDownloadDisabledForSource": {
"placeholders": {
"source": {
"type": "String"
}
}
},
"mapCache_bulkDownloadDisabledInConfig": "Offline bulk downloads are disabled for {source} in this app configuration.",
"@mapCache_bulkDownloadDisabledInConfig": {
"placeholders": {
"source": {
"type": "String"
}
}
},
"mapCache_summarySource": "Source: {source}",
"@mapCache_summarySource": {
"placeholders": {
"source": {
"type": "String"
}
}
},
"mapCache_summaryCachedTilesForSource": "Cached tiles for source: {count}",
"@mapCache_summaryCachedTilesForSource": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_summaryCachedInSelection": "Cached in selected area/zoom: {count}",
"@mapCache_summaryCachedInSelection": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"mapCache_summaryApproxCacheSize": "Approx cache size: {size}",
"@mapCache_summaryApproxCacheSize": {
"placeholders": {
"size": {
"type": "String"
}
}
},
"mapCache_boundsLabel": "N {north}, S {south}, E {east}, W {west}",
"@mapCache_boundsLabel": {
"placeholders": {
"north": {
"type": "String"
},
"south": {
"type": "String"
},
"east": {
"type": "String"
},
"west": {
"type": "String"
}
}
},
"time_justNow": "Just now",
"time_minutesAgo": "{minutes}m ago",
"@time_minutesAgo": {
"placeholders": {
"minutes": {
"type": "int"
}
}
},
"time_hoursAgo": "{hours}h ago",
"@time_hoursAgo": {
"placeholders": {
"hours": {
"type": "int"
}
}
},
"time_daysAgo": "{days}d ago",
"@time_daysAgo": {
"placeholders": {
"days": {
"type": "int"
}
}
},
"time_hour": "hour",
"time_hours": "hours",
"time_day": "day",
"time_days": "days",
"time_week": "week",
"time_weeks": "weeks",
"time_month": "month",
"time_months": "months",
"time_minutes": "minutes",
"time_allTime": "All Time",
"dialog_disconnect": "Disconnect",
"dialog_disconnectConfirm": "Are you sure you want to disconnect from this device?",
"login_repeaterLogin": "Repeater Login",
"login_roomLogin": "Room Server Login",
"login_password": "Password",
"login_enterPassword": "Enter password",
"login_showPassword": "Show password",
"login_hidePassword": "Hide password",
"login_savePassword": "Save password",
"login_savePasswordSubtitle": "Password will be stored securely on this device",
"login_repeaterDescription": "The admin password unlocks settings and the CLI. A guest password (or blank) shows status only.",
"login_roomDescription": "Enter the room password for guest or admin access.",
"login_advanced": "Advanced",
"login_routing": "Routing",
"login_routingMode": "Routing mode",
"login_autoUseSavedPath": "Auto (use saved path)",
"login_forceFloodMode": "Force Flood Mode",
"login_managePaths": "Manage Paths",
"login_login": "Login",
"login_attempt": "Attempt {current}/{max}",
"@login_attempt": {
"placeholders": {
"current": {
"type": "int"
},
"max": {
"type": "int"
}
}
},
"login_failed": "Login failed: {error}",
"@login_failed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"login_failedMessage": "Login failed. Either the password is incorrect or the repeater is unreachable.",
"common_reload": "Reload",
"common_clear": "Clear",
"common_clearSearch": "Clear search",
"path_currentPathLabel": "Current path",
"path_noRepeatersFound": "No repeaters or room servers found.",
"repeater_management": "Repeater Management",
"room_management": "Room Server Management",
"repeater_guest": "Repeater Information",
"room_guest": "Room Server Information",
"repeater_managementTools": "Management Tools",
"repeater_guestTools": "Guest Tools",
"repeater_roleAdmin": "ADMIN",
"repeater_roleGuest": "GUEST",
"repeater_status": "Status",
"repeater_statusSubtitle": "View repeater status, stats, and neighbors",
"repeater_telemetry": "Telemetry",
"repeater_telemetrySubtitle": "View telemetry of sensors and system stats",
"repeater_cli": "CLI",
"repeater_cliSubtitle": "Send commands to the repeater",
"repeater_neighbors": "Neighbors",
"repeater_neighborsSubtitle": "View zero hop neighbors.",
"repeater_settings": "Settings",
"repeater_settingsSubtitle": "Configure repeater parameters",
"repeater_clockSyncAfterLogin": "Clock sync after login",
"@repeater_clockSyncAfterLogin": {
"description": "Repeater setting: auto sync device clock after successful login"
},
"repeater_clockSyncAfterLoginSubtitle": "Automatically send \"clock sync\" after a successful login",
"@repeater_clockSyncAfterLoginSubtitle": {
"description": "Repeater setting subtitle: describes the clock sync after login behavior"
},
"repeater_statusTitle": "Repeater Status",
"repeater_routingMode": "Routing mode",
"repeater_refresh": "Refresh",
"repeater_statusRequestTimeout": "Status request timed out.",
"repeater_errorLoadingStatus": "Error loading status: {error}",
"@repeater_errorLoadingStatus": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"repeater_systemInformation": "System Information",
"repeater_battery": "Battery",
"repeater_clockAtLogin": "Clock (at login)",
"repeater_uptime": "Uptime",
"repeater_queueLength": "Queue Length",
"repeater_debugFlags": "Debug Flags",
"repeater_radioStatistics": "Radio Statistics",
"repeater_lastRssi": "Last RSSI",
"repeater_lastSnr": "Last SNR",
"repeater_noiseFloor": "Noise Floor",
"repeater_txAirtime": "TX Airtime",
"repeater_rxAirtime": "RX Airtime",
"repeater_chanUtil": "Channel Utilization",
"repeater_packetStatistics": "Packet Statistics",
"repeater_sent": "Sent",
"repeater_received": "Received",
"repeater_duplicates": "Duplicates",
"repeater_daysHoursMinsSecs": "{days} days {hours}h {minutes}m {seconds}s",
"@repeater_daysHoursMinsSecs": {
"placeholders": {
"days": {
"type": "int"
},
"hours": {
"type": "int"
},
"minutes": {
"type": "int"
},
"seconds": {
"type": "int"
}
}
},
"repeater_packetTxTotal": "Total: {total}, Flood: {flood}, Direct: {direct}",
"@repeater_packetTxTotal": {
"placeholders": {
"total": {
"type": "int"
},
"flood": {
"type": "String"
},
"direct": {
"type": "String"
}
}
},
"repeater_packetRxTotal": "Total: {total}, Flood: {flood}, Direct: {direct}",
"@repeater_packetRxTotal": {
"placeholders": {
"total": {
"type": "int"
},
"flood": {
"type": "String"
},
"direct": {
"type": "String"
}
}
},
"repeater_duplicatesFloodDirect": "Flood: {flood}, Direct: {direct}",
"@repeater_duplicatesFloodDirect": {
"placeholders": {
"flood": {
"type": "String"
},
"direct": {
"type": "String"
}
}
},
"repeater_duplicatesTotal": "Total: {total}",
"@repeater_duplicatesTotal": {
"placeholders": {
"total": {
"type": "int"
}
}
},
"repeater_settingsTitle": "Repeater Settings",
"repeater_basicSettings": "Basic Settings",
"repeater_repeaterName": "Repeater Name",
"repeater_repeaterNameHelper": "Display name for this repeater",
"repeater_adminPassword": "Admin Password",
"repeater_adminPasswordHelper": "Full access password",
"repeater_guestPassword": "Guest Password",
"repeater_guestPasswordHelper": "Read-only access password",
"repeater_radioSettings": "Radio Settings",
"repeater_frequencyMhz": "Frequency (MHz)",
"repeater_frequencyHelper": "300-2500 MHz",
"repeater_txPower": "TX Power",
"repeater_txPowerHelper": "1-30 dBm",
"repeater_bandwidth": "Bandwidth",
"repeater_spreadingFactor": "Spreading Factor",
"repeater_codingRate": "Coding Rate",
"repeater_locationSettings": "Location Settings",
"repeater_latitude": "Latitude",
"repeater_latitudeHelper": "Decimal degrees (e.g., 37.7749)",
"repeater_longitude": "Longitude",
"repeater_longitudeHelper": "Decimal degrees (e.g., -122.4194)",
"repeater_features": "Features",
"repeater_packetForwarding": "Packet Forwarding",
"repeater_packetForwardingSubtitle": "Enable repeater to forward packets",
"repeater_guestAccess": "Guest Access",
"repeater_guestAccessSubtitle": "Allow read-only guest access",
"repeater_privacyMode": "Privacy Mode",
"repeater_privacyModeSubtitle": "Hide name/location in advertisements",
"repeater_advertisementSettings": "Advertisement Settings",
"repeater_localAdvertInterval": "Local Advertisement Interval",
"repeater_localAdvertIntervalMinutes": "{minutes} minutes",
"@repeater_localAdvertIntervalMinutes": {
"placeholders": {
"minutes": {
"type": "int"
}
}
},
"repeater_floodAdvertInterval": "Flood Advertisement Interval",
"repeater_floodAdvertIntervalHours": "{hours} hours",
"@repeater_floodAdvertIntervalHours": {
"placeholders": {
"hours": {
"type": "int"
}
}
},
"repeater_encryptedAdvertInterval": "Encrypted Advertisement Interval",
"repeater_dangerZone": "Danger Zone",
"repeater_rebootRepeater": "Reboot Repeater",
"repeater_rebootRepeaterSubtitle": "Restart the repeater device",
"repeater_rebootRepeaterConfirm": "Are you sure you want to reboot this repeater?",
"repeater_regenerateIdentityKey": "Regenerate Identity Key",
"repeater_regenerateIdentityKeySubtitle": "Generate new public/private key pair",
"repeater_regenerateIdentityKeyConfirm": "This will generate a new identity for the repeater. Continue?",
"repeater_eraseFileSystem": "Erase File System",
"repeater_eraseFileSystemSubtitle": "Format the repeater file system",
"repeater_eraseFileSystemConfirm": "WARNING: This will erase all data on the repeater. This cannot be undone!",
"repeater_eraseSerialOnly": "Erase is only available over serial console.",
"repeater_commandSent": "Command sent: {command}",
"@repeater_commandSent": {
"placeholders": {
"command": {
"type": "String"
}
}
},
"repeater_errorSendingCommand": "Error sending command: {error}",
"@repeater_errorSendingCommand": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"repeater_confirm": "Confirm",
"repeater_settingsSaved": "Settings saved successfully",
"repeater_rxGain": "Boosted RX gain",
"repeater_rxGainHelper": "Higher sensitivity, more current draw (SX1262/SX1268 only)",
"repeater_multiAcks": "Multi-ACKs",
"repeater_multiAcksSubtitle": "Acknowledge messages over multiple paths for better delivery",
"repeater_networkHealth": "Network health",
"repeater_loopDetect": "Loop detection",
"repeater_loopDetectHelper": "Drop flood packets that look like routing loops",
"repeater_loopDetectOff": "Off",
"repeater_loopDetectMinimal": "Minimal",
"repeater_loopDetectModerate": "Moderate",
"repeater_loopDetectStrict": "Strict",
"repeater_dutyCycle": "Duty cycle",
"repeater_dutyCycleHelper": "Maximum percentage of airtime",
"repeater_dutyCyclePercent": "{percent}%",
"@repeater_dutyCyclePercent": {
"placeholders": {
"percent": {
"type": "int"
}
}
},
"repeater_ownerInfo": "Operator info",
"repeater_ownerInfoHelper": "Public metadata for this repeater",
"repeater_floodMax": "Flood max hops",
"repeater_floodMaxHelper": "Maximum hops a flood packet may travel (0-64)",
"repeater_advancedSettings": "Advanced",
"repeater_advancedSettingsSubtitle": "Tuning knobs for experienced operators",
"repeater_pathHashMode": "Node ID size in paths",
"repeater_pathHashModeHelper": "Size of this repeater's ID in the paths of adverts it sends: 1 byte (256 IDs, up to 64 hops), 2 bytes (65K IDs, up to 32 hops), 3 bytes (16M IDs, up to 21 hops). Does not affect forwarding; v1.14+ repeaters forward all sizes, but older firmware drops packets with 2- or 3-byte IDs.",
