Commit Graph
994 Commits
Author SHA1 Message Date
tthandClaude Opus 5 0d8ca69d69 feat(repeater): report the TX-failure counters in the RF status reply
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-19 19:42:20 +02:00
tthandClaude Opus 5 e06d95ed22 fix(contacts): zero ContactInfo before a partial fill
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-19 12:27:43 +02:00
tthandClaude Opus 5 cb74cdee06 Merge upstream v1.17.1 (origin/main)
Small one after v1.17.0: 57 files, +825/-200, and it merged with no conflicts at
all. Unlike 1.17.0, the release tags sit directly on origin/main, so no
`-s ours` is needed for git describe to see the release.

What matters for our nodes:

* fix-rxgain-setting-post-agc-reset -- rx gain no longer resets after an AGC
  adjustment. The release notes ask repeater admins to verify radio.rxgain (and
  the new radio.fem.rxgain) after updating, so that goes on the post-flash list.
* NRF52 CC310 crypto is initialised once instead of on every call, and several
  NRF52 pin maps were corrected.
* New 'get/set radio.fem.rxgain/txgain' CLI commands (companion cannot configure
  them yet).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-15 14:13:50 +02:00
Scott Powell cad602e416 * version 1.17.1 2026-08-14 22:19:19 +10:00
Scott Powell 5ff2d7109b * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
ripplebiz f8832af086 Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
agessaman f82950f311 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
tthandClaude Opus 5 10a0c7cefc Merge upstream v1.17.0 (origin/main) into the analyzer/BLE fork
Upstream shipped companion/repeater/room-server v1.17.0 today; its tree is
identical to origin/main, so that is what this merges. Our base was 7 Jul
(7b566670), i.e. 350 files / +11k lines of upstream behind.

Conflicts and how they were settled:

* Mesh.cpp -- upstream split the dedup into wasSeen() + explicit markSeen().
  Kept BOTH: their new call pair AND our payload-length bound on the TRACE
  path-hash read, which is what stops a crafted short TRACE from steering
  isHashMatch() past the buffer.
* companion_radio/main.cpp -- upstream grew its own MultiSerialInterface
  (BLE + USB + WiFi + Ethernet registered side by side), which is a superset
  of the SerialDualInterface we backported from PR #1779. Took theirs whole;
  our copy is now dead code. NOTE: envs that relied on the backport for a USB
  console alongside BLE now need an explicit -D ENABLE_USB_INTERFACE.
* ui-new/UITask.cpp -- isSerialEnabled() was renamed isBluetoothEnabled()
  upstream and DisplayDriver::RED became UIColor::warning_txt. Same intent
  either way: no BT pin on screen while Bluetooth is off.
* EnvironmentSensorManager.cpp -- upstream fixed the millis() wrap on the GPS
  update timer in the exact line our gpsDutyLoop() call sits on. Kept both,
  with their wrap-safe compare.
* NRF52Board.cpp -- upstream independently arrived at the same sd_temp_get()
  fix for SoftDevice-protected TEMP. Took their form, kept our comment, which
  is the only place recording WHY (APP_MEMACC fault -> reboot on telemetry).
* RadioLibWrappers.{h,cpp}, simple_repeater/main.cpp -- add/add. Their
  configSideDetectors()/performChannelScan()/external watchdog next to our
  irqDoneMask()/probeDio1()/BLE pump/WDT feed. The repeater console keeps the
  1032-byte reply buffer for paged analyzer output and now clears it, since a
  static buffer would otherwise reprint the previous reply.
* .vscode/extensions.json -- deleted upstream, and it is in .gitignore; our
  only change was a comment. Gone.

