Commit Graph
1004 Commits
Author SHA1 Message Date
tthandClaude Opus 5 50b94bdb21 feat(repeater): blink on|off, txpwr with RadioLib's verdict; UF2 flash helper
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-04 12:45:28 +02:00
tthandClaude Fable 5 75b4434d61 fix(mesh/tx): requeue failed transmits with backoff instead of dropping
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-21 13:43:34 +02:00
tthandClaude Opus 4.8 9307940d04 feat(core): capture per-packet RSSI at RX (Packet::_rssi)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-12 00:19:20 +02:00
tthandClaude Opus 4.8 1ca85f8071 fix(sensor read): full node telemetry + per-channel decode
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 20:09:35 +02:00
tthandClaude Opus 4.8 434e306430 feat: expose repeater text console over BLE + nRF52 SoftDevice fixes
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 19:21:11 +02:00
tthandClaude Opus 4.8 dcd18c4384 feat: dual BLE/USB serial interface + dock-quiet BLE
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 19:21:11 +02:00
tthandClaude Opus 4.8 16f5c2889d harden: gate key-export/PIN over unauthenticated USB companion
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 19:21:11 +02:00
tthandClaude Opus 4.8 b4212ab6fc CLI: bound command copies + add 'sensor read' telemetry command
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 19:21:11 +02:00
tthandClaude Opus 4.8 da49f31d1b harden: bounds-check radio TRACE/PATH packet parsing
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-11 19:21:11 +02:00
Scott Powell f7f8a331cd Merge branch 'dev'
# Conflicts:
#	docs/faq.md
2026-06-06 21:12:43 +10:00
Scott Powell d66597c3e7 * new CLI config: flood.max.advert (default 16) 2026-06-06 13:09:24 +10:00
Liam Cottle 8f6fce5a3d Merge pull request #2463 from NoodlesNZ/fix-stddef
Add stddef.h to fix compilation issue on MacOS
2026-06-05 11:29:44 +12:00
Liam Cottle cfe27b3a6f Merge pull request #2672 from meshcore-dev/non-contact-requests
Non contact requests
2026-06-04 16:05:47 +12:00
Liam Cottle 1ca66e4cd4 Merge pull request #2671 from sefinek/fix/typos-grammar-formatting
Fix typos and formatting in documentation and comments
2026-06-04 15:57:48 +12:00
ripplebiz 3c9b234c73 Merge pull request #2663 from oltaco/no-autoshutdown-when-powered
Disable auto-shutdown when externally powered, add auto-shutdown warning for OLED displays
2026-06-04 13:42:00 +10:00
Scott Powell 60fa9ff18f * powersaving on/off lowercase fix 2026-06-04 13:36:18 +10:00
ripplebiz cb497c50c2 Merge pull request #1687 from IoTThinks/MCdev-PowerSaving-for-all-esp32-repeaters-202602
Added PowerSaving for all ESP32-based repeaters
2026-06-04 13:31:51 +10:00
Liam Cottle 41b89084ba Merge pull request #2022 from weebl2000/adjust-max-framesize
Increase MAX_FRAME_SIZE by 4 bytes
2026-06-03 19:58:01 +12:00
Kevin Le c972871508 Added "override" to getIRQGpio() for ESP32Board.h 2026-06-03 14:10:28 +07:00
Sefinek 4ace26210c docs: fix typos, grammar, and formatting in FAQ and code comments 2026-06-02 22:12:18 +02:00
taco 6990bca252 add bool isEink() for eink display drivers 2026-06-02 18:36:07 +10:00
Scott Powell 3a707fad43 * simplified the new flood.max.unscoped pref 2026-06-02 14:15:33 +10:00
Chris Barker a7bb4bef76 Feat: Adds flood.max.unscoped setting
Before this commit, there was no way to set a different max hop count
for unscoped messages.

Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
2026-06-01 21:30:17 +01:00
taco 651831dca8 NRF52Board: ungate isExternalPowered() 2026-06-02 00:53:00 +10:00
Scott Powell e0b87d5ed3 * contacts sync fix
* fix for reusing transient/anon contacts only
2026-06-01 19:04:42 +10:00
Scott Powell 26ce9cf733 * first draft 2026-06-01 16:49:31 +10:00
ripplebiz 633046c106 Merge pull request #2634 from NickDunklee/bme680-fixes-consolidation
feat: Integrate BME680 Bosch BSEC support for RAK4631
2026-06-01 13:35:32 +10:00
Nick Dunklee b5cb2a7e61 8 hour save window, LP, 28 day calibration window 2026-05-28 18:35:22 -06:00
Kevin Le e9d4cd8f53 Reduced time drift from 60s/day to 7s/day for ESP32-based repeaters with power saving. 2026-05-28 15:13:14 +07:00
Kevin Le eccae0f614 Fixed Interrupt WDT Reset 2026-05-28 15:13:14 +07:00
Kevin Le e4e93091df Gave MCU to OTA to run in inhibit_sleep 2026-05-28 15:13:14 +07:00
Kevin Le 55a025f159 Moved LoRa GPIOs to platformio.ini for TBeam boards 2026-05-28 15:13:14 +07:00
Kevin Le 6c250414c6 Added getIRQGpio to return DIO1 (SX1262) and DIO0 (SX127x) 2026-05-28 15:13:10 +07:00
Kevin Le a50a5c500b Supported sleep for all ESP32-based repeaters 2026-05-28 15:10:36 +07:00
Kevin Le afbf6c302e Added detailed response for powersaving CLI 2026-05-28 15:10:36 +07:00
Nick Dunklee 24d2815c9c Am idiot, and deleted some of the adafruit code path
I put it back and test-compiled a few builds.
2026-05-27 16:28:15 -06:00
Nick Dunklee a54b11dd50 feat: Integrate BME680 Bosch BSEC support for RAK4631
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.

*Background on change:*

This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.

This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!

RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)

Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.

At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.

This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so
the adafruit path also can at least show accurate values instead
of looping negative.

Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps.

*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
  reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
  flash; written only when iaqAccuracy improves to >= 2, should
  keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
  for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
  mismatch in Bosch's PlatformIO packaging, silly Bosch

One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.

This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.

This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.

*Tests:*

- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
2026-05-27 15:33:48 -06:00
Wessel Nieboer 22510ab8cf Increase MAX_FRAME_SIZE by 4 bytes
It's the safest fix for now to fix region scoped messages from being
dropped early
2026-05-26 11:51:14 +02:00
AtlavoxDev 6a3db76e27 Rename bootComplete() to onBootComplete() for naming consistency
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
AtlavoxDev bb8e40ff22 Add MainBoard::bootComplete() hook for boot-indicator LED feedback
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
Rafał Wojdyła 67c172b38e Respect predefined I2C addresses in EnvironmentSensorManager 2026-05-24 13:16:50 +02:00
fdlamotte 3eebda66d0 Merge pull request #2235 from jirogit/fix/lr1110-rxgain-cli-guard
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
2026-05-24 11:56:23 +02:00
ripplebiz fba9f92713 Merge pull request #2540 from agessaman/feat/regions-quick-loasd
Add bulk region hierarchy command to CLI
2026-05-23 18:37:28 +10:00
Liam Cottle 52ecab8f66 Merge pull request #2590 from jocasmark/fix/typos
Fix typos in comments and docs
2026-05-22 19:38:19 +12:00
agessaman c9b44367d6 Refactor region def with helpers, refine docs
Extract the inline cursor-walk in handleRegionCmd into file-local
helpers (skipSpaces, rtrimSpaces, takeToken, splitNameJump,
processRegionDefSegment), grouped immediately above the consumer.
Behavior is identical; addresses PR #2540 review feedback on
readability.

Tighten the region def docs: collapse five Note callouts into three
grouped paragraphs (Behavior / Existing regions / Limits), add a
case-sensitivity caveat plus an error example, note the cursor reset
between split commands, and use generic placeholder names.
2026-05-21 19:25:01 -07:00
taco 321e10147a u8g2 wrapper: allow larger font when size >= 2 2026-05-21 19:58:10 +10:00
pelgraine dade33c044 add wrapper for u8g2 display driver 2026-05-21 19:58:10 +10:00
Huw Duddy 8d80f5e622 Merge pull request #2443 from kizniche/fix-rxdelay-txdelay
Fix: Enforce upper bounds for rxdelay, txdelay, and direct.txdelay
2026-05-21 16:57:41 +10:00
Scott Powell 2877e2860d * added 6th byte to ACK, with RNG 2026-05-21 00:00:03 +10:00
Mark Jocas cacb5d8c2b Corrects typos and grammatical errors
Improves readability across documentation and inline comments by fixing common spelling mistakes and duplicate words.
2026-05-20 08:33:48 +02:00