"repeater_keySettings": "Change Identity Keys",
"repeater_keySettingsSubtitle": "Change the public/private keypair",
"repeater_prvKey": "Private key",
"repeater_prvKeyHelper": "A new private key for the repeater, a 128-character hex string.",
"repeater_generatePrvKey": "Generate a random keypair",
"repeater_stopGeneratingPrvKey": "Interrupt search for keypair",
"repeater_pubKey": "Public key",
"repeater_pubKeyHelper": "This is the public key that goes with the generated private key. You can't set this directly.",
"repeater_pubKeyPrefix": "Desired prefix",
"repeater_pubKeyPrefixHelper": "Find a public key that starts with these hex digits. Expected tries needed: {tries}.",
"@repeater_pubKeyPrefixHelper": {
"placeholders": {
"tries": {
"type": "int"
}
}
},
"repeater_txDelay": "Flood TX delay",
"repeater_txDelayHelper": "Retransmit spacing for flood traffic, as a multiplier of the packet's airtime (0-2, default 0.5). Higher = fewer collisions but slower delivery.",
"repeater_directTxDelay": "Direct TX delay",
"repeater_directTxDelayHelper": "Retransmit spacing for direct (non-flood) traffic, as a multiplier of the packet's airtime (0-2, default 0.3).",
"repeater_intThresh": "Interference threshold",
"repeater_intThreshHelper": "Threshold passed to the radio's noise-floor calibration so it rejects interference above this level. 0 disables — only raise if you see RX errors in a noisy band.",
"repeater_agcResetInterval": "AGC reset interval",
"repeater_agcResetIntervalHelper": "How often to reset the radio's automatic gain control to recover from a stuck gain state. Seconds, snapped down to a multiple of 4. 0 disables periodic resets.",
"repeater_actionsTitle": "Actions",
"repeater_sendAdvert": "Send flood advert",
"repeater_sendAdvertSubtitle": "Broadcast a flood advert through the network",
"repeater_sendAdvertZeroHop": "Send zero-hop advert",
"repeater_sendAdvertZeroHopSubtitle": "Broadcast a one-hop advert (no relays)",
"repeater_clockSync": "Sync clock now",
"repeater_clockSyncSubtitle": "Push your phone's time to the repeater",
"repeater_actionSucceeded": "{action} succeeded",
"@repeater_actionSucceeded": {
"placeholders": {
"action": {
"type": "String"
}
}
},
"repeater_actionFailed": "{action} failed: {error}",
"@repeater_actionFailed": {
"placeholders": {
"action": {
"type": "String"
},
"error": {
"type": "String"
}
}
},
"repeater_settingsSavedRebootNeeded": "Settings saved — reboot the repeater to apply",
"repeater_settingsPartialFailure": "Some settings failed: {failures}",
"@repeater_settingsPartialFailure": {
"placeholders": {
"failures": {
"type": "String"
}
}
},
"repeater_errorSavingSettings": "Error saving settings: {error}",
"@repeater_errorSavingSettings": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"repeater_refreshRadioSettings": "Refresh Radio Settings",
"repeater_refreshPrivacyMode": "Refresh Privacy Mode",
"repeater_refreshAll": "Refresh all",
"repeater_settingsNotLoaded": "Settings haven't been loaded from this repeater yet.",
"repeater_settingsLoadIncomplete": "Some settings could not be loaded. Use the refresh buttons to retry.",
"repeater_refreshed": "{label} refreshed",
"@repeater_refreshed": {
"placeholders": {
"label": {
"type": "String"
}
}
},
"repeater_errorRefreshing": "Error refreshing {label}",
"@repeater_errorRefreshing": {
"placeholders": {
"label": {
"type": "String"
}
}
},
"repeater_cliTitle": "Repeater CLI",
"repeater_debugNextCommand": "Debug Next Command",
"repeater_commandHelp": "Command Help",
"repeater_clearHistory": "Clear History",
"repeater_noCommandsSent": "No commands sent yet",
"repeater_typeCommandOrUseQuick": "Type a command below or use quick commands",
"repeater_enterCommandHint": "Enter command...",
"repeater_previousCommand": "Previous command",
"repeater_nextCommand": "Next command",
"repeater_enterCommandFirst": "Enter a command first",
"repeater_cliCommandFrameTitle": "CLI Command Frame",
"repeater_cliCommandError": "Error: {error}",
"@repeater_cliCommandError": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"repeater_cliQuickGetName": "Get Name",
"repeater_cliQuickGetRadio": "Get Radio",
"repeater_cliQuickGetTx": "Get TX",
"repeater_cliQuickNeighbors": "Neighbors",
"repeater_cliQuickVersion": "Version",
"repeater_cliQuickAdvertise": "Advertise",
"repeater_cliQuickClock": "Clock",
"repeater_cliQuickClockSync": "Clock Sync",
"repeater_cliQuickDiscovery": "Discover Neighbors",
"repeater_cliHelpAdvert": "Sends an advertisement packet",
"repeater_cliHelpReboot": "Reboots the device. (note, you'll prob get 'Timeout' which is normal)",
"repeater_cliHelpClock": "Displays current time per device's clock.",
"repeater_cliHelpPassword": "Sets a new admin password for the device.",
"repeater_cliHelpVersion": "Shows the device version and firmware build date.",
"repeater_cliHelpClearStats": "Resets various stats counters to zero.",
"repeater_cliHelpSetAf": "Sets the air-time-factor.",
"repeater_cliHelpSetTx": "Sets LoRa transmit power in dBm. (reboot to apply)",
"repeater_cliHelpSetRepeat": "Enables or disables the repeater role for this node.",
"repeater_cliHelpSetAllowReadOnly": "(Room server) If 'on', then login in blank password will be allowed, but cannot Post to room. (just read only)",
"repeater_cliHelpSetFloodMax": "Sets the maximum number of hops of inbound flood packet (if >= max, packet is not forwarded)",
"repeater_cliHelpSetIntThresh": "Sets the Interference Threshold (in DB). Default is 14. Set to 0 to disable channel interference detection.",
"repeater_cliHelpSetAgcResetInterval": "Sets the interval to reset the Auto Gain Controller. Set to 0 to disable.",
"repeater_cliHelpSetMultiAcks": "Enables or disables the 'double ACKs' feature.",
"repeater_cliHelpSetAdvertInterval": "Sets the timer interval in minutes to send a local (zero-hop) advertisement packet. Set to 0 to disable.",
"repeater_cliHelpSetFloodAdvertInterval": "Sets the timer interval in hours to send a flood advertisement packet. Set to 0 to disable.",
"repeater_cliHelpSetGuestPassword": "Sets/updates the guest password. (for repeaters, guest logins can send the \"Get Stats\" request)",
"repeater_cliHelpSetName": "Sets the advertisement name.",
"repeater_cliHelpSetLat": "Sets the advertisement map latitude. (decimal degrees)",
"repeater_cliHelpSetLon": "Sets the advertisement map longitude. (decimal degrees)",
"repeater_cliHelpSetRadio": "Sets completely new radio params, and saves to preferences. Requires a \"reboot\" command to apply.",
"repeater_cliHelpSetRxDelay": "Sets (experimental) base (must be > 1 for effect) for applying slight delay to received packets, based on signal strength/score. Set to 0 to disable.",
"repeater_cliHelpSetTxDelay": "Sets a factor multiplied with time-on-air for a flood-mode packet and with a randomized slot system, to delay its forwarding. (to decrease likelihood of collisions)",
"repeater_cliHelpSetDirectTxDelay": "Same as txdelay, but for applying a random delay to the forwarding of direct-mode packets.",
"repeater_cliHelpSetBridgeEnabled": "Enable/Disable bridge.",
"repeater_cliHelpSetBridgeDelay": "Set delay before retransmitting packets.",
"repeater_cliHelpSetBridgeSource": "Choose wether the bridge will retransmit received packets or transmitted packets.",
"repeater_cliHelpSetBridgeBaud": "Set serial link baudrate for rs232 bridges.",
"repeater_cliHelpSetBridgeSecret": "Set bridge secret for espnow bridges.",
"repeater_cliHelpSetAdcMultiplier": "Sets custom factor to adjust reported battery voltage (only supported on select boards).",
"repeater_cliHelpTempRadio": "Sets temporary radio params for the given number of minutes, reverting to original radio params afterward. (does NOT save to preferences).",
"repeater_cliHelpSetPerm": "Modifies the ACL. Removes matching entry (by pubkey prefix) if \"permissions\" is zero. Adds new entry if pubkey-hex is full length and is not currently in ACL. Updates entry by matching pubkey prefix. Permission bits vary per firmware role, but low 2 bits are: 0 (Guest), 1 (Read only), 2 (Read write), 3 (Admin)",
"repeater_cliHelpGetBridgeType": "Gets bridge type none, rs232, espnow",
"repeater_cliHelpLogStart": "Starts packet logging to file system.",
"repeater_cliHelpLogStop": "Stops packet logging to file system.",
"repeater_cliHelpLogErase": "Erases the packet logs from file system.",
"repeater_cliHelpNeighbors": "Shows a list of other repeater nodes heard via zero-hop adverts. Each line is id-prefix-hex:timestamp:snr-times-4",
"repeater_cliHelpNeighborRemove": "Removes first matching entry (by pubkey prefix (hex)), from neighbors list.",
"repeater_cliHelpRegion": "(serial only) Lists all defined regions and current flood permissions.",
"repeater_cliHelpRegionLoad": "NOTE: this is a special multi-command invocation. Each subsequent command is a region name (indented with spaces to indicate parent hierarchy, with one space at minimum). Terminated by sending a blank line/command.",
"repeater_cliHelpRegionGet": "Searches for region with given name prefix (or \"*\" for the global scope). Replies with \"-> region-name (parent-name) 'F'\"",
"repeater_cliHelpRegionPut": "Adds or updates a region definition with given name.",
"repeater_cliHelpRegionRemove": "Removes a region definition with given name. (must match exactly, and have no child regions)",
"repeater_cliHelpRegionAllowf": "Sets the 'F'lood permission for the given region. ('*' for the global/legacy scope)",
"repeater_cliHelpRegionDenyf": "Removes the 'F'lood permission for the given region. (NOTE: at this stage NOT advised to use this on the global/legacy scope!!)",
"repeater_cliHelpRegionHome": "Replies with the current 'home' region. (Note applied anywhere yet, reserved for future)",
"repeater_cliHelpRegionHomeSet": "Sets the 'home' region.",
"repeater_cliHelpRegionSave": "Persists the region list/map to storage.",
"repeater_cliHelpGps": "Gives status of gps. When gps is off, it replies only off, if on it replies with on, status, fix, sat count",
"repeater_cliHelpGpsOnOff": "Toggles gps power state.",
"repeater_cliHelpGpsSync": "Syncs node time with gps clock.",
"repeater_cliHelpGpsSetLoc": "Sets node's position to gps coordinates and save preferences.",
"repeater_cliHelpGpsAdvert": "Gives location advert configuration of the node:\n- none: don't include location in adverts\n- share: share gps location (from SensorManager)\n- prefs: advert the location stored in preferences",
"repeater_cliHelpGpsAdvertSet": "Sets location advert configuration.",
"repeater_commandsListTitle": "Commands List",
"repeater_commandsListNote": "NOTE: for the various \"set ...\" commands, there is also a \"get ...\" command.",
"repeater_frequencyRangeHelper": "150-2500 MHz",
"repeater_frequencyInvalid": "Invalid frequency (150-2500 MHz)",
"repeater_txPowerRangeHelper": "-9 to 30 dBm",
"repeater_recvErrors": "Receive Errors",
"room_postsStored": "Posts",
"room_postsPushed": "Posts Pushed",
