Commit Graph
967 Commits
Author SHA1 Message Date
Scott Powell 5eaf5a86fb * initial wiring/routing of CLI commands to companion (either via app/serial interface, or remotely via txt message) 2026-08-21 20:55:57 +10:00
ripplebiz 1a8d860d8d Merge pull request #3233 from entr0p1/fix/centralise-max-clients
Fix duplicate MAX_CLIENTS definition
2026-08-20 14:09:30 +10:00
hansimgamrandClaude Opus 4.8 cdff1a5f4f Show plug at >=95% instead of exactly 100%
Boards without a charge-complete signal only infer "full" from voltage, and
a real pack rarely reads the full BATT_MAX_MILLIVOLTS (4.2V), so the plug icon
was effectively never shown. Treat "full" as a high band (>= 95%) so the plug
appears when the battery is charged rather than requiring an exact 100%.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
hansimgamrandClaude Opus 4.8 0c72b517e8 Add charging indicator to companion_radio battery icon
Show a small lightning-bolt icon to the left of the battery indicator on
the ui-new home screen while the device is externally powered, and a plug
icon once the battery reads full. The bolt/plug sits beside the battery so
the fill bar stays clean and uninterrupted. When a buzzer is present, the
mute icon shifts one slot further left so the two never overlap.

Charging state is derived from board.isExternalPowered(), so this works on
any board that reports external power (e.g. the nRF52 VBUS-detect path).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-08-19 12:44:41 -04:00
liamcottle b123971e21 fix for 3-byte paths passed to CMD_SEND_RAW_DATA 2026-08-19 18:59:24 +12:00
Huw Duddy eea89dfd1c Merge pull request #3235 from meshcore-dev/send-raw-direct-fix
Fix for CMD_SEND_RAW_DATA and multi-byte paths
2026-08-19 11:32:34 +10:00
fdlamotte ed227b9cb6 Merge pull request #3180 from fdlamotte/thinknode_m8
thinknode_m8: initial support

adds some functionalities to ui_task and epddisplay:

epd display, 
- supports screen off, and clear screen
- supports forcing full refresh every N partial refreshes (off by default, configured to 60 for M8)

ui_task
- UI_SHOW_CLOCK flag to display clock on first screen
- rotary button can act like joystick (with regards to Enter key), defaults to old config for existing nodes
- screen off on long press when using rotary button (very handy for the watch)
2026-08-18 09:33:42 -04:00
Rastislav Vysoky d1a2a0c20b repeater: set loop.detect to minimal as default for new installs 2026-08-18 14:56:58 +02:00
Scott Powell 44bbf74fbf Fix for CMD_SEND_RAW_DATA and multi-byte paths 2026-08-18 13:11:15 +10:00
Florent c54139f7db M8: preview messages up to 164 cars 2026-08-17 09:24:17 -04:00
entr0p1 11a02eeaba Duplicate MAX_CLIENTS definition
MAX_CLIENTS is defined in both src/helpers/ClientACL.h and examples/simple_repeater/MyMesh.h. Appears it was centralised in the former header file some time ago. Both are included in some places and, depending on which order they're in, either value can win.

This change drops the duplicate entry from the repeater firmware and bumps the central limit up to 32 (per the original repeater firmware value).

