pub-release: observer variants of the nRF52 repeaters
pub-release / release (push) Successful in 26m19s

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
tthandClaude Opus 5.5 committed 2026-11-02 23:16:35 +01:00
1 parent 94a5526b66
commit 654d53f34c
2 files changed
+34 -12

No files matched your search

+25 -11
View File
@@ -49,6 +49,15 @@ env:
-D ADVERT_INTERVAL_DEFAULT=0 -D FLOOD_ADVERT_INTERVAL_DEFAULT=25
-D AIRTIME_FACTOR_DEFAULT=9.0 -D DEFAULT_REGIONS=\"cz,cs\"
-D FILTER_CHANNEL_PSKS=\"2fa78a5aef618e7c2a78f0ab5c8869b3,8b3387e9c5cdea6ac9e5edbaa115cd72,9cd8fcf22a47333b591d96a2b848b73f\"
# Observer variants of the nRF52 repeaters: BLE console (starts OFF,
# RPT_BLE_DEFAULT_OFF -- placeholder PIN), `rxlog`/`nodes` and the `pktlog`
# raw-frame ring that the repeater observer reads over BLE or USB.
# RAM 37-39 %, flash 41-58 % on these boards.
OBS_FLAGS: >-
-D BLE_PIN_CODE=123456 -D RPT_BLE_DEFAULT_OFF=1
-D MAX_HEARD_NODES=128 -D RXLOG_SIZE=512 -D PKTFEED_SIZE=64
OBS_ENVS: >-
Xiao_nrf52_repeater SenseCap_Solar_repeater RAK_4631_repeater t1000e_repeater Heltec_t114_repeater
ENVS: >-
Xiao_nrf52_repeater Xiao_nrf52_companion_radio_ble Xiao_nrf52_room_server Xiao_nrf52_sensor
SenseCap_Solar_repeater SenseCap_Solar_companion_radio_ble
@@ -105,29 +114,32 @@ jobs:
run: |
set -euo pipefail
sha=$(git rev-parse --short=8 HEAD)
# PlatformIO appends these after each env's flags: last -D wins
export PLATFORMIO_BUILD_FLAGS="$PUB_FLAGS"
dist="$GITHUB_WORKSPACE/dist"
mkdir -p "$dist"
version=""
for env in $ENVS; do
echo "::group::$env"
pio run -e "$env"
# build <env> <extra flags> <name suffix>; PlatformIO appends
# PLATFORMIO_BUILD_FLAGS after each env's flags: last -D wins
build() {
local env=$1 suffix=$3 b v
echo "::group::$env$suffix"
PLATFORMIO_BUILD_FLAGS="$PUB_FLAGS $2" pio run -e "$env"
b=".pio/build/$env"
if [ -f "$b/firmware.zip" ]; then # nRF52
python3 bin/uf2conv/uf2conv.py "$b/firmware.hex" -c -o "$b/firmware.uf2" -f 0xADA52840
cp "$b/firmware.uf2" "$dist/$env-$sha.uf2"
cp "$b/firmware.zip" "$dist/$env-$sha.zip"
cp "$b/firmware.uf2" "$dist/$env$suffix-$sha.uf2"
cp "$b/firmware.zip" "$dist/$env$suffix-$sha.zip"
v=$(grep -m1 -aoE 'v[0-9]+\.[0-9]+\.[0-9]+-tth[0-9a-f]+\+?' "$b/firmware.elf" || true)
case "$v" in *+) echo "::error::$env is dirty ($v)"; exit 1 ;; esac
[ -n "$version" ] || version="$v"
else # ESP32
pio run -t mergebin -e "$env"
cp "$b/firmware.bin" "$dist/$env-$sha.bin"
cp "$b/firmware-merged.bin" "$dist/$env-$sha-merged.bin"
PLATFORMIO_BUILD_FLAGS="$PUB_FLAGS $2" pio run -t mergebin -e "$env"
cp "$b/firmware.bin" "$dist/$env$suffix-$sha.bin"
cp "$b/firmware-merged.bin" "$dist/$env$suffix-$sha-merged.bin"
fi
echo "::endgroup::"
done
}
for env in $ENVS; do build "$env" "" ""; done
for env in $OBS_ENVS; do build "$env" "$OBS_FLAGS" "-observer"; done
cd "$dist"
sha256sum -- * >SHA256SUMS
cat SHA256SUMS
@@ -144,6 +156,8 @@ jobs:
api="$GITEA/api/v1/repos/$GITHUB_REPOSITORY"
auth="header = \"Authorization: token $TOKEN\""
note='BLE PIN 123456 and admin password "password" are placeholders: change them after flashing.
*-observer: repeater with a BLE console (OFF after flashing: set a PIN, then send ble on) and the
rxlog / pktlog rings for the repeater observer.
Czech mesh defaults (meshcore.cz): 869.432 MHz / 62.5 kHz / SF7 / CR5; repeater: zero-hop advert off,
flood advert 25 h, af 9 (10 % duty cycle), regions cz + cs. Apply to a fresh or erased node only.'
body=$(printf '%s\n\ncommit %s, run %s\n\n%s\nWhat this fork changes against upstream: see README.md.\n' \