"repeater_cliRegionLoadActive": "Region load mode: send one region name per line, indented with spaces under its parent (add F after the name to allow flood). Lines get no reply. Send an empty line to finish, then \"region save\" to keep the result.",
"repeater_cliRegionLoadHint": "Region line, or empty to finish",
"repeater_cliRegionLoadEnd": "(end of region load)",
"repeater_cliHelpRegionDef": "Defines a chain of regions in one command: each name is added under the previous one; \"name,parent\" adds the name, then continues under the given parent. Replies with the region list.",
"repeater_cliHelpSetFloodMaxUnscoped": "Sets the maximum hop count for forwarding flood packets that have no region scope (0-64).",
"repeater_cliHelpSetFloodMaxAdvert": "Sets the maximum hop count for forwarding flood adverts (0-64).",
"repeater_cliHelpGetFloodMaxUnscoped": "Shows the maximum hop count for unscoped flood packets.",
"repeater_cliHelpGetFloodMaxAdvert": "Shows the maximum hop count for flood adverts.",
"repeater_cliHelpSetRadioFemRxGain": "Toggles the LoRa front-end module's RX gain (LNA). Boards without one reply \"Error: unsupported\".",
"repeater_cliHelpSetRadioFemTxGain": "Toggles the LoRa front-end module's TX gain (PA). Boards without one reply \"Error: unsupported\".",
"repeater_cliHelpGetRadioFemRxGain": "Shows whether the LoRa front-end module's RX gain is on.",
"repeater_cliHelpGetRadioFemTxGain": "Shows whether the LoRa front-end module's TX gain is on.",
"repeater_bridgeNote": "Only available on firmware built with a bridge (RS232 or ESP-NOW).",
"repeater_general": "General",
"repeater_settingsCategory": "Settings",
"repeater_bridge": "Bridge",
"repeater_logging": "Logging",
"repeater_neighborsRepeaterOnly": "Neighbors (Repeater only)",
"repeater_regionManagementRepeaterOnly": "Region Management (Repeater only)",
"repeater_regionNote": "Region commands have been introduced to manage region definitions and permissions.",
"repeater_gpsManagement": "GPS Management",
"repeater_gpsNote": "gps command has been introduced to manage location related topics.",
"repeater_getCategory": "Get Values",
"repeater_powerMgmt": "Power Management",
"repeater_sensors": "Sensors",
"repeater_cliHelpPowerOff": "Powers the device off. (no response expected)",
"repeater_cliHelpClkReboot": "Resets the clock to a known epoch and reboots the device.",
"repeater_cliHelpAdvertZeroHop": "Sends a zero-hop advertisement (immediate neighbors only).",
"repeater_cliHelpStartOta": "Starts an over-the-air firmware update on supported boards.",
"repeater_cliHelpTime": "Sets the device clock to the given Unix epoch seconds. Clock cannot move backwards.",
"repeater_cliHelpBoard": "Shows the board manufacturer / hardware identifier.",
"repeater_cliHelpDiscoverNeighbors": "Sends a node-discovery request to nearby neighbors. (Repeater only)",
"repeater_cliHelpPowersaving": "Shows whether powersaving mode is on or off.",
"repeater_cliHelpPowersavingOnOff": "Enables or disables powersaving mode (where supported).",
"repeater_cliHelpErase": "(Serial only) Formats the device file system. Wipes all settings and contacts.",
"repeater_cliHelpSetDutyCycle": "Sets the maximum allowed transmit duty cycle as a percentage (1-100). Internally adjusts the airtime factor.",
"repeater_cliHelpSetPrvKey": "Replaces the device identity private key. Reboot required to apply. Generates a new public key.",
"repeater_cliHelpSetRadioRxGain": "(SX126x only) Toggles boosted RX gain for improved sensitivity at higher current draw.",
"repeater_cliHelpSetOwnerInfo": "Sets the owner contact info string included in adverts. Use '|' for newlines.",
"repeater_cliHelpSetPathHashMode": "Sets the node ID size used in this repeater's adverts: 0 = 1 byte (up to 64 hops), 1 = 2 bytes (up to 32 hops), 2 = 3 bytes (up to 21 hops). 3 is reserved. Does not affect which sizes are forwarded. Requires firmware v1.14+.",
"repeater_cliHelpSetLoopDetect": "Sets the routing loop-detection sensitivity: off, minimal, moderate, or strict.",
"repeater_cliHelpSetFreq": "(Serial only) Quickly sets just the frequency. Reboot required. Prefer \"set radio\" for full radio params.",
"repeater_cliHelpSetBridgeChannel": "(ESPNow bridge only) Sets the WiFi channel (1-14) used by the bridge.",
"repeater_cliHelpGetName": "Shows the configured node name.",
"repeater_cliHelpGetRole": "Shows the firmware role (Repeater, Room Server, etc.).",
"repeater_cliHelpGetPublicKey": "Shows the device public key.",
"repeater_cliHelpGetPrvKey": "(Serial only) Shows the device private key. Treat as a secret.",
"repeater_cliHelpGetRepeat": "Shows whether packet forwarding (repeater role) is on or off.",
"repeater_cliHelpGetTx": "Shows the current TX power in dBm.",
"repeater_cliHelpGetFreq": "Shows the configured radio frequency in MHz.",
"repeater_cliHelpGetRadio": "Shows full radio params: freq, bandwidth, spreading factor, coding rate.",
"repeater_cliHelpGetRadioRxGain": "(SX126x only) Shows the RX boosted gain state.",
"repeater_cliHelpGetAf": "Shows the current airtime factor.",
"repeater_cliHelpGetDutyCycle": "Shows the current allowed duty cycle as a percentage.",
"repeater_cliHelpGetIntThresh": "Shows the channel interference threshold in dB.",
"repeater_cliHelpGetAgcResetInterval": "Shows the AGC reset interval in seconds.",
"repeater_cliHelpGetMultiAcks": "Shows whether double-ACK mode is on (1) or off (0).",
"repeater_cliHelpGetAllowReadOnly": "Shows whether guest read-only access is allowed.",
"repeater_cliHelpGetAdvertInterval": "Shows the local advertisement interval in minutes.",
"repeater_cliHelpGetFloodAdvertInterval": "Shows the flood advertisement interval in hours.",
"repeater_cliHelpGetGuestPassword": "Shows the configured guest password.",
"repeater_cliHelpGetLat": "Shows the configured latitude.",
"repeater_cliHelpGetLon": "Shows the configured longitude.",
"repeater_cliHelpGetRxDelay": "Shows the rxdelay base value.",
"repeater_cliHelpGetTxDelay": "Shows the flood-mode txdelay factor.",
"repeater_cliHelpGetDirectTxDelay": "Shows the direct-mode txdelay factor.",
"repeater_cliHelpGetFloodMax": "Shows the maximum flood hop count.",
"repeater_cliHelpGetOwnerInfo": "Shows the owner contact info string.",
"repeater_cliHelpGetPathHashMode": "Shows the node ID size mode used in adverts (0 = 1 byte, 1 = 2 bytes, 2 = 3 bytes).",
"repeater_cliHelpGetLoopDetect": "Shows the loop-detection sensitivity.",
"repeater_cliHelpGetAcl": "(Serial only) Lists the access-control entries on a repeater.",
"repeater_cliHelpGetBridgeEnabled": "Shows whether the bridge is enabled.",
"repeater_cliHelpGetBridgeDelay": "Shows the bridge delay in ms.",
"repeater_cliHelpGetBridgeSource": "Shows whether the bridge logs RX or TX packets.",
"repeater_cliHelpGetBridgeBaud": "(RS232 bridge only) Shows the bridge baud rate.",
"repeater_cliHelpGetBridgeChannel": "(ESPNow bridge only) Shows the bridge WiFi channel.",
"repeater_cliHelpGetBridgeSecret": "(ESPNow bridge only) Shows the bridge shared secret.",
"repeater_cliHelpGetBootloaderVer": "(NRF52 only) Shows the bootloader version.",
"repeater_cliHelpGetAdcMultiplier": "Shows the ADC multiplier (battery-voltage scaling).",
"repeater_cliHelpGetPwrMgtSupport": "Reports whether the board has power-management support.",
"repeater_cliHelpGetPwrMgtSource": "Shows the current power source: external or battery.",
"repeater_cliHelpGetPwrMgtBootReason": "Shows the most recent reset and shutdown reasons.",
"repeater_cliHelpGetPwrMgtBootMv": "Shows the boot-time battery voltage in mV.",
"repeater_cliHelpSensorGet": "Reads a custom sensor setting by key.",
"repeater_cliHelpSensorSet": "Writes a custom sensor setting.",
"repeater_cliHelpSensorList": "Lists all custom sensor settings, paginated from optional start index.",
"repeater_cliHelpRegionDefault": "Shows the current default region scope.",
"repeater_cliHelpRegionDefaultSet": "Sets the default region scope. Use \"<null>\" to clear.",
"repeater_cliHelpRegionListAllowed": "Lists regions that allow flood traffic.",
"repeater_cliHelpRegionListDenied": "Lists regions that deny flood traffic.",
"repeater_cliHelpStatsPackets": "(Serial only) Shows packet-level statistics.",
"repeater_cliHelpStatsRadio": "(Serial only) Shows radio statistics.",
"repeater_cliHelpStatsCore": "(Serial only) Shows core firmware statistics.",
"telemetry_receivedData": "Received Telemetry Data",
"telemetry_requestTimeout": "Telemetry request timed out.",
"telemetry_errorLoading": "Error loading telemetry: {error}",
"@telemetry_errorLoading": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"telemetry_noData": "No telemetry data available.",
"telemetry_channelTitle": "Channel {channel}",
"@telemetry_channelTitle": {
"placeholders": {
"channel": {
"type": "int"
}
}
},
"telemetry_batteryLabel": "Battery",
"telemetry_voltageLabel": "Voltage",
"telemetry_mcuTemperatureLabel": "MCU Temperature",
"telemetry_temperatureLabel": "Temperature",
"telemetry_currentLabel": "Current",
"telemetry_batteryValue": "{percent}% / {volts}V",
"@telemetry_batteryValue": {
"placeholders": {
"percent": {
"type": "int"
},
"volts": {
"type": "String"
}
}
},
"telemetry_voltageValue": "{volts}V",
"@telemetry_voltageValue": {
"placeholders": {
"volts": {
"type": "String"
}
}
},
"telemetry_currentValue": "{amps}A",
"@telemetry_currentValue": {
"placeholders": {
"amps": {
"type": "String"
}
}
},
"telemetry_temperatureValue": "{celsius}°C / {fahrenheit}°F",
"@telemetry_temperatureValue": {
"placeholders": {
"celsius": {
"type": "String"
},
"fahrenheit": {
"type": "String"
}
}
},
"telemetry_digitalInputLabel": "Digital Input",
"telemetry_digitalOutputLabel": "Digital Output",
"telemetry_analogInputLabel": "Analog Input",
"telemetry_analogOutputLabel": "Analog Output",
"telemetry_genericLabel": "Generic Sensor",
"telemetry_luminosityLabel": "Luminosity",
"telemetry_presenceLabel": "Presence",
"telemetry_humidityLabel": "Humidity",
"telemetry_accelerometerLabel": "Accelerometer",
"telemetry_pressureLabel": "Pressure",
"telemetry_altitudeLabel": "Altitude",
"telemetry_frequencyLabel": "Frequency",
"telemetry_percentageLabel": "Percentage",
"telemetry_concentrationLabel": "Concentration",
"telemetry_powerLabel": "Power",
"telemetry_distanceLabel": "Distance",
"telemetry_energyLabel": "Energy",
"telemetry_directionLabel": "Direction",
"telemetry_timeLabel": "Time",
"telemetry_gyrometerLabel": "Gyrometer",
"telemetry_colourLabel": "Colour",
"telemetry_gpsLabel": "GPS",
"telemetry_switchLabel": "Switch",
"telemetry_polylineLabel": "Polyline",
"telemetry_altitudeValue": "{meters} m",
"@telemetry_altitudeValue": {
"placeholders": {
"meters": {
"type": "String"
}
}
},
"telemetry_frequencyValue": "{hertz} Hz",
"@telemetry_frequencyValue": {
"placeholders": {
"hertz": {
"type": "String"
}
}
},
"telemetry_pressureValue": "{hpa} hPa",
"@telemetry_pressureValue": {
"placeholders": {
"hpa": {
"type": "String"
}
}
},
"telemetry_luminosityValue": "{lux} lx",
"@telemetry_luminosityValue": {
"placeholders": {
"lux": {
"type": "String"
}
}
},
"telemetry_powerValue": "{watts} W",
