recrof
ca822d9be3
manual-merge tbeam conflicts
2025-06-27 15:30:01 +02:00
recrof
e27a8d49fe
sx1276 boards: migrate to std_init()
2025-06-27 15:12:48 +02:00
Florent de Lamotte
99899edc16
CustomSX1262: fix typo that would prevent compile when TXEN or RXEN is not set
2025-06-27 11:11:12 +02:00
ripplebiz
0bf5a0c570
Merge pull request #447 from fdlamotte/stm32_halt_reset
...
stm32: implement halt and reset
2025-06-25 19:04:15 +10:00
Scott Powell
fb1f329976
* RAK: 'start ota' returned MAC address was reversed
2025-06-25 19:02:16 +10:00
Florent
80f8c1f623
stm32: implement halt and reset
2025-06-25 11:00:24 +02:00
Scott Powell
d65ce3dd77
* ESP32Board: added support for Neopixel TX led
2025-06-25 14:54:13 +10:00
Scott Powell
80ed214dd0
* Fix: /helpers/esp32/TBeamBoard was breaking non-TBeam builds
2025-06-25 14:04:29 +10:00
Florent
b68fac88dd
wio_e5_mini: led and rescue cli
2025-06-24 14:34:42 +02:00
taco
5b964e7c74
fix: revert swapped GPS pins
...
reverted GPS pin behaviour and swapped GPS pins for tbeam variants.
2025-06-24 12:39:07 +10:00
cod3doomy
4dc1a32e40
T-Beam refactor
...
There is a lot to this PR, so if there are any questions let me know.
The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions.
- Merged all T-Beam board.h files into one TBeamBoard.
- Added PMU code to identify different AXP chips.
- Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions
- Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions
- Enabled GPS on all T-Beam versions/models
- Enabled BME280 on the Supreme
I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.
2025-06-22 17:46:30 -07:00
Scott Powell
b9408b7f03
* AdvertDataParser: lat/lon can now be zeroes
2025-06-22 21:07:43 +10:00
Scott Powell
9d3ef66e10
* companion: new 'advert_loc_policy' pref. Defaults to ADVERT_LOC_NONE (ie. do Not share location in adverts)
2025-06-22 16:21:04 +10:00
JQ
c7c13f990b
increase delay slightly
2025-06-21 18:17:38 -07:00
JQ
b6e3d7f6f3
fix t114 display flicker
2025-06-21 16:13:53 -07:00
Scott Powell
62a3e5be21
* added std_init() to CustomSX1268
2025-06-21 15:27:58 +10:00
ripplebiz
398161232b
Merge pull request #432 from oltaco/CustomLLCC68-std_init
...
added CustomLLCC68::std_init()
2025-06-21 13:56:41 +10:00
ripplebiz
675815ec65
Merge pull request #430 from oltaco/gps-update-fix
...
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off
2025-06-21 13:49:07 +10:00
ripplebiz
3d2826abdc
Merge pull request #424 from 446564/fix-GH162
...
fix Heltec v2 getBattMilliVolts ADC multiplier
2025-06-21 13:42:03 +10:00
ripplebiz
06fe60927f
Merge pull request #423 from 446564/fix-GH133
...
heltec v3 update ADC multipler to fix voltage reading
2025-06-21 13:41:04 +10:00
ripplebiz
236a65a4ca
Merge pull request #420 from 446564/feat-GH142
...
return range with advert interval setting error
2025-06-21 13:40:27 +10:00
ripplebiz
640fac7027
Merge pull request #419 from 446564/feat-GH44
...
add time and date feedback to cli commands
2025-06-21 13:36:30 +10:00
taco
16d8f5483c
added std_init to CustomLLCC68.h
2025-06-21 11:03:25 +10:00
taco
1644ebc921
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off.
...
previously the location would always snap to the last heard GPS location after GPS had been on.
2025-06-21 10:09:28 +10:00
Rob Loranger
0ae74d6d73
fix Heltec v2 getBattMilliVolts
2025-06-20 15:00:46 -07:00
Rob Loranger
c24812bef1
return range with advert interval set error
...
updates both local and flood advert preference
setting errors to include the allowable range and
time units
2025-06-20 09:22:49 -07:00
Rob Loranger
2d164b9e18
add time output to both clock sync and time <epoch> cli
2025-06-20 08:40:06 -07:00
Rob Loranger
7f6dfea42c
update ADC multipler to fix voltage reading
2025-06-20 08:25:19 -07:00
Scott Powell
8c58e18466
* PicoW refactor, now using radio.std_init()
2025-06-20 16:42:49 +10:00
ripplebiz
f90dd29cb9
Merge pull request #417 from oltaco/promicro-CustomSX1262
...
refactor: promicro with CustomSX1262::std_init()
2025-06-20 13:47:40 +10:00
Scott Powell
8c00fa1f08
* refactored SensorManager::toggleGps()
2025-06-20 13:44:58 +10:00
ripplebiz
6746a0a057
Merge pull request #404 from fdlamotte/t1000_gps_toggle
...
Gps toggle on 4 clicks
Will merge, but I'll do a refactor of the gpsToggle()
2025-06-20 13:36:56 +10:00
taco
fa33f8fc49
refactor: promicro with CustomSX1262::std_init()
...
added check in CustomSX1262.h to support both txco and non-txco radios
switched promicro to use CustomSX1262::std_init()
2025-06-20 11:22:34 +10:00
Florent de Lamotte
e34d38d2d9
t1000e: gps toggle not using board class
2025-06-19 17:26:58 +02:00
Florent de Lamotte
f8bbcdb9e9
Apply refactoring to xiao_nrf52 and xiao_s3
2025-06-19 15:18:58 +02:00
Scott Powell
1f0688ee35
* added CustomSX1262::std_init()
...
* refactored variants to use std_init(): heltec_v3, t114, xiao_c3
2025-06-19 10:58:10 +10:00
Florent de Lamotte
568e4332b2
Gps toggle on 4 clicks
2025-06-18 11:52:16 +02:00
Scott Powell
28c0be48eb
* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH
2025-06-18 16:02:09 +10:00
Scott Powell
11fc3d992b
Merge commit '70158374ca7287db3409ab61855b78413596cd85' into dev
2025-06-18 14:59:19 +10:00
Scott Powell
042b600c46
* noise floor can now be queried even when int.thresh = 0
2025-06-18 01:27:53 +10:00
João Brázio
e5c2857d52
Update VBAT schematic
2025-06-16 21:28:59 +01:00
João Brázio
7465afb0b9
VBAT schematic
2025-06-16 19:51:53 +01:00
João Brázio
5ff75e303d
Rename LED pin
2025-06-16 02:01:16 +01:00
João Brázio
253fcba9c7
Waveshare RP2040-LoRa board support
2025-06-15 23:48:49 +01:00
Scott Powell
58426b150a
* fix for when AGC reset is disabled (interval = 0)
2025-06-13 14:25:09 +10:00
Scott Powell
b7be7f7966
* repeater and room server: new CLI setting "agc.reset.interval" (seconds)
2025-06-13 14:15:21 +10:00
JQ
b460a97abb
add TX led to thinknode M1
2025-06-09 17:35:00 -07:00
Scott Powell
f7badd2742
Merge branch 'datastore' into dev
2025-06-07 16:04:35 +10:00
liamcottle
cb6d75c5ef
fix 150mA power draw on ThinkNode M1
2025-06-06 21:55:03 +12:00
Scott Powell
6c75d64133
* companion: refactor of all filesystem access to new DataStore module
2025-06-06 15:30:35 +10:00