upstream-sync-bot
fbefa417b9
Merge upstream/dev (16 commits) [upstream-sync]
pub-release / release (push) Successful in 37m31s
2026-11-14 05:06:06 +00:00
tth and Claude Opus 5.5
8d0b0dd164
Merge upstream/dev (80 commits) [upstream-sync]
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 09:22:19 +01:00
Quency-D
6ff32a57da
Merge pull request #20 from meshcore-dev/dev
...
merge Dev
2026-11-12 14:03:11 +08:00
fdlamotte
41540f1642
Merge pull request #3664 from Martin-hub1/dev
...
Add DFRobot LoRaWAN ESP32-S3 Companion BLE firmware
2026-11-10 09:06:07 -04:00
Martin-hub1
ff0ce69c16
Add DFRobot LoRaWAN ESP32-S3 Companion BLE firmware
...
Add a board variant for the DFRobot DFR1195 (ESP32-S3-WROOM-1-N4, SX1262, 80x160 ST7735S) and a Companion BLE environment. The display and radio use separate SPI controllers: the SX1262 is on FSPI and the ST7735 is on HSPI. ST7735Display selects that HSPI bus and the 160x80 init sequence only when DFROBOT_LORAWAN_ESP32S3 is defined.
2026-10-22 17:53:57 +08:00
Luca Olivieri
e296c49580
Add LilyGO T3 STM32 support
2026-10-20 19:58:14 +02:00
tth and Claude Opus 5.5
1a582db63d
nrf52: hardfault recorder v aplikaci a v .noinit ( #5 )
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-10-18 22:59:02 +02:00
tth and Claude Opus 5.5
8b55e36f95
nrf52: hodiny přežijí warm reset v .noinit ( #5 )
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-10-18 22:17:40 +02:00
tth and Claude Opus 5.5
107b37b5f4
Merge remote-tracking branch 'origin/dev' into main
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-09-23 18:35:35 +02:00
Florent
ea2d2f36ce
m4: inital port
2026-09-20 15:25:18 -04:00
c0f3bdeb60
Add Muzi Base board support (Duo + Uno + SuperIO)
...
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com >
Co-authored-by: Andy Shinn <andys@andyshinn.as >
2026-09-12 05:41:26 -07:00
tth and Claude Opus 5
bd60aa4322
Merge remote-tracking branch 'origin/dev' into main
...
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com >
2026-09-02 02:19:04 +02:00
Florent
109ed685b2
thinknode_m8: initial support
2026-08-11 17:37:35 -04:00
tth and Claude Opus 5
774676248b
Merge upstream v1.17.0 (origin/main) into the analyzer/BLE fork
...
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com >
2026-08-09 22:44:07 +02:00
tth and Claude Opus 5
bbd4fbc358
feat(clock): a node with no GPS starts at its build epoch, not in 2024
...
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com >
2026-08-09 22:24:59 +02:00
Scott Powell
49319023e5
Merge branch 'dev'
...
# Conflicts:
# docs/payloads.md
2026-08-09 14:36:53 -04:00
Hacuchino-hash
5b2613fc0a
Add support for Seeed SenseCAP MeshTracker X1 (LR2021)
2026-08-05 05:50:21 -05:00
taco
e2d050df9f
add Meshnology W12 support and LR2021 wrapper
2026-08-05 14:23:29 +10:00
Quency-D
e8ace69fc0
Add heltec-rc52 board
2026-07-22 16:33:05 +08:00
Alexander Hoffer
c7531c4502
fix: enable Heltec V4 USB serial
2026-07-20 15:47:03 +01:00
ripplebiz
c289e500d5
Merge pull request #2966 from Quency-D/heltec-rc32
...
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
ripplebiz
23c9e0cc8d
Merge pull request #2560 from Quency-D/heltec-v4-r8
...
Add heltec-v4-r8 board
2026-07-17 13:54:45 +10:00
Quency-D
87c0849a07
Merge pull request #17 from meshcore-dev/dev
...
merge Dev
2026-07-15 14:49:40 +08:00
liamcottle
4d3131deed
initial support for thinknode m9
2026-07-13 19:07:09 +12:00
Liam Cottle
e59f529ee9
Merge pull request #2839 from liamcottle/board/thinknode-m7
...
Add support for Elecrow ThinkNode M7
2026-07-13 15:06:17 +12:00
tth and Claude Opus 4.8
434e306430
feat: expose repeater text console over BLE + nRF52 SoftDevice fixes
...
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com >
2026-07-11 19:21:11 +02:00
Quency-D
0c0965ea3a
Add heltec rc32 board
2026-07-08 16:20:12 +08:00
Quency-D
0d034d4738
Merge pull request #14 from meshcore-dev/dev
...
merge Dev
2026-06-26 17:16:23 +08:00
liamcottle
b610750b24
initial support for elecrow thinknode m7
2026-06-25 16:03:27 +12:00
Quency-D
b1bcb8f0df
Merge pull request #13 from meshcore-dev/dev
...
merge Dev
2026-06-11 15:30:31 +08:00
Sefinek
fe5a7b05a1
chore: normalize board JSON line endings
2026-06-02 15:34:00 +02:00
Quency-D
7461d8ff0a
Merge pull request #11 from meshcore-dev/dev
...
merge Dev
2026-05-27 15:43:22 +08:00
taco
7503a144b3
add openocd_target to lilygo t-impulse board.json
2026-05-20 20:02:18 +10:00
Quency-D
eaee3b9581
Add heltec -v4-r8 board
2026-05-15 16:53:18 +08:00
ripplebiz
98c2981987
Merge pull request #2515 from Cisien/station-g3-esp32
...
Add support for Station G3 and its software configurable LNA/PA1
2026-05-15 13:58:42 +10:00
Quency-D
50eca5bff0
add heltec tower v2
2026-05-12 14:53:17 +08:00
Liam Cottle
e3426309e7
Merge pull request #2522 from liamcottle/board/lilygo-t-impulse-plus
...
Add support for LilyGo T-Impulse-Plus
2026-05-12 01:39:44 +12:00
liamcottle
57dad2393a
initial support for lilygo t impulse plus
2026-05-11 22:05:06 +12:00
Quency-D
e9b8926155
add heltec-mesh-node-t1
2026-05-11 15:11:07 +08:00
Chris
9078a822f7
Add support for Station G3 and its software configurable LNA and PA1
2026-05-09 13:53:20 -07:00
me
630961891d
feat(techo-lite): add Non-Shell (screenless) companion BLE variant
...
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button
2026-04-20 21:08:08 -07:00
Quency-D
5adcc9c6f0
add heltec_mesh_node_t096 board.
2026-03-20 15:56:09 +08:00
Florent Daigniere
108960f7c2
fix build
2026-03-14 18:54:27 +01:00
Wessel Nieboer
548397e61c
update PR #765
2026-03-04 03:38:35 +01:00
Wessel Nieboer
0086d7b821
Merge remote-tracking branch 'origin/dev' into fix-incorrect-ram-flash-maximums
2026-03-04 03:37:01 +01:00
Sam Koucha
006ff78cd7
Make full use of board's 8MB Flash and add companion WiFI target
2026-02-22 18:14:39 +00:00
Steven Linn
2d1871be0b
Add LilyGO T-Beam 1W Support
2026-01-28 22:24:43 -07:00
taco
2cb674af2f
support for meshtiny
2026-01-27 14:15:02 +11:00
chrisdavis2110
5c568f5362
updated variant rak3401
2026-01-17 22:54:20 -08:00
Florent
703b927d8f
Merge branch 'thinknode_m3_port' into dev
2025-12-12 17:20:06 +01:00