"@telemetry_powerValue": {
"placeholders": {
"watts": {
"type": "String"
}
}
},
"telemetry_distanceValue": "{meters} m",
"@telemetry_distanceValue": {
"placeholders": {
"meters": {
"type": "String"
}
}
},
"telemetry_energyValue": "{kilowattHours} kWh",
"@telemetry_energyValue": {
"placeholders": {
"kilowattHours": {
"type": "String"
}
}
},
"telemetry_directionValue": "{degrees}°",
"@telemetry_directionValue": {
"placeholders": {
"degrees": {
"type": "String"
}
}
},
"telemetry_concentrationValue": "{ppm} ppm",
"@telemetry_concentrationValue": {
"placeholders": {
"ppm": {
"type": "String"
}
}
},
"telemetry_percentageValue": "{percent}%",
"@telemetry_percentageValue": {
"placeholders": {
"percent": {
"type": "String"
}
}
},
"telemetry_analogValue": "{value}",
"@telemetry_analogValue": {
"placeholders": {
"value": {
"type": "String"
}
}
},
"telemetry_autoFetchQuantity": "Requests quantity",
"telemetry_error": "Unable to retrieve data",
"neighbors_receivedData": "Received Neighbors Data",
"neighbors_requestTimedOut": "Neighbors request timed out.",
"neighbors_errorLoading": "Error loading neighbors: {error}",
"@neighbors_errorLoading": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"neighbors_repeatersNeighbors": "Repeaters Neighbors",
"neighbors_noData": "No neighbors data available.",
"neighbors_unknownContact": "Unknown {pubkey}",
"@neighbors_unknownContact": {
"placeholders": {
"pubkey": {
"type": "String"
}
}
},
"neighbors_heardAgo": "Heard: {time} ago",
"@neighbors_heardAgo": {
"placeholders": {
"time": {
"type": "String"
}
}
},
"channelPath_title": "Packet Path",
"channelPath_viewMap": "View map",
"channelPath_otherObservedPaths": "Other Observed Paths",
"channelPath_repeaterHops": "Repeater Hops",
"channelPath_noHopDetails": "Hop details are not provided for this packet.",
"channelPath_messageDetails": "Message Details",
"channelPath_senderLabel": "Sender",
"channelPath_timeLabel": "Time",
"channelPath_repeatsLabel": "Repeats",
"channelPath_pathLabel": "Path {index}",
"channelPath_observedLabel": "Observed",
"channelPath_observedPathTitle": "Observed path {index} • {hops}",
"@channelPath_observedPathTitle": {
"placeholders": {
"index": {
"type": "int"
},
"hops": {
"type": "String"
}
}
},
"channelPath_noLocationData": "No location data",
"channelPath_timeWithDate": "{day}/{month} {time}",
"@channelPath_timeWithDate": {
"placeholders": {
"day": {
"type": "int"
},
"month": {
"type": "int"
},
"time": {
"type": "String"
}
}
},
"channelPath_timeOnly": "{time}",
"@channelPath_timeOnly": {
"placeholders": {
"time": {
"type": "String"
}
}
},
"channelPath_unknownPath": "Unknown",
"channelPath_floodPath": "Flood",
"channelPath_directPath": "Direct",
"channelPath_observedZeroOf": "0 of {total} hops",
"@channelPath_observedZeroOf": {
"placeholders": {
"total": {
"type": "int"
}
}
},
"channelPath_observedSomeOf": "{observed} of {total} hops",
"@channelPath_observedSomeOf": {
"placeholders": {
"observed": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"channelPath_mapTitle": "Path Map",
"channelPath_noRepeaterLocations": "No repeater locations available for this path.",
"channelPath_primaryPath": "Path {index} (Primary)",
"@channelPath_primaryPath": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"@channelPath_pathLabel": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"channelPath_pathLabelTitle": "Path",
"channelPath_observedPathHeader": "Observed Path",
"channelPath_selectedPathLabel": "{label} • {prefixes}",
"@channelPath_selectedPathLabel": {
"placeholders": {
"label": {
"type": "String"
},
"prefixes": {
"type": "String"
}
}
},
"channelPath_noHopDetailsAvailable": "No hop details available for this packet.",
"channelPath_unknownRepeater": "Unknown Repeater",
"community_title": "Community",
"community_create": "Create Community",
"community_createDesc": "Create a new community and share via QR code.",
"community_join": "Join",
"community_joinTitle": "Join Community",
"community_joinConfirmation": "Do you want to join the community \"{name}\"?",
"@community_joinConfirmation": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_scanQr": "Scan Community QR",
"community_scanInstructions": "Point the camera at a community QR code",
"community_showQr": "Show QR Code",
"community_publicChannel": "Community Public",
"community_hashtagChannel": "Community Hashtag",
"community_name": "Community Name",
"community_enterName": "Enter community name",
"community_created": "Community \"{name}\" created",
"@community_created": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_joined": "Joined community \"{name}\"",
"@community_joined": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_qrTitle": "Share Community",
"community_qrInstructions": "Scan this QR code to join \"{name}\"",
"@community_qrInstructions": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_hashtagPrivacyHint": "Community hashtag channels are only joinable by members of the community",
"community_invalidQrCode": "Invalid community QR code",
"community_alreadyMember": "Already a Member",
"community_alreadyMemberMessage": "You are already a member of \"{name}\".",
"@community_alreadyMemberMessage": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_addPublicChannel": "Add Community Public Channel",
"community_addPublicChannelHint": "Automatically add the public channel for this community",
"community_noCommunities": "No communities joined yet",
"community_scanOrCreate": "Scan a QR code or create a community to get started",
"community_manageCommunities": "Manage Communities",
"community_delete": "Leave Community",
"community_deleteConfirm": "Leave \"{name}\"?",
"@community_deleteConfirm": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_deleteChannelsWarning": "This will also delete {count} channel(s) and their messages.",
"@community_deleteChannelsWarning": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"community_deleted": "Left community \"{name}\"",
"@community_deleted": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_regenerateSecret": "Regenerate Secret",
"community_regenerateSecretConfirm": "Regenerate the secret key for \"{name}\"? All members will need to scan the new QR code to continue communicating.",
"@community_regenerateSecretConfirm": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_regenerate": "Regenerate",
"community_secretRegenerated": "Secret regenerated for \"{name}\"",
"@community_secretRegenerated": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_updateSecret": "Update Secret",
"community_secretUpdated": "Secret updated for \"{name}\"",
"@community_secretUpdated": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_scanToUpdateSecret": "Scan the new QR code to update the secret for \"{name}\"",
"@community_scanToUpdateSecret": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"community_addHashtagChannel": "Add Community Hashtag",
"community_addHashtagChannelDesc": "Add a hashtag channel for this community",
"community_selectCommunity": "Select Community",
"community_regularHashtag": "Regular Hashtag",
"community_regularHashtagDesc": "Public hashtag (anyone can join)",
"community_communityHashtag": "Community Hashtag",
"community_communityHashtagDesc": "Private to community members",
"community_forCommunity": "For {name}",
"@community_forCommunity": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"listFilter_tooltip": "Filter and sort",
"listFilter_sortBy": "Sort by",
"listFilter_latestMessages": "Latest messages",
"listFilter_heardRecently": "Heard recently",
"listFilter_az": "A-Z",
"listFilter_filters": "Filters",
"listFilter_all": "All",
"listFilter_favorites": "Favorites",
"listFilter_addToFavorites": "Add to favorites",
"listFilter_removeFromFavorites": "Remove from favorites",
"listFilter_users": "Users",
"listFilter_repeaters": "Repeaters",
"listFilter_roomServers": "Room servers",
"listFilter_unreadOnly": "Unread only",
"listFilter_newGroup": "New group",
"pathTrace_you": "You",
"pathTrace_failed": "Path trace failed.",
"pathTrace_notAvailable": "Path trace not available.",
"pathTrace_refreshTooltip": "Refresh Path Trace.",
"pathTrace_someHopsNoLocation": "One or more of the hops is missing a location!",
"pathTrace_clearTooltip": "Clear path.",
"losSelectStartEnd": "Select start and end nodes for LOS.",
"losRunFailed": "Line-of-sight check failed: {error}",
"@losRunFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"losClearAllPoints": "Clear all points",
"losRunToViewElevationProfile": "Run LOS to view elevation profile",
"losMenuTitle": "LOS Menu",
"losMenuSubtitle": "Tap nodes or long-press map for custom points",
"losShowDisplayNodes": "Show display nodes",
"losCustomPoints": "Custom points",
"losCustomPointLabel": "Custom {index}",
"@losCustomPointLabel": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"losPointA": "Point A",
"losPointB": "Point B",
"losAntennaA": "Antenna A: {value} {unit}",
"@losAntennaA": {
"placeholders": {
"value": {
"type": "String"
},
"unit": {
"type": "String"
}
}
},
"losAntennaB": "Antenna B: {value} {unit}",
"@losAntennaB": {
"placeholders": {
"value": {
"type": "String"
},
"unit": {
"type": "String"
}
}
},
"losRun": "Run LOS",
"losNoElevationData": "No elevation data",
"losProfileClear": "{distance} {distanceUnit}, clear LOS, min clearance {clearance} {heightUnit}",
"@losProfileClear": {
"placeholders": {
"distance": {
"type": "String"
},
"distanceUnit": {
"type": "String"
},
"clearance": {
"type": "String"
},
"heightUnit": {
"type": "String"
}
}
},
"losProfileBlocked": "{distance} {distanceUnit}, blocked by {obstruction} {heightUnit}",
"@losProfileBlocked": {
"placeholders": {
"distance": {
"type": "String"
},
"distanceUnit": {
"type": "String"
},
"obstruction": {
"type": "String"
},
"heightUnit": {
"type": "String"
}
}
},
"losStatusChecking": "LOS: checking...",
"losStatusNoData": "LOS: no data",
"losStatusSummary": "LOS: {clear}/{total} clear, {blocked} blocked, {unknown} unknown",
"@losStatusSummary": {
"placeholders": {
"clear": {
"type": "int"
},
"total": {
"type": "int"
},
"blocked": {
"type": "int"
},
"unknown": {
"type": "int"
}
}
},
"losErrorElevationUnavailable": "Elevation data unavailable for one or more samples.",
"losErrorInvalidInput": "Invalid points/elevation data for LOS calculation.",
"losRenameCustomPoint": "Rename custom point",
"losPointName": "Point name",
"losShowPanelTooltip": "Show LOS panel",
"losHidePanelTooltip": "Hide LOS panel",
"losElevationAttribution": "Elevation data: Open-Meteo (CC BY 4.0)",
"losLegendRadioHorizon": "Radio horizon",
"losLegendLosBeam": "LOS beam",
"losLegendTerrain": "Terrain",
"losBlockedSpotsTitle": "Blocked spots",
"losBlockedSpotsHint": "Tap a blocked spot to highlight it on the map.",
"losBlockedSpotChip": "{distance} {distanceUnit} • {obstruction} {heightUnit}",
"@losBlockedSpotChip": {
"placeholders": {
"distance": {
"type": "String"
},
"distanceUnit": {
"type": "String"
},
"obstruction": {
"type": "String"
},
"heightUnit": {
"type": "String"
}
}
},