Changes:
- Remove MAX_CLIENTS from repeater MyMesh.h
- Increase MAX_CLIENTS limit in ClientACL.h to 32
2026-08-17 23:01:52 +10:00
Scott Powell cad602e416 * version 1.17.1 2026-08-14 22:19:19 +10:00
Scott Powell 5ff2d7109b * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
ripplebiz f8832af086 Merge pull request #3106 from ViezeVingertjes/fix/scoped-reply-routing
Fix replies dropped when flood.max.unscoped is low
2026-08-13 15:00:37 +10:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
Florent 109ed685b2 thinknode_m8: initial support 2026-08-11 17:37:35 -04:00
agessaman f82950f311 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
Scott Powell 68dedd3e96 * version 1.17.0 2026-08-09 15:14:46 +10:00
Hacuchino-hash 4160dfbb87 Fix X1 charge status LED always showing charged 2026-08-07 08:08:08 -05:00
ripplebiz 3bfca7b79d Merge pull request #3122 from Hacuchino-hash/x1-notifications
Add RGB LED and haptic notifications for SenseCAP MeshTracker X1
2026-08-07 15:26:33 +10:00
agessaman 2eb7feffe0 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
Hacuchino-hash dc8e2d6745 Add SPA06 barometer telemetry and charge status LED for MeshTracker X1 2026-08-06 07:27:05 -05:00
Hacuchino-hash f8ea866b1f Add RGB LED and haptic notifications for SenseCAP MeshTracker X1 2026-08-06 07:27:05 -05:00
liamcottle 3da5f1d4c5 disable cad on companion until it's configurable 2026-08-07 00:19:18 +12:00
ripplebiz 8bf182fb41 Merge pull request #3115 from oltaco/meshnology_w12
Add support for Meshnology W12 and LR2021 Wrapper
2026-08-05 15:04:00 +10:00
taco cb7b158931 LR2021: auto-LDRO for side detectors 2026-08-05 14:23:32 +10:00
taco 5687ba3f87 LR2021 multi-SF support (side detectors) 2026-08-05 14:23:32 +10:00
ViezeVingertjes 4820f0916d Merge remote-tracking branch 'upstream/dev' into fix/scoped-reply-routing
# Conflicts:
#	examples/simple_repeater/MyMesh.cpp
2026-08-04 11:49:58 +02:00
ViezeVingertjes 34156ddb11 Fix replies dropped when flood.max.unscoped is low 2026-08-03 22:57:12 +02:00
Scott Powell c63f7d77f7 * bounds check added for anon_req reply_path_len 2026-08-04 01:00:31 +10:00
ripplebiz c5e44928eb Merge pull request #2688 from Che177/feature/room-server-system-posts
room_server: add room.post command for server-originated posts
2026-07-30 13:08:18 +10:00
Che177 8762862522 room_server: use standard mesh debug logging 2026-07-28 21:57:42 -07:00
Che177 b9918e6037 room_server: add room.post system posts 2026-07-27 19:50:13 -07:00
liamcottle b1218c1dbe fix bluetooth toggle on ui tiny 2026-07-28 03:50:08 +12:00
liamcottle bd83d290da refactor rak13800 to new ethernet interface class 2026-07-28 03:18:54 +12:00
liamcottle 6a785759d3 refactored companion interfaces to allow for multiple active connection modes 2026-07-28 03:18:54 +12:00
liamcottle a20eb51124 rename class 2026-07-28 03:18:54 +12:00
liamcottle 1c7a4b307f initial ch390 ethernet support for thinknode m7 companion 2026-07-28 03:18:54 +12:00
ripplebiz 86cf57b4e7 Merge pull request #2982 from meshcore-dev/config-serializer
Config serializer
2026-07-27 17:58:03 +10:00
ripplebiz f2e46925e6 Merge pull request #3034 from meshcore-dev/ui-color-refactor
UI color refactor
2026-07-27 17:45:12 +10:00
Scott Powell 1d4e21c89f * T114 display fix 2026-07-24 18:35:56 +10:00
Scott Powell cfb7d156e9 Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
Liam Cottle b057f40b53 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Scott Powell 9f6ab20bbb * build fixes for old ESP32 boards 2026-07-22 19:52:23 +10:00
Scott Powell 365332205e * refactor of Color mapping in UITasks / DisplayDrivers
* color displays now with a new light theme
2026-07-22 16:03:33 +10:00
agessaman 20f7421f72 fix(room_server): support RX boosted gain
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
ViezeVingertjesandAdam Gessaman 5614deb63f fix: guard HWCDC serial config behind ARDUINO_USB_MODE
setTxTimeoutMs() and setTxBufferSize() are HWCDC-only APIs; calling
them on HardwareSerial (UART-bridge boards like T-Beam) fails to compile.

Co-Authored-By: Adam Gessaman <adam@gessaman.com>
2026-07-18 22:43:55 +02:00
ViezeVingertjes 2679fa8ebc fix: prevent ESP32 KISS modem stalls under USB backpressure
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
Scott Powell c34c368e3f * RP2040 build fixes
* new prefs file now "/prefs.json"
2026-07-18 20:12:21 +10:00
Scott Powell 10434a1cfd * added prefs initialisers to match original zeroed state 2026-07-18 19:22:53 +10:00