Files
meshcore-tth/.github/workflows/pub-release.yml
T
tthandClaude Opus 5.5 654d53f34c
pub-release / release (push) Successful in 26m19s
pub-release: observer variants of the nRF52 repeaters
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 23:16:35 +01:00

184 lines
8.4 KiB
YAML

# Public firmware builds of this fork -- runs only in the published repo
# (git.rfa.cz tth-pub/meshcore-tth), skipped anywhere else.
#
# Generic envs only: upstream's placeholder BLE PIN (123456) and admin
# password ("password") -- change both on the node after flashing. Nothing
# here carries a site's identity or real secrets.
#
# Defaults follow the Czech mesh (meshcore.cz wiki: nastaveni_site_meshcore_cz,
# instalace_repeateru, regiony), PUB_FLAGS below. They apply to a node with
# no saved settings (fresh, or after an erase); a reflash keeps what is set.
#
# Runs on every push to main -- the export pushes there only after an
# upstream merge (private repo, tth-upstream-sync) -- and by hand.
# Release tag tth-<sha8>, titled with the stamped version (v1.18.0-tth<sha>);
# the newest KEEP releases stay, older ones are deleted.
# nRF52: .uf2 (drag onto the bootloader drive) and .zip (DFU over BLE or
# serial); ESP32: -merged.bin (fresh install at 0x0) and .bin (update).
name: pub-release
"on":
push:
branches: [main]
workflow_dispatch:
inputs:
ref:
description: "commit to build (sha or ref)"
required: false
default: "main"
replace:
description: "replace an existing release of this commit"
required: false
default: "false"
concurrency:
group: pub-release
cancel-in-progress: false
env:
GITEA: https://git.rfa.cz
KEEP: 5
# 869.432/62.5/SF7/CR5; repeater + room server: zero-hop advert off, flood
# advert 25 h, af 9 (= 10 % duty cycle); repeater: regions cz,cs next to *.
# Path hash 2 B is this fork's default anyway. TX power stays the board's.
# FILTER_CHANNEL_PSKS = [channel_filter] in platformio.ini (#meshcore, Public,
# #test -- public keys): compiles the repeater's `filter` (deny-forward by
# sender name); inert until an operator adds a name.
PUB_FLAGS: >-
-D LORA_FREQ=869.432 -D LORA_BW=62.5 -D LORA_SF=7 -D LORA_CR=5
-D ADVERT_INTERVAL_DEFAULT=0 -D FLOOD_ADVERT_INTERVAL_DEFAULT=25
-D AIRTIME_FACTOR_DEFAULT=9.0 -D DEFAULT_REGIONS=\"cz,cs\"
-D FILTER_CHANNEL_PSKS=\"2fa78a5aef618e7c2a78f0ab5c8869b3,8b3387e9c5cdea6ac9e5edbaa115cd72,9cd8fcf22a47333b591d96a2b848b73f\"
# Observer variants of the nRF52 repeaters: BLE console (starts OFF,
# RPT_BLE_DEFAULT_OFF -- placeholder PIN), `rxlog`/`nodes` and the `pktlog`
# raw-frame ring that the repeater observer reads over BLE or USB.
# RAM 37-39 %, flash 41-58 % on these boards.
OBS_FLAGS: >-
-D BLE_PIN_CODE=123456 -D RPT_BLE_DEFAULT_OFF=1
-D MAX_HEARD_NODES=128 -D RXLOG_SIZE=512 -D PKTFEED_SIZE=64
OBS_ENVS: >-
Xiao_nrf52_repeater SenseCap_Solar_repeater RAK_4631_repeater t1000e_repeater Heltec_t114_repeater
ENVS: >-
Xiao_nrf52_repeater Xiao_nrf52_companion_radio_ble Xiao_nrf52_room_server Xiao_nrf52_sensor
SenseCap_Solar_repeater SenseCap_Solar_companion_radio_ble
RAK_4631_repeater RAK_4631_companion_radio_ble RAK_4631_room_server
t1000e_repeater t1000e_companion_radio_ble
Heltec_t114_repeater Heltec_t114_companion_radio_ble
Heltec_v3_repeater Heltec_v3_companion_radio_ble
jobs:
release:
if: github.repository == 'tth-pub/meshcore-tth'
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
with:
fetch-depth: 0
ref: ${{ github.event.inputs.ref || github.sha }}
- name: Commit and tag
id: src
run: |
set -euo pipefail
git fetch -q --tags
sha=$(git rev-parse HEAD)
echo "sha=$sha" >>"$GITHUB_OUTPUT"
echo "tag=tth-${sha:0:8}" >>"$GITHUB_OUTPUT"
git describe --tags --abbrev=0 --match '*v[0-9]*' HEAD
- name: Release exists?