"losSelectedObstructionTitle": "Selected obstruction",
"losSelectedObstructionDetails": "Blocked by {obstruction} {heightUnit}, {distanceFromA} from A and {distanceFromB} from B ({distanceUnit}).",
"@losSelectedObstructionDetails": {
"placeholders": {
"obstruction": {
"type": "String"
},
"heightUnit": {
"type": "String"
},
"distanceFromA": {
"type": "String"
},
"distanceUnit": {
"type": "String"
},
"distanceFromB": {
"type": "String"
}
}
},
"losFrequencyLabel": "Frequency",
"losFrequencyInfoTooltip": "View calculation details",
"losFrequencyDialogTitle": "Radio horizon calculation",
"losFrequencyDialogDescription": "Starting from k={baselineK} at {baselineFreq} MHz, the calculation adjusts the k-factor for the current {frequencyMHz} MHz band, which defines the curved radio horizon cap.",
"@losFrequencyDialogDescription": {
"description": "Explain how the calculation uses the baseline frequency and derived k-factor.",
"placeholders": {
"baselineK": {
"type": "double"
},
"baselineFreq": {
"type": "double"
},
"frequencyMHz": {
"type": "double"
},
"kFactor": {
"type": "double"
}
}
},
"contacts_pathTrace": "Path Trace",
"contacts_ping": "Ping",
"contacts_repeaterPathTrace": "Path trace to repeater",
"contacts_repeaterPing": "Ping repeater",
"contacts_roomPathTrace": "Path trace to room server",
"contacts_roomPing": "Ping room server",
"contacts_chatTraceRoute": "Path trace route",
"contacts_pathTraceTo": "Trace route to {name}",
"@contacts_pathTraceTo": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"contacts_clipboardEmpty": "Clipboard is empty.",
"contacts_invalidAdvertFormat": "Invalid contact data",
"contacts_contactImported": "Contact has been imported.",
"contacts_contactImportFailed": "Failed to import contact.",
"discoveredContacts_export": "Export discovered contacts",
"discoveredContacts_import": "Import discovered contacts",
"discoveredContacts_exported": "Exported discovered contacts to {path}.",
"@discoveredContacts_exported": {
"placeholders": {
"path": {
"type": "String"
}
}
},
"discoveredContacts_exportFailed": "Failed to export discovered contacts: {error}",
"@discoveredContacts_exportFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"discoveredContacts_imported": "Imported {count} discovered contacts.",
"@discoveredContacts_imported": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"discoveredContacts_importNoContacts": "No contacts found in import file.",
"discoveredContacts_importSummary": "Imported {imported} discovered contacts. Skipped {skipped} already known and {invalid} unreadable entries.",
"@discoveredContacts_importSummary": {
"placeholders": {
"imported": {
"type": "int"
},
"skipped": {
"type": "int"
},
"invalid": {
"type": "int"
}
}
},
"discoveredContacts_importInvalidFile": "The file is not a discovered contacts export.",
"discoveredContacts_importTooLarge": "The import file is too large (maximum {maxMb} MB).",
"@discoveredContacts_importTooLarge": {
"placeholders": {
"maxMb": {
"type": "int"
}
}
},
"discoveredContacts_importFailed": "Failed to import discovered contacts: {error}",
"@discoveredContacts_importFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"contacts_zeroHopAdvert": "Zero Hop Advert",
"contacts_floodAdvert": "Flood Advert",
"contacts_copyAdvertToClipboard": "Copy Advert to Clipboard",
"contacts_addContactFromClipboard": "Add Contact from Clipboard",
"contacts_scanQrCode": "Scan QR Code",
"contacts_scanQrInstructions": "Point the camera at a MeshCore contact QR code",
"contacts_qrFromGallery": "Scan QR from Gallery",
"contacts_noQrCodeFound": "No QR code found in the selected image.",
"contacts_qrGalleryFailed": "Could not open the gallery.",
"contacts_ShareContact": "Copy contact to Clipboard",
"contacts_ShareContactZeroHop": "Share contact by advert",
"contacts_zeroHopContactAdvertSent": "Sent contact by advert.",
"contacts_zeroHopContactAdvertFailed": "Failed to send contact.",
"contacts_contactAdvertCopied": "Advert copied to Clipboard.",
"contacts_contactAdvertCopyFailed": "Copying advert to Clipboard failed.",
"notification_activityTitle": "MeshCore Activity",
"notification_lowBatteryTitle": "Low battery",
"@notification_lowBatteryTitle": {
"description": "Title of the low battery notification"
},
"notification_lowBatteryBody": "{deviceName} battery is at {percent}%",
"@notification_lowBatteryBody": {
"description": "Body of the low battery notification; deviceName is the connected radio's node name",
"placeholders": {
"deviceName": {
"type": "String"
},
"percent": {
"type": "int"
}
}
},
"notification_messagesCount": "{count} {count, plural, =1{message} other{messages}}",
"@notification_messagesCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"notification_channelMessagesCount": "{count} {count, plural, =1{channel message} other{channel messages}}",
"@notification_channelMessagesCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"notification_newNodesCount": "{count} {count, plural, =1{new node} other{new nodes}}",
"@notification_newNodesCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"notification_newTypeDiscovered": "New {contactType} discovered",
"@notification_newTypeDiscovered": {
"placeholders": {
"contactType": {
"type": "String"
}
}
},
"notification_receivedNewMessage": "Received new message",
"notification_sharedLocation": "Shared a location",
"notification_sharedLocationNamed": "Shared a location: {label}",
"@notification_sharedLocationNamed": {
"placeholders": {
"label": {
"type": "String"
}
}
},
"notification_reacted": "Reacted {emoji}",
"@notification_reacted": {
"placeholders": {
"emoji": {
"type": "String"
}
}
},
"notification_sentGif": "Sent a GIF",
"notification_sentImage": "Sent an image",
"notification_actionReply": "Reply",
"notification_actionMarkRead": "Mark as read",
"notification_actionMuteChannel": "Mute channel",
"notification_replyHint": "Message",
"notification_you": "You",
"notification_replyFailedTitle": "Reply not sent",
"notification_replyNotConnected": "Not connected to a radio. Reconnect in MeshCore Open and send your reply again.",
"notification_replyTooLong": "Your reply is too long to send from a notification. Send it from MeshCore Open instead.",
"notification_replyUnavailable": "This conversation is no longer on the connected radio.",
"notification_replySendFailed": "Your reply may not have been sent. Check in MeshCore Open and try again.",
"notification_replyAppNotRunning": "MeshCore Open isn't running. Open it and send your reply again.",
"settings_gpxExportRepeaters": "Export repeaters / room server to GPX",
"settings_gpxExportRepeatersSubtitle": "Exports repeaters / roomserver with a location to GPX file.",
"settings_gpxExportContacts": "Export companions to GPX",
"settings_gpxExportContactsSubtitle": "Exports companions with a location to GPX file.",
"settings_gpxExportAll": "Export all contacts to GPX",
"settings_gpxExportAllSubtitle": "Exports all contacts with a location to GPX file.",
"settings_gpxExportSuccess": "Successfully exported GPX file.",
"settings_gpxExportNoContacts": "No contacts to export.",
"settings_gpxExportNotAvailable": "Not supported on your device/OS",
"settings_gpxExportError": "There was an error when exporting.",
"settings_gpxExportRepeatersRoom": "Repeater & room server locations",
"settings_gpxExportChat": "Companion locations",
"settings_gpxExportAllContacts": "All contacts locations",
"settings_gpxExportShareText": "Map data exported from meshcore-open",
"settings_gpxExportShareSubject": "meshcore-open GPX map data export",
"snrIndicator_nearByRepeaters": "Nearby Repeaters",
"snrIndicator_lastSeen": "Last seen",
"snrIndicator_nearByRepeatersDescription": "Repeaters your radio heard directly, most recently heard first.",
"snrIndicator_unknownRepeater": "Unknown repeater",
"snrIndicator_unknownRepeaterHint": "This repeater isn't in your contacts yet. Its name, location and options appear once your radio receives its advert.",
"contactsSettings_title": "Contacts settings",
"contactsSettings_autoAddTitle": "Automatic Discovery",
"contactsSettings_otherTitle": "Other contact related settings",
"contactsSettings_autoAddUsersTitle": "Auto-add users",
"contactsSettings_autoAddUsersSubtitle": "Allow the companion to automatically add discovered users.",
"contactsSettings_autoAddRepeatersTitle": "Auto-add repeaters",
"contactsSettings_autoAddRepeatersSubtitle": "Allow the companion to automatically add discovered repeaters.",
"contactsSettings_autoAddRoomServersTitle": "Auto-add room servers",
"contactsSettings_autoAddRoomServersSubtitle": "Allow the companion to automatically add discovered room servers.",
"contactsSettings_autoAddSensorsTitle": "Auto-add sensors",
"contactsSettings_autoAddSensorsSubtitle": "Allow the companion to automatically add discovered sensors.",
"contactsSettings_overwriteOldestTitle": "Overwrite Oldest",
"contactsSettings_overwriteOldestSubtitle": "When the contact list is full, the oldest non-favorited contact will be replaced.",
"contactsSettings_evictDiscoveredContactsTitle": "Evict discovered contacts",
"contactsSettings_evictDiscoveredContactsSubtitle": "When enabled, the app removes the oldest discovered contacts once the discovery list reaches its limit of {limit} entries.",
"@contactsSettings_evictDiscoveredContactsSubtitle": {
"placeholders": {
"limit": {
"type": "int"
}
}
},
"discoveredContacts_Title": "Discovered Contacts",
"discoveredContacts_noMatching": "No matching contacts",
"discoveredContacts_searchHint": "Search discovered contacts",
"discoveredContacts_contactAdded": "Contact added",
"discoveredContacts_addContact": "Add Contact",
"discoveredContacts_copyContact": "Copy Contact to clipboard",
"discoveredContacts_deleteContact": "Delete Discovered Contact",
"discoveredContacts_deleteContactAll": "Delete All Discovered Contacts",
"discoveredContacts_deleteContactAllContent": "Are you sure you want to delete all discovered contacts?",
"discoveredContacts_scan": "Scan for nearby nodes",
"discoveredContacts_scanTitle": "Nearby nodes",
"discoveredContacts_scanExplanation": "Asks nodes within direct radio range to identify themselves. Repeaters and sensors answer. Room servers and companions usually don't.",
"discoveredContacts_scanning": "Scanning…",
"discoveredContacts_scanFound": "{count, plural, =1{1 node found} other{{count} nodes found}}",
"@discoveredContacts_scanFound": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"discoveredContacts_scanNoResults": "No nodes answered. Repeaters limit how often they reply, so try again in a minute.",
"discoveredContacts_scanAgain": "Scan again",
"discoveredContacts_scanFailed": "Could not send the scan request.",
"discoveredContacts_scanSignal": "Signal {snr} dB · they heard us at {remoteSnr} dB",
"@discoveredContacts_scanSignal": {
"placeholders": {
"snr": {
"type": "String"
},
"remoteSnr": {
"type": "String"
}
}
},
"discoveredContacts_scanInContacts": "Already in contacts",
"discoveredContacts_scanNameLater": "Name appears after its next advert",