Built clean: Xiao_x1_rpt, Xiao_x2_cmp, Xiao_x3_obs, SenseCap_s1_rpt,
T1000E_cmp_cz. Not flashed to anything yet.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-09 22:44:07 +02:00
tthandClaude Opus 5 bbd4fbc358 feat(clock): a node with no GPS starts at its build epoch, not in 2024
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-09 22:24:59 +02:00
Scott Powell 49319023e5 Merge branch 'dev'
# Conflicts:
#	docs/payloads.md
2026-08-09 14:36:53 -04:00
Scott Powell 68dedd3e96 * version 1.17.0 2026-08-09 15:14:46 +10:00
Hacuchino-hash 4160dfbb87 Fix X1 charge status LED always showing charged 2026-08-07 08:08:08 -05:00
tthandClaude Opus 5 df66bc8711 fix(bot): size !link's reply for the longest PATH, not the longest command
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-07 11:11:25 +02:00
ripplebiz 3bfca7b79d Merge pull request #3122 from Hacuchino-hash/x1-notifications
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-07 15:26:33 +10:00
agessaman 2eb7feffe0 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
Hacuchino-hash dc8e2d6745 Add SPA06 barometer telemetry and charge status LED for MeshTracker X1 2026-08-06 07:27:05 -05:00
Hacuchino-hash f8ea866b1f Add RGB LED and haptic notifications for SenseCAP MeshTracker X1 2026-08-06 07:27:05 -05:00
liamcottle 3da5f1d4c5 disable cad on companion until it's configurable 2026-08-07 00:19:18 +12:00
tthandClaude Opus 5 1362b8a1f4 feat(power): stop paying for a blinking LED and 6.5 Hz advertising
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-06 10:05:56 +02:00
tthandClaude Opus 5 5486cc5439 feat(gps): duty-cycle the receiver, for nodes that run GPS only for the clock
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-06 10:05:26 +02:00
ripplebiz 8bf182fb41 Merge pull request #3115 from oltaco/meshnology_w12
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco cb7b158931 LR2021: auto-LDRO for side detectors 2026-08-05 14:23:32 +10:00
taco 5687ba3f87 LR2021 multi-SF support (side detectors) 2026-08-05 14:23:32 +10:00
tthandClaude Opus 5 4d96ff9e2f docs: correct the USB-vanish diagnosis, and write down what was measured
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 22:59:03 +02:00
tthandClaude Opus 5 b022b022f9 fix(repeater/dfu): drop D+ before the reset, and print RESETREAS at boot
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 22:38:47 +02:00
tthandClaude Opus 5 82cbe85864 feat(radio): DIO1-less operation + pin diagnostics, to salvage bench-board
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 21:32:58 +02:00
tthandClaude Opus 5 e6e9fd427b fix(repeater/bot): cooldown per sender, not per channel
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 20:03:41 +02:00
tthandClaude Opus 5 8b90582870 feat(repeater/bot): !link, and move the path question to the node that can answer it
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 19:45:15 +02:00
tthandClaude Opus 5 2603053779 feat(repeater/bot): sender ignore list + command whitelist so two bots share one channel
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 19:26:03 +02:00
tthandClaude Opus 5 be074b3bda feat(repeater): channel bot in the analyzer build -- listens and answers without repeating
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-04 18:30:47 +02:00
tthandClaude Opus 5 da36e0503e fix(repeater): advertise the node's real name over BLE; harden the UF2 flasher
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 13:48:07 +02:00
tthandClaude Opus 5 8dc4448e89 feat(repeater): dfu [uf2|serial|ota] — deterministic reboot into the bootloader
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 12:53:20 +02:00
tthandClaude Opus 5 50b94bdb21 feat(repeater): blink on|off, txpwr with RadioLib's verdict; UF2 flash helper
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 12:45:28 +02:00
tthandClaude Opus 5 614f9f4941 feat(repeater): blink [n] — ask a board to identify itself
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 12:20:28 +02:00
ViezeVingertjes 4820f0916d Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing
# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
2026-08-04 11:49:58 +02:00
tthandClaude Opus 5 4ad170c03e fix(companion): bound the build-date copy; fit the version stamp in the frame
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 11:43:53 +02:00
ViezeVingertjes 34156ddb11 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00
tthandClaude Opus 5 c6467a2451 fix(tools/ble_dfu): require the target address; feat: ble_cli.py; feat: silent-by-default repeater
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-03 21:46:23 +02:00
tthandClaude Opus 5 a7674c6327 feat(mesh): default to 2-byte path hashes (PATH_HASH_MODE_DEFAULT)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-03 19:12:15 +02:00
tthandClaude Opus 5 5c6dc91714 feat(repeater/ble): runtime conn TX power (blepwr) + negotiated params (bleconn)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-03 19:12:04 +02:00
Scott Powell c63f7d77f7 * bounds check added for anon_req reply_path_len 2026-08-04 01:00:31 +10:00
ripplebiz c5e44928eb Merge pull request #2688 from Che177/feature/room-server-system-posts
room_server: add room.post command for server-originated posts
2026-07-30 13:08:18 +10:00
Che177 8762862522 room_server: use standard mesh debug logging 2026-07-28 21:57:42 -07:00
Che177 b9918e6037 room_server: add room.post system posts 2026-07-27 19:50:13 -07:00
liamcottle b1218c1dbe fix bluetooth toggle on ui tiny 2026-07-28 03:50:08 +12:00
liamcottle bd83d290da refactor rak13800 to new ethernet interface class 2026-07-28 03:18:54 +12:00
liamcottle 6a785759d3 refactored companion interfaces to allow for multiple active connection modes 2026-07-28 03:18:54 +12:00
liamcottle a20eb51124 rename class 2026-07-28 03:18:54 +12:00
liamcottle 1c7a4b307f initial ch390 ethernet support for thinknode m7 companion 2026-07-28 03:18:54 +12:00