liquidraver
ee7aa4341c
LR's corrected calculation override (instead of SX) and minor changes according to radiolib's wiki
2025-07-04 16:40:19 +02:00
ripplebiz
22ac8e264f
Merge pull request #479 from 446564/cleanup-xio-nrf
...
cleanup xiao nrf52
2025-07-04 16:18:14 +10:00
ripplebiz
526e9b4291
Merge pull request #476 from WattleFoxxo/xiao-rp2040
...
Adds support for the XIAO-RP2040 board
2025-07-04 10:08:31 +10:00
Rob Loranger
2cfa2a7057
clean up xiao nrf52
...
move variant specific code out of src/helpers
redefine RXEN for alternate radio pinout
2025-07-03 09:18:26 -07:00
Rastislav Vysoky
1f8a6811a0
Merge branch 'ripplebiz:dev' into dev
2025-07-03 15:07:16 +02:00
Scott Powell
ee3ef99ce0
Merge branch 'LR1110-workaround' into dev
2025-07-03 19:38:20 +10:00
WattleFoxxo
83630eb87a
Add XIAO RP2040 support
2025-07-03 11:42:53 +10:00
recrof
b85afd4b4f
removed unsupported(?) readAltitude
2025-07-02 16:50:47 +02:00
recrof
2001585677
EnvironmentSensorManager: add support for SHTC3 and LPS22HB
2025-07-02 16:42:35 +02:00
ripplebiz
6a8093a57f
Merge pull request #455 from jquatier/wireless-paper
...
Initial Support for Heltec Wireless Paper
2025-07-01 15:23:58 +10:00
Scott Powell
eec347efa5
* PAYLOAD_TYPE_PATH: reserving upper 4 bits if 'extra_type' field, for future use
2025-06-30 23:18:16 +10:00
Scott Powell
c2abd3d00e
* CustomLR1110::getTimeOnAir(), copied from sx1262
2025-06-30 18:57:24 +10:00
Scott Powell
2f182a717f
Merge branch 'main' into dev
2025-06-30 17:07:01 +10:00
jankowski-t
4d7e5d96c0
Support MeshAdventurer
...
Added support for MeshAdventurer, including radio, display, button, GPS, voltage reading
2025-06-30 03:46:18 +02:00
liquidraver
f3b7eaddff
change fixed preamble to match the new 16
2025-06-29 15:17:15 +02:00
Scott Powell
90c31465b6
* Preamble now 16 (for most variants)
2025-06-29 20:03:10 +10:00
recrof
2255ece665
add support for BMP280 temperature+pressure sensor
2025-06-29 00:17:46 +02:00
JQ
a219284ee1
formatting
2025-06-27 23:30:52 -07:00
JQ
4f3016dd25
wireless paper board support
2025-06-27 22:57:49 -07:00
recrof
ca822d9be3
manual-merge tbeam conflicts
2025-06-27 15:30:01 +02:00
recrof
e27a8d49fe
sx1276 boards: migrate to std_init()
2025-06-27 15:12:48 +02:00
Florent de Lamotte
99899edc16
CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set
2025-06-27 11:11:12 +02:00
ripplebiz
0bf5a0c570
Merge pull request #447 from fdlamotte/stm32_halt_reset
...
stm32: implement halt and reset
2025-06-25 19:04:15 +10:00
Scott Powell
fb1f329976
* RAK: 'start ota' returned MAC address was reversed
2025-06-25 19:02:16 +10:00
Florent
80f8c1f623
stm32: implement halt and reset
2025-06-25 11:00:24 +02:00
Scott Powell
d65ce3dd77
* ESP32Board: added support for Neopixel TX led
2025-06-25 14:54:13 +10:00
Scott Powell
80ed214dd0
* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds
2025-06-25 14:04:29 +10:00
Florent
b68fac88dd
wio_e5_mini: led and rescue cli
2025-06-24 14:34:42 +02:00
taco
5b964e7c74
fix: revert swapped GPS pins
...
reverted GPS pin behaviour and swapped GPS pins for tbeam variants.
2025-06-24 12:39:07 +10:00
cod3doomy
4dc1a32e40
T-Beam refactor
...
There is a lot to this PR, so if there are any questions let me know.
The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions.
- Merged all T-Beam board.h files into one TBeamBoard.
- Added PMU code to identify different AXP chips.
- Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions
- Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions
- Enabled GPS on all T-Beam versions/models
- Enabled BME280 on the Supreme
I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.
2025-06-22 17:46:30 -07:00
Scott Powell
b9408b7f03
* AdvertDataParser: lat/lon can now be zeroes
2025-06-22 21:07:43 +10:00
Scott Powell
9d3ef66e10
* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)
2025-06-22 16:21:04 +10:00
JQ
c7c13f990b
increase delay slightly
2025-06-21 18:17:38 -07:00
JQ
b6e3d7f6f3
fix t114 display flicker
2025-06-21 16:13:53 -07:00
Scott Powell
62a3e5be21
* added std_init() to CustomSX1268
2025-06-21 15:27:58 +10:00
ripplebiz
398161232b
Merge pull request #432 from oltaco/CustomLLCC68-std_init
...
added CustomLLCC68::std_init()
2025-06-21 13:56:41 +10:00
ripplebiz
675815ec65
Merge pull request #430 from oltaco/gps-update-fix
...
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off
2025-06-21 13:49:07 +10:00
ripplebiz
3d2826abdc
Merge pull request #424 from 446564/fix-GH162
...
fix Heltec v2 getBattMilliVolts ADC multiplier
2025-06-21 13:42:03 +10:00
ripplebiz
06fe60927f
Merge pull request #423 from 446564/fix-GH133
...
heltec v3 update ADC multipler to fix voltage reading
2025-06-21 13:41:04 +10:00
ripplebiz
236a65a4ca
Merge pull request #420 from 446564/feat-GH142
...
return range with advert interval setting error
2025-06-21 13:40:27 +10:00
ripplebiz
640fac7027
Merge pull request #419 from 446564/feat-GH44
...
add time and date feedback to cli commands
2025-06-21 13:36:30 +10:00
taco
16d8f5483c
added std_init to CustomLLCC68.h
2025-06-21 11:03:25 +10:00
taco
1644ebc921
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off.
...
previously the location would always snap to the last heard GPS location after GPS had been on.
2025-06-21 10:09:28 +10:00
Rob Loranger
0ae74d6d73
fix Heltec v2 getBattMilliVolts
2025-06-20 15:00:46 -07:00
Rob Loranger
c24812bef1
return range with advert interval set error
...
updates both local and flood advert preference
setting errors to include the allowable range and
time units
2025-06-20 09:22:49 -07:00
Rob Loranger
2d164b9e18
add time output to both clock sync and time <epoch> cli
2025-06-20 08:40:06 -07:00
Rob Loranger
7f6dfea42c
update ADC multipler to fix voltage reading
2025-06-20 08:25:19 -07:00
Scott Powell
8c58e18466
* PicoW refactor, now using radio.std_init()
2025-06-20 16:42:49 +10:00
ripplebiz
f90dd29cb9
Merge pull request #417 from oltaco/promicro-CustomSX1262
...
refactor: promicro with CustomSX1262::std_init()
2025-06-20 13:47:40 +10:00
Scott Powell
8c00fa1f08
* refactored SensorManager::toggleGps()
2025-06-20 13:44:58 +10:00