"chat_sendCooldown": "Please wait a moment before sending again.",
"appSettings_jumpToOldestUnread": "Jump to oldest unread",
"appSettings_jumpToOldestUnreadSubtitle": "When opening a chat with unread messages, scroll to the first unread instead of the latest.",
"appSettings_autoFetchRepeaterSettings": "Auto-fetch repeater settings",
"appSettings_autoFetchRepeaterSettingsSubtitle": "Request every setting when opening a repeater's settings. Each one is a separate request over LoRa, so this is slow and uses airtime. When off, tap Refresh All or refresh individual sections.",
"appSettings_languageHu": "Hungarian",
"appSettings_languageJa": "Japanese",
"appSettings_languageKo": "Korean",
"radioStats_tooltip": "Radio & mesh stats",
"radioStats_screenTitle": "Radio stats",
"radioStats_sectionSignal": "Signal",
"radioStats_sectionAirtime": "Airtime",
"radioStats_notConnected": "Connect to a device to view radio statistics.",
"radioStats_firmwareTooOld": "Radio statistics require companion firmware v8 or newer.",
"radioStats_waiting": "Waiting for data…",
"radioStats_noiseFloor": "Noise floor: {noiseDbm} dBm",
"@radioStats_noiseFloor": {
"placeholders": {
"noiseDbm": {
"type": "int"
}
}
},
"radioStats_lastRssi": "Last RSSI: {rssiDbm} dBm",
"@radioStats_lastRssi": {
"placeholders": {
"rssiDbm": {
"type": "int"
}
}
},
"radioStats_lastSnr": "Last SNR: {snr} dB",
"@radioStats_lastSnr": {
"placeholders": {
"snr": {
"type": "String"
}
}
},
"radioStats_txAir": "TX airtime (total): {seconds} s",
"@radioStats_txAir": {
"placeholders": {
"seconds": {
"type": "int"
}
}
},
"radioStats_rxAir": "RX airtime (total): {seconds} s",
"@radioStats_rxAir": {
"placeholders": {
"seconds": {
"type": "int"
}
}
},
"radioStats_chartCaption": "Noise floor (dBm) over recent samples.",
"radioStats_stripNoise": "Noise floor: {noiseDbm} dBm",
"@radioStats_stripNoise": {
"placeholders": {
"noiseDbm": {
"type": "int"
}
}
},
"radioStats_stripWaiting": "Fetching radio stats…",
"radioStats_settingsTile": "Radio stats",
"radioStats_settingsSubtitle": "Noise floor, RSSI, SNR, and airtime",
"translation_title": "Translation",
"imageMessages_enableTitle": "Enable image messages",
"imageMessages_enableSubtitle": "Send images over the mesh. Requires a one-time image model download.",
"imageMessages_modelSectionTitle": "Image model",
"imageMessages_downloadModel": "Download",
"imageMessages_cancelDownload": "Cancel",
"imageMessages_removeModel": "Remove model",
"imageMessages_modelReady": "Ready",
"imageMessages_modelNotPublished": "Not published yet — this build cannot download it.",
"imageMessages_downloadFailed": "The image model could not be downloaded.",
"imageMessages_autoProcessTitle": "Process images automatically",
"imageMessages_autoProcessSubtitle": "Reconstruct every image as soon as it arrives. Uses about 2 GB of memory for a second each time; leave off to reconstruct with a tap instead.",
"translation_enableTitle": "Enable translation",
"translation_enableSubtitle": "Translate incoming messages and allow pre-send translation.",
"translation_composerTitle": "Translate before sending",
"translation_composerSubtitle": "Controls the default state of the composer translation icon.",
"translation_autoIncomingTitle": "Auto-translate incoming messages",
"translation_autoIncomingSubtitle": "Translates Messages for notification and for chat or channel automatically.",
"translation_translateMessage": "Translate message",
"translation_targetLanguage": "Target language",
"translation_useAppLanguage": "Use app language",
"translation_downloadedModelLabel": "Downloaded model",
"translation_presetModelLabel": "Preset Hugging Face model",
"translation_manualUrlLabel": "Manual model URL",
"translation_downloadModel": "Download model",
"translation_downloading": "Downloading...",
"translation_working": "Working...",
"translation_stop": "Stop",
"translation_mergingChunks": "Merging downloaded chunks into final file...",
"translation_downloadedModels": "Downloaded models",
"translation_deleteModel": "Delete model",
"translation_modelDownloaded": "Translation model downloaded.",
"translation_downloadStopped": "Download stopped.",
"translation_downloadFailed": "Download failed: {error}",
"@translation_downloadFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"translation_enterUrlFirst": "Enter a model URL first.",
"scanner_linuxPairingShowPin": "Show PIN",
"scanner_linuxPairingHidePin": "Hide PIN",
"scanner_linuxPairingPinTitle": "Bluetooth Pairing PIN",
"scanner_linuxPairingPinPrompt": "Enter PIN for {deviceName} (leave blank if none).",
"@scanner_linuxPairingPinPrompt": {
"placeholders": {
"deviceName": {
"type": "String"
}
}
},
"translation_messageTranslation": "Message translation",
"translation_translateBeforeSending": "Translate before sending",
"translation_composerEnabledHint": "Messages will be translated before send.",
"translation_composerDisabledHint": "Send messages in the original typed language.",
"translation_translateTo": "Translate to {language}",
"@translation_translateTo": {
"placeholders": {
"language": {
"type": "String"
}
}
},
"translation_translationOptions": "Translation options",
"translation_systemLanguage": "System language",
"background_serviceTitle": "MeshCore running",
"background_serviceText": "Keeping BLE connected",
"appSettings_translationModelDeleted": "Deleted {name}",
"@appSettings_translationModelDeleted": {
"placeholders": {
"name": {
"type": "String"
}
}
},
"appSettings_translationModelDeleteFailed": "Failed to delete: {error}",
"@appSettings_translationModelDeleteFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"channels_channelUpdateFailed": "Failed to update channel: {error}",
"@channels_channelUpdateFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"contact_typeChat": "Chat",
"contact_typeRepeater": "Repeater",
"contact_typeRoom": "Room",
"contact_typeSensor": "Sensor",
"contact_typeUnknown": "Unknown",
"map_zoomIn": "Zoom in",
"map_zoomOut": "Zoom out",
"map_centerMap": "Center map",
"chrome_bluetoothRequiresChromium": "Web Bluetooth requires a Chromium browser",
"channels_communityShortId": "ID: {id}...",
"@channels_communityShortId": {
"placeholders": {
"id": {
"type": "String"
}
}
},
"pathTrace_legendGpsConfirmed": "GPS confirmed",
"pathTrace_legendInferred": "Inferred position",
"pathMap_viewSingle": "Single",
"pathMap_viewCombined": "Combined",
"pathMap_play": "Play",
"pathMap_pause": "Pause",
"pathMap_replay": "Replay",
"pathMap_stepBack": "Previous hop",
"pathMap_stepForward": "Next hop",
"pathMap_animationOn": "Show packet animation",
"pathMap_animationOff": "Hide packet animation",
"pathMap_hopOf": "Hop {current} of {total}",
"@pathMap_hopOf": {
"placeholders": {
"current": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"pathMap_observedPaths": "Observed paths: {count}",
"@pathMap_observedPaths": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"pathMap_primary": "Primary",
"pathMap_alternate": "Alt {index}",
"@pathMap_alternate": {
"placeholders": {
"index": {
"type": "int"
}
}
},
"pathMap_hopCount": "{count, plural, =1{1 hop} other{{count} hops}}",
"@pathMap_hopCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"pathMap_gpsCount": "{confirmed}/{total} GPS",
"@pathMap_gpsCount": {
"placeholders": {
"confirmed": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"pathMap_legendShared": "Shared segment",
"pathMap_legendEstimated": "Estimated segment",
"pathMap_sharedNodeCount": "Used by {count} paths",
"@pathMap_sharedNodeCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"pathMap_partialAnimation": "{count, plural, =1{1 hop has no location — the shown path is partial} other{{count} hops have no location — the shown path is partial}}",
"@pathMap_partialAnimation": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"pathMap_showAllPaths": "Show all",
"pathMap_hidePath": "Hide path",
"pathMap_showPath": "Show path",
"pathMap_collapsePanel": "Collapse panel",
"pathMap_expandPanel": "Expand panel",
"pathMap_noLocation": "No location",
"pathMap_followPacket": "Lock view to packet",
"pathMap_unfollowPacket": "Unlock view from packet",
"imageSend_title": "Send image",
"imageSend_cropNote": "Resized to 512 × 512 · aspect ratio not preserved",
"imageSend_lossyNote": "Compressed to about {bytes} bytes. The receiver's model reconstructs it, so details will differ.",
"@imageSend_lossyNote": {
"placeholders": {
"bytes": {
"type": "int"
}
}
},
"imageSend_viewOriginal": "Original",
"imageSend_viewReconstruction": "What recipients see",
"imageSend_reconstructionUnavailable": "This device can't preview the reconstruction.",
"imageSend_modelNotDownloaded": "The image model isn't downloaded yet. Download it in Settings to send images.",
"imageSend_originalSize": "Original",
"imageSend_onAirSize": "On air",
"imageSend_quality": "Quality",
"imageSend_qualityStandard": "Standard",
"imageSend_qualityHigh": "High",
"imageSend_packetsLabel": "Packets",
"imageSend_airtimeLabel": "Time on air",
"imageSend_sizeLabel": "Payload",
"imageSend_packetsCount": "{count} {count, plural, =1{packet} other{packets}}",
"@imageSend_packetsCount": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"imageSend_range": "{min}–{max}",
"@imageSend_range": {
"placeholders": {
"min": {
"type": "String"
},
"max": {
"type": "String"
}
}
},
"imageSend_unknownValue": "—",
"imageSend_radioUnknownTitle": "Radio settings unknown",
"imageSend_radioUnknownBody": "Connect to a device so the time on air can be calculated.",
"imageSend_longSendTitle": "Long transmission",
"imageSend_longSendBody": "This will hold the channel for about {duration}.",
"@imageSend_longSendBody": {
"placeholders": {
"duration": {
"type": "String"
}
}
},
"imageSend_floodNote": "Flood routing: every repeater in range retransmits each packet, so the channel stays busy longer than this.",
"imageSend_parityTitle": "Add recovery packet",
"imageSend_paritySubtitle": "One extra packet. Group messages are not acknowledged, so this lets the receiver rebuild the image if a single packet is lost.",
"imageSend_send": "Send",
"imageSend_cancel": "Cancel",
"imageSend_encodeFailed": "This image could not be encoded.",
"imageSend_codecDownloading": "The image model is still downloading.",
"imageSend_codecUnavailable": "Image sending is not available on this device.",
"imageSend_codecDisabled": "Image messages are turned off in settings.",
"imageSend_deviceUnsupported": "This radio cannot send image packets. Connect a device running companion firmware 13 or newer.",
"imageSend_directMessagesUnsupported": "Images travel as group data, so they can only be sent to a channel — not in a direct message.",
"imageSend_tooLarge": "That image encoded to more packets than the mesh format allows.",
"imageSend_sentConfirmation": "Image sent as {count} {count, plural, =1{packet} other{packets}}.",
"@imageSend_sentConfirmation": {
"placeholders": {
"count": {
"type": "int"
}
}
},
"imageSend_sendFailed": "The image could not be sent: {error}",
"@imageSend_sendFailed": {
"placeholders": {
