Commit Graph
850 Commits
Author SHA1 Message Date
Scott Powell f4d1bfea18 * repeater: new "get/set loop.detect {off | minimal | moderate | strict }" 2026-03-05 16:26:09 +11:00
Liam Cottle ec5c82d6ab Merge pull request #1490 from mesher-de/feature-0hop-cli
Add CLI-command for zerohop advert
2026-03-05 15:24:48 +13:00
Liam Cottle 8d7d34fc4b Merge pull request #1001 from kallanreed/fix_gps_debug_logging
Use correct macro for GPS logging test
2026-03-05 13:14:37 +13:00
Liam Cottle 754e2dc2c5 Merge pull request #1841 from weebl2000/nit-prefs
prefs is 5 char length :nerd:
2026-03-04 01:39:55 +13:00
ripplebiz a1e1c4655f Merge pull request #1743 from weebl2000/fixagcreset
fix agc reset on SX126x, SX1276 & LR11x0 chips
2026-03-03 22:19:34 +11:00
Liam Cottle ee2387c0ac Merge pull request #1633 from weebl2000/fix/gps-uart-power-leak
Fix GPS UART consuming +8mA when disabled (nRF52)
2026-03-03 23:26:58 +13:00
Wouter BijenandClaude Opus 4.6 d6b1cb77e5 Clarify comment wording: 1 = direct (0 hops)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-03 08:40:17 +01:00
Wouter BijenandClaude Opus 4.6 79d0623e3c Address PR review: subtract-1 encoding and clamp max_hops
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-03 08:37:22 +01:00
Wouter BijenandClaude Opus 4.6 e20b41631b Add configurable max hops filter for auto-add contacts
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-02 20:41:41 +01:00
Wessel Nieboer 7d1ddfd312 Fix GPS +8mA power leak when disabled (nRF52)
On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN.
MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3
rail) but stop() never set it back LOW, leaving the GPS module powered
even when disabled.

Assert reset pin in stop() to mirror begin(), and guard
_location->loop() behind gps_active check.

Fixes meshcore-dev/MeshCore#1628
2026-02-28 19:13:42 +01:00
Wessel Nieboer 8a2366043a fix comment, we know the band now after checking LR1110 user manual 2026-02-28 19:09:25 +01:00
Wessel Nieboer ce83dc9004 Calibrate configured frequency for AGC reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 4d2d9a55e4 Also implement LR11x10 AGC reset
Similar to SX126x but simpler.
2026-02-28 19:09:25 +01:00
Wessel Nieboer 72810274b8 make it more dry 2026-02-28 19:09:25 +01:00
Wessel Nieboer 4f625ad2e2 reset noise_floor sampling after agc reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 87e4f6784e when doing AGC reset, call Calibrate(0x7F)
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
2026-02-28 19:09:25 +01:00
Wessel Nieboer dd903eac41 fix agc reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 2f98ef7ddb prefs is 5 char length :nerd: 2026-02-28 19:07:38 +01:00
enricolorenzoni59 954a2d084b gps sync reply: fill buffer with text 2026-02-28 09:07:30 +00:00
Liam Cottle ae2d9c40cc Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin
Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4
2026-02-28 17:35:17 +13:00
Scott Powell 7d913e45f4 * bug fix: Packet::writeTo(), Packet::readFrom() 2026-02-26 15:36:21 +11:00
Scott Powell e25e0b87f9 * Packet::copyPath() fix 2026-02-25 17:10:31 +11:00
Scott Powell 0c8a5c80cf * Dispatcher bug fixes 2026-02-23 23:51:30 +11:00
Scott Powell 9f1f1bcf47 * CommonCLI: added "get/set path.hash.mode " 2026-02-23 14:25:19 +11:00
Scott Powell 8423633db3 Merge branch 'dev' into multibyte-paths 2026-02-23 13:11:36 +11:00
Daniel Novak 4997c74e73 Fix millis() wraparound in PacketQueue time comparisons
PacketQueue::countBefore() and PacketQueue::get() use unsigned
comparison (_schedule_table[j] > now) to check if a packet is
scheduled for the future. This breaks when millis() wraps around
after ~49.7 days: packets scheduled just before the wrap appear
to be in the far future and get stuck in the queue.

