Commit Graph
234 Commits
Author SHA1 Message Date
Scott Powell 0812e09b40 missing board.loop() in companion, room server, kiss modem. 2026-09-22 18:01:15 +10:00
ripplebiz d1f1af18e9 Merge pull request #3431 from meshcore-dev/abstract-ui-overhaul
Abstract UI overhaul
2026-09-20 18:08:29 +10:00
Blake Latchford 6a711d0d6e Extend WiFi disconnect logging to specify reason
Today if a user builds firmware with an incorrect WiFi SSID or password,
they get a generic `WiFi disconnected.` error message.

Extend logging to descirbe the reason that WiFi was disconnected.

I gathered the updated logs for the 3 scenarios below.

```
WiFi: Attempting manual WiFi reconnect...
WiFi: WiFi disconnected (reason=ASSOC_LEAVE). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
WiFi: WiFi disconnected (reason=4WAY_HANDSHAKE_TIMEOUT). Flagging for reconnect...
```

```
WiFi: WiFi disconnected (reason=NO_AP_FOUND). Flagging for reconnect...
```

```
WiFi: WiFi connected successfully!
WiFi: Got connection
```
2026-09-17 19:39:51 -04:00
Scott Powell 083c2d6277 * MyMesh::begin() refactor, removing last display concepts 2026-09-17 14:25:41 +10:00
Scott Powell ab3cb11a18 * refactor: removed UITask dependency from MyMesh. New MyMesh::Listener interface
* UITask's are now a MyMesh task Listener
2026-09-16 21:03:44 +10:00
liamcottle bc333d89fa add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
liamcottle 85ad99599d tidy comments 2026-09-08 22:18:22 +12:00
liamcottle 5be7b3c4ba simplify and remove 2 as a wifi enabled state 2026-09-08 21:30:17 +12:00
Michael Graff 1a664ab6c6 WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID 2026-09-06 22:18:00 -05:00
Michael Graff 0bb10d3902 Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank 2026-09-06 21:56:25 -05:00
Michael Graff b0e7bc385a Fix review findings on Pico W WiFi/BLE 2026-09-06 20:43:37 -05:00
Michael Graff 5344e73dec Add BLE companion support for Pico W 2026-09-06 20:15:45 -05:00
Michael Graff 02cc250fc2 Address review findings on WiFi companion support
- scope the serial config CLI to RP2040; it was exposing the rescue CLI
  (cat/rm/erase) on every ESP32 WiFi build, which gates it behind a
  physical long-press
- bound and space out RP2040 rejoins: the core's join busy-waits, so cap
  it at 5s and retry every 30s instead of every 10s
- stamp the reconnect timer in setup(), so the first loop() doesn't tear
  down an association that is still finishing DHCP
- treat stored credentials as a pair, and pass NULL (not "") for an open
  network
- teach build_as_lib.py where SerialWifiInterface moved
2026-09-05 23:15:13 -05:00
Michael Graff 0f0c1dc75a Fix blocking WiFi connect on RP2040, log link state
arduino-pico's WiFi.begin() blocks for up to 2x its 15s timeout, which
stalled the mesh loop on every reconnect attempt; use beginNoBlock().
Log the IP when the link comes up, and the status code when retrying.
2026-09-05 23:15:13 -05:00
Michael Graff 48cc30777d Allow WiFi credentials to be set at runtime
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Michael Graff 676169b777 Add WiFi companion support for Pico W
SerialWifiInterface has no ESP32-specific code, so move it to
helpers/wifi and reuse it on RP2040. Guard the ESP32-only WiFi
event/auto-reconnect calls and poll link state on RP2040 instead.
2026-09-05 23:15:13 -05:00
liamcottle bd83d290da refactor rak13800 to new ethernet interface class 2026-07-28 03:18:54 +12:00
liamcottle 6a785759d3 refactored companion interfaces to allow for multiple active connection modes 2026-07-28 03:18:54 +12:00
liamcottle a20eb51124 rename class 2026-07-28 03:18:54 +12:00
liamcottle 1c7a4b307f initial ch390 ethernet support for thinknode m7 companion 2026-07-28 03:18:54 +12:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Ryan Gregg 7f1ecc2045 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
ripplebiz 580032b6a8 Merge pull request #2286 from IoTThinks/MCdev-PowerSaving-for-nrf52-companion-202604
Added Power Saving for NRF52 companions to have extra 30% battery life
2026-05-31 18:49:46 +10:00
AtlavoxDev 6a3db76e27 Rename bootComplete() to onBootComplete() for naming consistency
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
AtlavoxDev bb8e40ff22 Add MainBoard::bootComplete() hook for boot-indicator LED feedback
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
Kevin Le 68bdd61983 Added Power Saving for NRF52 companions 2026-05-22 10:58:17 +07:00
Ryan Gregg 4761d49449 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-05-18 20:57:28 +00:00
Quency-D 1b2faf07fc Merge branch 'dev' into solar-watchdog 2026-05-09 18:08:32 +08:00
Rococo88 49d7e91ed2 Refactor WiFi auto-reconnect to use non-blocking polling 2026-05-07 12:24:06 +02:00
Scott Powell 8903b907d1 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00
Quency-D ef83591306 Merge pull request #10 from meshcore-dev/dev
merge Dev
2026-04-27 14:48:26 +08:00
Ryan Gregg 76ad7b6731 Address PR review feedback from oltaco
- Remove extra blank line in companion_radio main.cpp before NRF52/STM32 block
- Revert unintended STM32_PLATFORM ETHERNET_ENABLED branch (no STM32 ethernet target exists, and it incorrectly included nrf52 headers)
- Drop renovate annotations from rak4631 platformio.ini (no renovate config in this repo)
2026-04-26 20:22:35 +00:00
Ryan Gregg 1fe2bb9068 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
2026-04-20 15:06:09 +00:00
Alejandro Ramirez 166a34b30a fix: apply persisted GPS enabled setting on boot for companion radio
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.

Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
2026-03-24 09:10:09 -05:00
Ryan GreggandClaude Opus 4.6 2afeb07beb Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code
The Ethernet retry loop in repeater and room server checked
hardwareStatus() and linkStatus() before calling Ethernet.begin(),
which always returned EthernetNoHardware since hardware detection
only happens during begin(). Extract shared Ethernet CLI code into
EthernetCLI.h to prevent future divergence. Also fix time_t type
mismatch in companion radio Ethernet init.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-13 10:48:42 -07:00
Ryan GreggandClaude Sonnet 4.6 062be045f3 Address PR review feedback from liamcottle (second round)
- Rename eth command to eth.status for consistency with other commands
- Rename generateDeviceMac to generateEthernetMac for clarity
- Refactor ethernet_handle_command to return false by default
- Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface)
- Boot companion radio without Ethernet on init failure (LoRa-only recovery mode)
- Remove > prompt from ethernet CLI for consistency with serial interface
- Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined
- Fix TCP socket leak when duplicate client detection fires
- Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface
- Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio)
- Clarify eth.status command is only available in repeater and room server firmware

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-11 12:43:08 -07:00
Ryan Gregg 359832ab5b Updates based on PR review feedback from liamcottle 2026-03-10 22:35:31 -07:00
Ryan GreggandClaude Opus 4.6 7dcdecbd4c Address PR review feedback for Ethernet support
- Add #pragma once to SerialEthernetInterface.h
- Rename TCP_PORT to ETH_TCP_PORT with #ifndef guard
- Fix typos: "initalizing" → "initializing"
- Fix #elif without condition → #else for STM32 block
- Replace infinite loop on ETH init failure with halt()
- Remove heartbeat Serial.print(".") output
- Remove dead beginETH() call (ETH_ENABLED, not RAK_ETH_ENABLE)
- Comment out MESH_DEBUG and ETH_DEBUG_LOGGING build flags

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-10 20:43:59 -07:00
Ryan GreggandClaude Opus 4.6 d0d415d5f6 Add native Ethernet support for RAK4631 repeater, room server, and companion
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.

- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
  and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-10 20:43:59 -07:00
Wessel Nieboer d7b406eb9a Address review comments 2026-03-04 03:13:53 +01:00
Quency-D 03fa3b767e Merge branch 'dev' into solar-watchdog 2026-02-09 10:15:50 +08:00
taco e36ca64f00 fix: remove esp_wifi.h from esp32board.h
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
Scott Powell bce64a57f9 * T1000e BLE - default node name is now the MAC address 2026-01-23 15:53:58 +11:00
Quency-D e902293246 Add an external watchdog module 2026-01-22 15:03:40 +08:00
Scott Powell 7ff483ab74 * Fix for VolatileRTCClock wrapping around to initial synced time every 49 days 2025-10-30 16:45:50 +11:00
taco 7a6ed7fe98 nrf52 targets: increase limits for contacts and channels 2025-09-06 14:15:40 +10:00
taco 5e2a9766dc support dual filsystems on nrf52
store identity and prefs in UserData and contacts, channels and adv_blobs in ExtraData
2025-09-06 14:15:40 +10:00
taco 5e69fb1c5a switch to using QSPI bus for external flash 2025-09-06 14:15:40 +10:00
taco 5b68f85506 initial commit: CustomLFS 2025-09-06 14:15:40 +10:00