"error": {
"type": "String"
}
}
},
"imageSend_sendingProgress": "Sending image — packet {sent} of {total}",
"@imageSend_sendingProgress": {
"placeholders": {
"sent": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"receivedImage_senderPrefix": "Node {prefix}",
"@receivedImage_senderPrefix": {
"placeholders": {
"prefix": {
"type": "String"
}
}
},
"receivedImage_incoming": "{received} of {total} packets",
"@receivedImage_incoming": {
"placeholders": {
"received": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"receivedImage_queued": "Waiting to decode",
"receivedImage_tapToDecode": "Tap to decode",
"receivedImage_decoding": "Reconstructing… about 1 s",
"receivedImage_incomplete": "Image incomplete — {received} of {total} packets arrived",
"@receivedImage_incomplete": {
"placeholders": {
"received": {
"type": "int"
},
"total": {
"type": "int"
}
}
},
"receivedImage_corrupt": "Image could not be reconstructed",
"receivedImage_decoderMissing": "Image received — image decoding is off",
"receivedImage_evicted": "Image no longer stored",
"receivedImage_retry": "Try again",
"receivedImage_decodeAgain": "Decode again",
"receivedImage_openSettings": "Set up",
"receivedImage_tapToProcess": "Tap to process",
"receivedImage_save": "Save image",
"receivedImage_shareCaption": "AI-reconstructed from {bytes} bytes; fine detail is generated, not transmitted.",
"@receivedImage_shareCaption": {
"placeholders": {
"bytes": {
"type": "int"
}
}
},
"receivedImage_packetInfo": "Packet info",
"receivedImage_parityRecovered": "One packet was rebuilt from the recovery packet.",
"receivedImage_decodeTime": "Reconstructed in {ms} ms",
"@receivedImage_decodeTime": {
"placeholders": {
"ms": {
"type": "int"
}
}
},
"receivedImage_saveFailed": "Couldn't save the image",
"receivedImage_awaiting": "{bytes} bytes · {packets} {packets, plural, =1{packet} other{packets}}",
"@receivedImage_awaiting": {
"placeholders": {
"bytes": {
"type": "int"
},
"packets": {
"type": "int"
}
}
},
"imageSend_secondsValue": "{seconds} s",
"@imageSend_secondsValue": {
"placeholders": {
"seconds": {
"type": "String"
}
}
},
"imageSend_minutesSecondsValue": "{minutes} m {seconds} s",
"@imageSend_minutesSecondsValue": {
"placeholders": {
"minutes": {
"type": "String"
},
"seconds": {
"type": "String"
}
}
},
"chat_longMessageRetryNote": "Over 158 bytes: sent at most {count} times",
"@chat_longMessageRetryNote": {
"description": "Shown under the DM composer when the message is too long for the firmware's later retry attempts",
"placeholders": {
"count": {
"type": "int"
}
}
},
"reviewMode_dialogTitle": "Enter review mode?",
"@reviewMode_dialogTitle": {"description": "Title of the review mode confirmation dialog"},
"reviewMode_dialogBody": "Review mode connects to a simulated radio with sample contacts, channels and messages. No real radio is needed.",
"@reviewMode_dialogBody": {"description": "Body of the review mode confirmation dialog"},
"reviewMode_confirm": "Enter",
"@reviewMode_confirm": {"description": "Confirm button of the review mode dialog"},
"reviewMode_cancel": "Cancel",
"@reviewMode_cancel": {"description": "Cancel button of the review mode dialog"},
"reviewMode_banner": "Review mode — simulated data",
"@reviewMode_banner": {"description": "Label of the banner shown while review mode is active"},
"reviewMode_sendTest": "Send test message",
"@reviewMode_sendTest": {"description": "Banner action that makes the simulated radio deliver a message"},
"reviewMode_testSent": "A test message will arrive shortly.",
"@reviewMode_testSent": {"description": "Snackbar shown after requesting a test message"},
"reviewMode_exit": "Exit",
"@reviewMode_exit": {"description": "Banner action that leaves review mode"},
"reviewMode_connectFailed": "Could not start review mode: {error}",
"@reviewMode_connectFailed": {"description": "Snackbar shown when review mode fails to connect", "placeholders": {"error": {"type": "String"}}},
"channels_waitForSync": "Channels are still loading from the radio. Try again when the sync finishes.",
"@channels_waitForSync": {"description": "Snackbar when the user tries to add a channel before the channel list has fully synced"},
"channels_nameTooLong": "Name is too long (max {maxBytes} bytes).",
"@channels_nameTooLong": {"description": "Snackbar when a channel name would not fit on the radio", "placeholders": {"maxBytes": {"type": "int"}}},
"repeater_valueRequired": "{field}: enter a value",
"repeater_floodMaxAdvert": "Advert flood max hops",
"repeater_floodMaxAdvertHelper": "Maximum hops a flooded advert may travel (0-64, default 8)",
"repeater_floodMaxUnscoped": "Unscoped flood max hops",
"repeater_floodMaxUnscopedHelper": "Maximum hops for floods without a region scope (0-64, default 64). A low value such as 3 keeps unscoped traffic local.",
"repeater_floodMaxUnscopedUnset": "Same as flood max",
"repeater_rxDelay": "Receive delay",
"repeater_rxDelayHelper": "Holds flood packets heard with a weak signal before forwarding, so strong-signal paths go first and fewer duplicates are sent (0-20, 0 turns it off).",
"repeater_cad": "Channel activity detection",
"repeater_cadHelper": "Listen for activity before transmitting and wait while the channel is busy. Works alongside the interference threshold.",
"repeater_adcMultiplier": "Battery voltage calibration",
"repeater_adcMultiplierHelper": "Multiplier for the battery voltage reading (0-10). 0 uses the board's default.",
"repeater_boardSupportNote": "Not every board supports this. Unsupported boards reject the change.",
"repeater_extraSf": "Extra spreading factors",
"repeater_extraSfHelper": "Up to 3 more spreading factors to listen on at the same time, separated by commas (for example 9,10). Leave empty to turn off.",
"repeater_lr2021Only": "Only for repeaters with an LR2021 radio. Other repeaters don't have this setting and reject it.",
"@repeater_valueRequired": {"description": "Save error when a changed repeater setting was left empty", "placeholders": {"field": {"type": "String"}}},
"losMapDetailTooltip": "Map detail",
"losUnitsTooltip": "Units",
"losDistance": "Distance",
"losClearance": "Clearance",
"losBlockedBy": "Blocked by",
"losObstruction": "Obstruction",
"losDistanceFromA": "{distance} from A",
"@losDistanceFromA": {"description": "Distance of the worst obstruction from point A, e.g. \"1.2 km from A\"", "placeholders": {"distance": {"type": "String"}}},
"losWorstBadge": "WORST",
"@losWorstBadge": {"description": "Badge on the worst obstruction in the list"},
"losBlockedAmount": "Blocked {amount}",
"@losBlockedAmount": {"description": "How much an obstruction blocks the beam, e.g. \"Blocked 12 m\"", "placeholders": {"amount": {"type": "String"}}},
"losFromA": "From A",
"losFromB": "From B",
"losElevation": "Elevation",
"losCenterOnMap": "Center on map",
"losStatusClear": "Clear",
"@losStatusClear": {"description": "Line-of-sight status"},
"losStatusMarginal": "Marginal",
"@losStatusMarginal": {"description": "Line-of-sight status"},
"losStatusBlocked": "Blocked",
"@losStatusBlocked": {"description": "Line-of-sight status and legend entry"},
"losStatusCheckingShort": "Checking",
"@losStatusCheckingShort": {"description": "Line-of-sight status while the check runs"},
"losStatusNoResult": "No result",
"@losStatusNoResult": {"description": "Line-of-sight status when there is no result"},
"losSelectedPill": "Selected",
"@losSelectedPill": {"description": "Label drawn on the elevation chart at the selected point"},
"gif_tapToLoad": "Tap to load GIF",
"gif_loadFailedRetry": "Can't load GIF\nTap to retry",
"qr_cameraPermissionDenied": "Camera permission denied.\nPlease enable camera access in settings.",
"qr_cameraUnsupported": "Camera not supported on this device.",
"qr_cameraStartFailed": "Failed to start camera.\n{details}",
"@qr_cameraStartFailed": {"placeholders": {"details": {"type": "String"}}},
"imageMessages_downloadFailedWithError": "The image model could not be downloaded: {error}",
"@imageMessages_downloadFailedWithError": {"placeholders": {"error": {"type": "String"}}},
"map_nodeId": "ID",
"map_markerHideHint": "Hide: hidden until you leave the map.",
"map_markerRemoveHint": "Remove: stays hidden until you restore it from the filter menu.",
"map_markerRemoved": "Marker removed",
"map_restoreRemovedMarkers": "Restore removed markers",
"map_restoreRemovedMarkersSubtitle": "{count} removed",
"@map_restoreRemovedMarkersSubtitle": {"placeholders": {"count": {"type": "int"}}},
"map_markersRestored": "Restored {count} markers",
"@map_markersRestored": {"placeholders": {"count": {"type": "int"}}},
"map_setLocationConfirmTitle": "Set as your location?",
"map_setLocationConfirmBody": "Your node will advertise this position:\n{lat}, {lon}",
"@map_setLocationConfirmBody": {"placeholders": {"lat": {"type": "String"}, "lon": {"type": "String"}}},
"map_setLocationAction": "Set location",
"map_locationSetSuccess": "Node location updated",
"map_locationSetFailed": "The device did not confirm the new location. Try again.",
"map_poiClusterTitle": "{count} markers here",
"@map_poiClusterTitle": {"placeholders": {"count": {"type": "int"}}},
"map_poiClusterSemantics": "{count} shared markers. Tap to list them.",
"@map_poiClusterSemantics": {"placeholders": {"count": {"type": "int"}}},
"map_youWithMarkers": "You and {count} markers",
"@map_youWithMarkers": {"placeholders": {"count": {"type": "int"}}},
"map_sharedMarkerSemantics": "Shared marker: {label}",
"@map_sharedMarkerSemantics": {"placeholders": {"label": {"type": "String"}}},
"map_nodeMarkerSemantics": "{name}, {type}, {status}",
"@map_nodeMarkerSemantics": {"placeholders": {"name": {"type": "String"}, "type": {"type": "String"}, "status": {"type": "String"}}},
"map_requestLocation": "Update location",
"map_locationUpdated": "Location updated",
"map_locationNotShared": "{name} replied without a location",
"@map_locationNotShared": {"placeholders": {"name": {"type": "String"}}},
"map_locationRequestFailed": "No reply from {name}",
"@map_locationRequestFailed": {"placeholders": {"name": {"type": "String"}}},
"mapCache_zoomLevel": "Zoom {zoom}",
"@mapCache_zoomLevel": {"placeholders": {"zoom": {"type": "int"}}},
"mapCache_sizeBytes": "{size} B",
"@mapCache_sizeBytes": {"placeholders": {"size": {"type": "String"}}},
"mapCache_sizeKilobytes": "{size} KB",
"@mapCache_sizeKilobytes": {"placeholders": {"size": {"type": "String"}}},
"mapCache_sizeMegabytes": "{size} MB",
"@mapCache_sizeMegabytes": {"placeholders": {"size": {"type": "String"}}},
"mapCache_sizeGigabytes": "{size} GB",
"@mapCache_sizeGigabytes": {"placeholders": {"size": {"type": "String"}}},
"mapCache_downloadCancelled": "Download cancelled. Cached {count} tiles.",
"@mapCache_downloadCancelled": {"placeholders": {"count": {"type": "int"}}},
"mapCache_tooManyTilesTitle": "Area too large",
"mapCache_tooManyTiles": "This area needs {count} tiles, more than the limit of {max}. Pick a smaller area or lower the maximum zoom.",