Use signed subtraction instead, matching the approach already used
by Dispatcher::millisHasNowPassed(). This correctly handles the
wraparound for time differences up to ~24.8 days in either
direction, well beyond the maximum queue delay of 32 seconds.
2026-02-22 18:01:55 +01:00
Scott Powell 62320b64c5 * refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
ripplebiz 1e1e57c8cd Merge pull request #1726 from weebl2000/fix-packet-pool-leak-queue-full
Fix packet pool leak when rx queue is full
2026-02-21 17:18:02 +11:00
Kevin Le fa55496ebc Avoid negative _claims 2026-02-18 22:32:01 +07:00
Kevin Le 15f25697db Fixed RefCountedDigitalPin.h to release claim correctly. Ensure no negative claims number. 2026-02-18 22:32:01 +07:00
taco 428f0e3ded add get bootloader.ver command for nrf52 2026-02-18 15:35:20 +11:00
Wessel Nieboer 0181520f4c Fix packet pool leak when rx queue is full
PacketQueue::add() silently dropped packets when the queue was at
capacity. The packet pointer was lost — never enqueued, never returned
to the unused pool. Each occurrence permanently shrank the 32-packet
pool until allocNew() returned NULL and the node went deaf. Return bool
from add() and free the packet back to the pool on failure.
2026-02-17 23:54:33 +01:00
mesher-de c14a471cab add advert.zerohop command to CLI 2026-02-17 13:56:18 +01:00
recrof 2bb616689c fix M5Stack Unit M6L build errors 2026-02-15 11:25:27 +01:00
ripplebiz 469c2e7332 Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
Wessel Nieboer 553f922d34 Fix double claim, eliminate dead code at compile time 2026-02-06 11:35:05 +01:00
Wessel Nieboer 20e71ebc53 Allow negative tx power
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
ripplebiz 38414f07de Merge pull request #1398 from Socalix/heltecv4-register1
Improve Heltec v4 RX reception with undocumented register patch
2026-02-05 19:14:18 +11:00
ripplebiz 5ebfac4982 Merge pull request #1562 from oltaco/nrf52-sleep-repeater
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz a1ddfec6e4 Merge pull request #1532 from oltaco/esp32board.h-removewifi
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
Quency-D 2c4a5df4cc Fix low power consumption issues 2026-02-02 14:19:42 +08:00
taco 8c9ce15f66 nrf52: allow repeater to sleep when idle 2026-02-01 14:51:27 +11:00
ripplebiz 0ff57a20a3 Merge pull request #1495 from oltaco/esp32-advblob-removal
Fix unlimited advert blob growth on ESP32
2026-02-01 13:37:28 +11:00
ripplebiz 3d8aee36de Merge pull request #1498 from piotrmalek/fix-env-sensor-manager
Fix incorrect INA260 address in debug message
2026-02-01 13:34:58 +11:00
ripplebiz 258060eabb Merge pull request #1512 from litruv/dev
Refactor display scaling definitions for HELTEC_VISION_MASTER_T190
2026-02-01 13:33:53 +11:00
taco cdd00716ee only store advblob when adding/updating contacts 2026-02-01 00:02:30 +11:00
taco e36ca64f00 fix: remove esp_wifi.h from esp32board.h
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
SoCalix 2475bbd2d1 Merge branch 'dev' into heltecv4-register1 2026-01-29 09:12:35 -06:00
Max Litruv Boonzaayer 6f7c74ceb5 Refactor display scaling definitions for HELTEC_VISION_MASTER_T190 2026-01-29 08:05:26 +11:00
João Brázio f5ad70559a Fix: Correct validation logic in isValidName function 2026-01-27 19:36:12 +00:00