Commit Graph
8 Commits
Author SHA1 Message Date
ripplebiz 17b809d62c Merge pull request #3060 from entr0p1/fix/mesh-debug-active
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
entr0p1 52fb56395d Clean up debugs left on in platform.ini files 2026-07-29 18:27:15 +10:00
liamcottle 6e815d755f usb companion firmwares now require build flag to include usb interface 2026-07-28 03:45:02 +12:00
Scott Powell 37ff90ab95 * build fixes for NullDisplayDriver 2026-07-22 18:55:59 +10:00
Naomi Smith 2221f20525 Fix GPS and LEDs on ThinkNode M3
GPS support was implemented incorrectly for the ThinkNode M3. The reset
pin was being driven when it should be left floating for this unit. The
enable pin also wasn't being picked up by `MicroNMEALocationProvider`
because of a mismatch in constant naming conventions. I did a general
cleanup of the GPS and ThinkNode M3 bring-up code so that constant names
line up and "*_ACTIVE" constants are used consistently vs hardcoding
`HIGH`/`LOW`. After making these changes, serial data immediately starts
streaming in from the NMEA on boot and GPS detection just works.

LED handling was also not quite right for the ThinkNode M3. The LoRa TX
LED was being driven high to turn it on when it should actually be
driven low. I changed the code to use the `LED_STATE_ON` constant and
also added a little code to the shutdown path to properly make sure that
all LEDs are turned off.

Tested and confirmed working on real hardware.

Resolves both #1864 and #2879.
2026-07-03 12:07:19 -07:00
Rastislav Vysoky 0a2f6b1cd9 add kiss radio env to most of the variants 2026-04-28 15:09:25 +02:00
Wessel Nieboer f7fec7cfd9 Default button polarity to active-LOW across all firmware types
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Florent 13b9d394ef thinknode_m3: initial commit 2025-12-12 17:16:28 +01:00