"@mapCache_tooManyTiles": {"placeholders": {"count": {"type": "int"}, "max": {"type": "int"}}},
"chat_clearChatConfirm": "This erases every message in this conversation from this device. It cannot be undone.",
"channels_clearChatConfirm": "This erases every message in this channel from this device, including received images. It cannot be undone.",
"channels_timeNow": "now",
"channels_timeMinutes": "{minutes}m",
"@channels_timeMinutes": {"placeholders": {"minutes": {"type": "int"}}},
"channels_timeHours": "{hours}h",
"@channels_timeHours": {"placeholders": {"hours": {"type": "int"}}},
"channels_timeDays": "{days}d",
"@channels_timeDays": {"placeholders": {"days": {"type": "int"}}},
"channels_indexChip": "CH {index}",
"@channels_indexChip": {"placeholders": {"index": {"type": "int"}}},
"reaction_unknownSender": "Unknown",
"pathMap_noSelfGpsFix": "Local node has no GPS fix",
"pathTrace_sendFailed": "Could not send the path trace: {error}",
"@pathTrace_sendFailed": {"placeholders": {"error": {"type": "String"}}},
"losErrorNoInternet": "Elevation data needs an internet connection",
"losResultStale": "Out of date: antenna height changed",
"losSnrValue": "{snr} dB",
"@losSnrValue": {"placeholders": {"snr": {"type": "String"}}},
"losFrequencyValue": "{frequency} MHz",
"@losFrequencyValue": {"placeholders": {"frequency": {"type": "String"}}},
"losKFactorValue": "k={kFactor}",
"@losKFactorValue": {"placeholders": {"kFactor": {"type": "String"}}},
"losEndpointA": "A",
"losEndpointB": "B",
"units_km": "km",
"units_mi": "mi",
"units_m": "m",
"units_ft": "ft",
"telemetry_loading": "Loading telemetry…",
"telemetry_axisValue": "X: {x}, Y: {y}, Z: {z}",
"@telemetry_axisValue": {"placeholders": {"x": {"type": "String"}, "y": {"type": "String"}, "z": {"type": "String"}}},
"telemetry_colourValue": "R: {red}, G: {green}, B: {blue}",
"@telemetry_colourValue": {"placeholders": {"red": {"type": "String"}, "green": {"type": "String"}, "blue": {"type": "String"}}},
"telemetry_altitudeValueFeet": "{feet} ft",
"@telemetry_altitudeValueFeet": {"placeholders": {"feet": {"type": "String"}}},
"telemetry_distanceValueFeet": "{feet} ft",
"@telemetry_distanceValueFeet": {"placeholders": {"feet": {"type": "String"}}},
"settings_notConnectedError": "Not connected to a radio. Connect and try again.",
"settings_requiresConnection": "Connect to a radio to use this",
"settings_txPowerInvalidRange": "Invalid TX power ({min} to {max} dBm)",
"@settings_txPowerInvalidRange": {"placeholders": {"min": {"type": "int"}, "max": {"type": "int"}}},
"settings_contactSettingsSaved": "Contact settings saved",
"settings_batteryToggleHint": "Tap to switch between percent and voltage",
"settings_publicKeyCopyHint": "Copy public key",
"settings_locationClearHelper": "Leave both fields empty to remove your location.",
"settings_locationCleared": "Location removed",
"settings_regionFetchDiscovering": "Looking for nearby repeaters…",
"settings_regionFetchProgress": "Asking repeater {current} of {total}…",
"@settings_regionFetchProgress": {"placeholders": {"current": {"type": "int"}, "total": {"type": "int"}}},
"settings_regionFetchNoRepeaters": "No repeaters are known yet. Add a repeater as a contact or wait for one to advertise, then try again.",
"settings_regionFetchNoneResponded": "No nearby repeaters answered. Move closer to a repeater and try again.",
"appSettings_sourceSummary": "{label} - {description}",
"@appSettings_sourceSummary": {"placeholders": {"label": {"type": "String"}, "description": {"type": "String"}}},
"appSettings_routingSection": "Routing",
"appSettings_imageMessagesSection": "Image messages",
"appSettings_showApiKey": "Show API key",
"appSettings_hideApiKey": "Hide API key",
"translation_defaultModelName": "Model",
"translation_downloadProgressBytes": "{fileName}: {current} MB",
"@translation_downloadProgressBytes": {"placeholders": {"fileName": {"type": "String"}, "current": {"type": "String"}}},
"translation_downloadProgressTotal": "{fileName}: {current} / {total} MB ({percent}%)",
"@translation_downloadProgressTotal": {"placeholders": {"fileName": {"type": "String"}, "current": {"type": "String"}, "total": {"type": "String"}, "percent": {"type": "String"}}},
"translation_downloadedModelDetails": "{size} MB • {source}",
"@translation_downloadedModelDetails": {"placeholders": {"size": {"type": "String"}, "source": {"type": "String"}}},
"repeater_radioDisconnected": "Radio disconnected",
"repeater_radioDisconnectedHint": "Reconnect to your radio to send commands, refresh or save changes.",
"repeater_cliSend": "Send command",
"repeater_cliCopyTranscript": "Copy transcript",
"repeater_cliShareTranscript": "Share transcript",
"repeater_cliTranscriptCopied": "Transcript copied",
"repeater_cliClearHistoryConfirm": "Clear the command history? This cannot be undone.",
"repeater_cliSearchCommands": "Search commands",
"repeater_cliNoMatchingCommands": "No matching commands",
"debugLog_clearConfirm": "Clear all log entries? This cannot be undone.",
"repeater_unsavedChangesTitle": "Unsaved changes",
"repeater_unsavedChangesMessage": "You have changes that haven't been saved to the repeater.",
"repeater_discardChanges": "Discard",
"repeater_actionSentNoReply": "{action}: command sent. The repeater does not reply to this command.",
"@repeater_actionSentNoReply": {"placeholders": {"action": {"type": "String"}}},
"repeater_invalidSettingValue": "{setting}: {value} is not valid",
"@repeater_invalidSettingValue": {"placeholders": {"setting": {"type": "String"}, "value": {"type": "String"}}},
"repeater_prvKeyLengthError": "Private key must be exactly {length} hex characters",
"@repeater_prvKeyLengthError": {"placeholders": {"length": {"type": "int"}}},
"contacts_advertFailed": "Couldn't send advertisement",
"contacts_manageGroups": "Manage groups",
"contacts_keyPrefixSemantics": "Key prefix {prefix}",
"@contacts_keyPrefixSemantics": {"placeholders": {"prefix": {"type": "String"}}},
"community_shortId": "ID: {id}…",
"@community_shortId": {"placeholders": {"id": {"type": "String"}}},
"tcpSectionTitle": "TCP / IP",
"tcpConnectedToHeader": "Connected to",
"usbChooseSerialPort": "Choose serial port",
"neighbors_durationSeconds": "{seconds}s",
"@neighbors_durationSeconds": {"placeholders": {"seconds": {"type": "String"}}},
"neighbors_durationMinutes": "{minutes}m {seconds}s",
"@neighbors_durationMinutes": {"placeholders": {"minutes": {"type": "int"}, "seconds": {"type": "String"}}},
"neighbors_durationHours": "{hours}h {minutes}m",
"@neighbors_durationHours": {"placeholders": {"hours": {"type": "int"}, "minutes": {"type": "int"}}},
"networkMap_settingsSection": "Network map",
"networkMap_uploadTitle": "Share what my radio hears",
"networkMap_uploadExplanation": "When this is on and your radio is connected, the app sends a short summary of the packets your radio hears to the MeshCore Open network map, so everyone can see which repeaters exist and how they link up. It sends each packet's type, route, hops, signal strength and size, plus repeater names and rough locations from their own adverts. It never sends message text, who is talking to whom, channel names, your contacts or your exact position: locations are rounded to about 2 km, and your app gets a new random ID every day.",
"networkMap_whatWeCollect": "What we collect",
"networkMap_promptTitle": "Help build the network map?",
"networkMap_promptBody": "MeshCore Open can share what your radio hears with the public network map at map.meshcoreopen.org, so everyone can see which repeaters exist and how they link up.\n\nIt never sends message text, who is talking to whom, channel names, your contacts or your exact position. Locations are rounded to about 2 km.",
"networkMap_promptSettingsHint": "You can change this any time in Settings → App settings → Network map.",
"networkMap_promptAccept": "Share",
"networkMap_promptDecline": "No thanks",
"networkMap_statusOff": "Off. Nothing is sent.",
"networkMap_statusWaiting": "On. Waiting for a radio connection.",
"networkMap_statusNothingSent": "On. Nothing sent yet.",
"networkMap_statusLastSent": "Last sent {time}. {count} packets today.",
"@networkMap_statusLastSent": {"placeholders": {"time": {"type": "String"}, "count": {"type": "int"}}},
"networkMap_sourceLocal": "Local",
"networkMap_sourceOnline": "Online",
"networkMap_sourceBoth": "Both",
"networkMap_sourceLocalHint": "Nodes your radio has heard",
"networkMap_sourceOnlineHint": "Repeaters from the online network map",
"networkMap_sourceBothHint": "Your radio's nodes plus the online network map",
"networkMap_zoomInHint": "Zoom in to see the online network map",
"networkMap_loadFailed": "Couldn't load the online network map",
"networkMap_inYourContacts": "In your contacts",
"networkMap_status": "Status",
"networkMap_statusActive": "Active in the last hour",
"networkMap_statusRecent": "Heard in the last day",
"networkMap_statusStale": "Not heard lately",
"networkMap_confirmed": "Confirmed",
"networkMap_singleSource": "Single source, not yet confirmed",
"networkMap_reports": "Reports",
"networkMap_locationEstimated": "Rough location, estimated from who heard it",
"networkMap_locationAdvertised": "Rough location, from its own advert",
"networkMap_heardByRadio": "Heard by your radio",
"networkMap_inYourArea": "In your area",
"networkMap_farAway": "Far away. Management won't reach it.",
"networkMap_addToContacts": "Add to contacts",
"networkMap_manage": "Manage",
"networkMap_addedToContacts": "Added to contacts",
"networkMap_addFailed": "Couldn't add to contacts",
"networkMap_unnamed": "Unnamed repeater",
"holidayGreeting_halloween": "Happy Halloween",
"@holidayGreeting_halloween": {
"description": "Holiday greeting that plays the Halloween bats animation when it appears in a chat message. Matched in every app language and ignoring case and punctuation, so translate it as people actually write the greeting. Separate alternative phrasings with |."
},
"holidayGreeting_thanksgiving": "Happy Thanksgiving",
"@holidayGreeting_thanksgiving": {
"description": "Holiday greeting that plays the Thanksgiving turkey animation when it appears in a chat message. Matched in every app language and ignoring case and punctuation, so translate it as people actually write the greeting. Separate alternative phrasings with |."
},
"holidayGreeting_christmas": "Merry Christmas|Merry Xmas|Happy Christmas",
"@holidayGreeting_christmas": {
"description": "Holiday greeting that plays the Christmas Santa animation when it appears in a chat message. Matched in every app language and ignoring case and punctuation, so translate it as people actually write the greeting. Separate alternative phrasings with |."
},
"holidayGreeting_newYear": "Happy New Year|Happy New Year's",
"@holidayGreeting_newYear": {
"description": "Holiday greeting that plays the New Year's fireworks animation when it appears in a chat message. Matched in every app language and ignoring case and punctuation, so translate it as people actually write the greeting. Separate alternative phrasings with |."
}
}