From 01d66a66ce000df1f123bebdb0a01ab3004a6e77 Mon Sep 17 00:00:00 2001 From: TeTeHacko Date: Sat, 14 Nov 2026 10:49:16 +0100 Subject: [PATCH] docs/power.md: rxps failed on the live mesh (fewer packets, TX stall); tickless loop sleep measured at zero Co-Authored-By: Claude Opus 5.5 --- docs/power.md | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/docs/power.md b/docs/power.md index 428c4c37..580ef3d3 100644 --- a/docs/power.md +++ b/docs/power.md @@ -13,7 +13,7 @@ figures are. | **GPS running continuously** | **46.0 mA** (spread 43.7-47.5) | `gps duty` recovers 42-45 of it | | BLE advertising + Bluefruit's blinking LED | see below | defaults changed, LED off, 1 s interval | | `powersaving on` (MCU light sleep) | **~1 mA, not separable from zero** | keep it on (free), but it is not a lever | -| RX duty cycle (`set radio.rxps`, from EasySkyMesh) | **~2.3 mA** at `max` (XIAO, 12. 11. 2026) | opt-in, off by default: worth it on a small panel, see below | +| RX duty cycle (`set radio.rxps`, from EasySkyMesh) | **~2.3 mA** at `max` (XIAO, 12. 11. 2026) | **no** on a live node: -16 % received and a TX stall on mast-three, see below | | `radio.rxgain off` | ~0.7 mA | **no** — 1-3 dB of sensitivity is what a mast node is for | | FEM LNA control | n/a | SenseCap has no FEM, only an RXEN switch | @@ -132,6 +132,17 @@ off as well, and of the three at level 3 one was on x3, which had rxps off: the bench shows no degradation at any level. Not measured: mixed SF/preamble senders, a busy live mesh. On a mast, where 2 mA of ~24 is not the problem, leave it off. +**On the live mesh it failed (mast-three, 14. 11. 2026, `max`).** Against ob1 as +the reference for the hour-to-hour traffic, the node received ~16 % fewer +packets (2.08 vs 2.47 per ob1 packet) with ~30 % more `recv_errors`, and within +two hours of switching it on it stopped transmitting altogether: `sent` frozen, +queue full (32), no `tx_start_fail`/`tx_timeout`, RX still counting -- so no +adverts and no replies to an admin login, for 6+ hours. `radiostat` showed +`irq=0x0014` (preamble + header valid, no RX done). `set radio.rxps off` did +NOT bring TX back; a reboot did. The mechanism is not proven, and the radio +silence watchdog cannot see it (it watches RX only). Do not enable rxps on a +node that has to answer. + ## MCU sleep `powersaving on` makes the nRF52 wait in WFE between events (it wakes on any @@ -148,6 +159,11 @@ still polls the SX1262 over SPI on every pass and the SoftDevice wakes the core for each advertising event, so there is not much idle left to sleep through. Keep it on (it is free and cannot hurt), but do not budget for it. +Blocking the loop task instead of waiting for an event (so that FreeRTOS can +sleep tickless) changes nothing either: `delay(10)` against `sd_app_evt_wait()`, +XIAO x4, A/B/A/B 30 min cells (14. 11. 2026): paired difference **0.04 mA**, +cell repeatability 0.1-0.4 mA. The tick wakeups are not where the current goes. + One fork-specific fix goes with it: the sleep is also held off while the BLE console still has queued output (`bleTxPending()`), because on the observer node a half-drained `rxlog`/`pktlog` page would otherwise wait for the next