Two RAM-only, opt-in tables fed from the normal RX path and pulled out
over the text console (serial / BLE) for a BLE bridge + map to consume.
Both are compiled out unless the build sets a non-zero size; enabled on
SenseCap_Solar_repeater_ble (-D MAX_HEARD_NODES=48 -D RXLOG_SIZE=96,
~6 KB RAM).
nodes [offset] -- registry of heard REPEATERS and ROOM SERVERS (chat
clients are deliberately skipped: personal/mobile devices, privacy).
Per node: pubkey prefix, name, type, lat/lon, last SNR/RSSI, seconds
since heard, and the path the advert arrived by. Fed from onAdvertRecv
(adverts are signature-verified upstream). -> map dots + topology
edges + link quality.
rxlog [cursor] -- circular firehose of EVERY parsed frame heard, fed
from logRx() (synchronous, so SNR/RSSI belong to that frame). Per
record: monotonic seq (paging cursor), time, packet hash, header
(route|type), SNR/RSSI, hop path. -> live traffic / analyzer view.
Both replies are paged to stay within the ~160 B console reply cap and
carry a trailer (next cursor + totals) so the bridge can drain and detect
if it fell behind the ring. Reachable over serial, the PIN-paired BLE
console and the admin mesh CLI, same as `neighbors`.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Repeater can be queried over BLE Nordic-UART (advert/neighbours/stats) without USB. Fix SoftDevice-protected TEMP peripheral access (sd_temp_get) that crashed BLE repeater telemetry, add USB-connected detection to ArduinoSerialInterface, and adjust the nRF52 ldscript/extra FS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
* ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit)
* ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits
* CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set