env:
TOKEN: ${{ secrets.GITEA_TOKEN || github.token }}
TAG: ${{ steps.src.outputs.tag }}
REPLACE: ${{ github.event.inputs.replace }}
run: |
set -euo pipefail
api="$GITEA/api/v1/repos/$GITHUB_REPOSITORY"
auth="header = \"Authorization: token $TOKEN\""
id=$(curl -sS --config - "$api/releases/tags/$TAG" <<<"$auth" | jq -r '.id // empty')
if [ -n "$id" ]; then
if [ "$REPLACE" != "true" ]; then
echo "::error::release $TAG already exists (id $id); set replace=true to rebuild it"
exit 1
fi
curl -sSf --config - -X DELETE "$api/releases/$id" <<<"$auth"
curl -sSf --config - -X DELETE "$api/tags/$TAG" <<<"$auth" || true
echo "removed old $TAG"
fi
- name: Setup Build Environment
uses: ./.github/actions/setup-build-environment
- name: Build and package
id: build
run: |
set -euo pipefail
sha=$(git rev-parse --short=8 HEAD)
dist="$GITHUB_WORKSPACE/dist"
mkdir -p "$dist"
version=""
# build <env> <extra flags> <name suffix>; PlatformIO appends
# PLATFORMIO_BUILD_FLAGS after each env's flags: last -D wins
build() {
local env=$1 suffix=$3 b v
echo "::group::$env$suffix"
PLATFORMIO_BUILD_FLAGS="$PUB_FLAGS $2" pio run -e "$env"
b=".pio/build/$env"
if [ -f "$b/firmware.zip" ]; then # nRF52
python3 bin/uf2conv/uf2conv.py "$b/firmware.hex" -c -o "$b/firmware.uf2" -f 0xADA52840
cp "$b/firmware.uf2" "$dist/$env$suffix-$sha.uf2"
cp "$b/firmware.zip" "$dist/$env$suffix-$sha.zip"
v=$(grep -m1 -aoE 'v[0-9]+\.[0-9]+\.[0-9]+-tth[0-9a-f]+\+?' "$b/firmware.elf" || true)
case "$v" in *+) echo "::error::$env is dirty ($v)"; exit 1 ;; esac
[ -n "$version" ] || version="$v"
else # ESP32
PLATFORMIO_BUILD_FLAGS="$PUB_FLAGS $2" pio run -t mergebin -e "$env"
cp "$b/firmware.bin" "$dist/$env$suffix-$sha.bin"
cp "$b/firmware-merged.bin" "$dist/$env$suffix-$sha-merged.bin"
fi
echo "::endgroup::"
}
for env in $ENVS; do build "$env" "" ""; done
for env in $OBS_ENVS; do build "$env" "$OBS_FLAGS" "-observer"; done
cd "$dist"
sha256sum -- * >SHA256SUMS
cat SHA256SUMS
echo "version=${version:-tth-$sha}" >>"$GITHUB_OUTPUT"
- name: Release
env:
TOKEN: ${{ secrets.GITEA_TOKEN || github.token }}
SHA: ${{ steps.src.outputs.sha }}
TAG: ${{ steps.src.outputs.tag }}
VERSION: ${{ steps.build.outputs.version }}
run: |
set -euo pipefail
api="$GITEA/api/v1/repos/$GITHUB_REPOSITORY"
auth="header = \"Authorization: token $TOKEN\""
note='BLE PIN 123456 and admin password "password" are placeholders: change them after flashing.
*-observer: repeater with a BLE console (OFF after flashing: set a PIN, then send ble on) and the
rxlog / pktlog rings for the repeater observer.
Czech mesh defaults (meshcore.cz): 869.432 MHz / 62.5 kHz / SF7 / CR5; repeater: zero-hop advert off,
flood advert 25 h, af 9 (10 % duty cycle), regions cz + cs. Apply to a fresh or erased node only.'
body=$(printf '%s\n\ncommit %s, run %s\n\n%s\nWhat this fork changes against upstream: see README.md.\n' \
"$VERSION" "$SHA" "$GITHUB_RUN_NUMBER" "$note")
jq -n --arg t "$TAG" --arg c "$SHA" --arg n "$VERSION" --arg b "$body" \
'{tag_name: $t, target_commitish: $c, name: $n, body: $b}' >"$RUNNER_TEMP/rel.json"
id=$(curl -sSf --config - -X POST -H 'Content-Type: application/json' \
--data-binary "@$RUNNER_TEMP/rel.json" "$api/releases" <<<"$auth" | jq -r .id)
for f in dist/*; do
curl -sSf --config - -X POST -F "attachment=@$f" \
"$api/releases/$id/assets?name=$(basename "$f")" <<<"$auth" >/dev/null
echo "uploaded $(basename "$f")"
done
echo "released $TAG = $VERSION (id $id)"
# keep the newest $KEEP, oldest go (with their tags)
curl -sSf --config - "$api/releases?limit=50" <<<"$auth" |
jq -r --argjson k "$KEEP" 'map(select(.tag_name | startswith("tth-")))
| sort_by(.created_at) | reverse | .[$k:][] | "\(.id) \(.tag_name)"' |
while read -r old_id old_tag; do
curl -sSf --config - -X DELETE "$api/releases/$old_id" <<<"$auth"
curl -sSf --config - -X DELETE "$api/tags/$old_tag" <<<"$auth" || true
echo "pruned $old_tag"
done