Commit Graph
96 Commits
Author SHA1 Message Date
Liam Cottle 7633e8a880 Merge pull request #1977 from robekl/docs/implementation-sync-release
Update docs to align with implementation
2026-03-11 18:09:16 +13:00
Robert Ekl 503f270b75 set prv.key doc update 2026-03-10 22:12:55 -05:00
Robert Ekl 03fe97b77d docs: sync companion and kiss protocol docs 2026-03-08 21:31:08 -06:00
Robert Ekl e80e72aae9 docs: sync CLI and payload docs with implementation 2026-03-08 21:31:08 -06:00
AI7NC 3cbc30a3f2 Update cli_commands.md R400 grammer
Small grammar fix
2026-03-07 11:14:03 -08:00
AI7NC 8a61051f17 Update cli_commands.md R402 2026-03-07 11:01:20 -08:00
AI7NC 71462ec422 Update cli_commands.md R399 updates 2026-03-07 10:55:40 -08:00
AI7NCandWessel 23fcb8e866 Apply suggestion from @weebl2000
Co-authored-by: Wessel <wessel@weebl.me>
2026-03-07 10:43:23 -08:00
AI7NCandWessel d0567950fb Apply suggestion from @weebl2000
Co-authored-by: Wessel <wessel@weebl.me>
2026-03-07 10:42:13 -08:00
AI7NCandWessel 3295d2ebb2 Apply suggestion from @weebl2000
Co-authored-by: Wessel <wessel@weebl.me>
2026-03-07 10:40:41 -08:00
AI7NC a4fba5a6ac Update cli_commands.md 2026-03-06 16:30:45 -08:00
AI7NC 9edef11252 Update cli_commands.md to include path.hash.mode and loop.detect
Adding the new repeater cli commands introduced in 1.14

Ref: https://buymeacoffee.com/ripplebiz/path-diagnostics-improvements
2026-03-06 15:22:00 -08:00
Scott Powell 9561779ced Merge branch 'dev'
# Conflicts:
#	docs/cli_commands.md
2026-03-06 12:21:52 +11:00
Liam Cottle f414eb5960 Merge pull request #1826 from dreirund/docs_-_fix-faq.md-bogous-last-tableofcontentsentry
docs/faq.md: Table of Contents: Remove bogous `[| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--)`
2026-02-25 15:25:26 +13:00
dreirund a2d486f84e docs/faq.md: Categorising section 5.14. "Q: Are there are projects built around MeshCore?".
In `[docs/faq.md](https://github.com/meshcore-dev/MeshCore/blob/main/docs/faq.md)`, the entries are now grouped by category.

This patch applies on top of https://github.com/meshcore-dev/MeshCore/pull/1822.
2026-02-24 18:19:50 +01:00
dreirund 54a6126c0a docs/faq.md: Table of Contents: Remove bogous [| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--).
The table of contents of `docs/faq.md` had at the end a bogous entry  
```markdown
- [| | High Output | 22 dBm | 28 dBm | |](#--high-output--22-dbm--28-dbm--)
```

This patch removes that bogous entry.
2026-02-24 17:48:30 +01:00
dreirund d626cacfea faq.md: Section 5.14: Added more external projects.
Added to section 5.14 "Are there are projects built around MeshCore?":

* awesome-meshcore
* meshcore-open
* MeshCore-Cardputer-ADV
* LunarCore
* MC-Term
* Meck
* Meshcore for Wio Tracker L1 Pro
* MeshCore map auto uploader
2026-02-24 13:26:30 +01:00
Robert Ekl 32678f85ac docs: correct CLI command forms and targeted typos 2026-02-23 18:53:20 -06:00
Jeroen Vermeulen d9f1a6fac3 Update admin password command description
Tested in v1.13.
These commands don't work anymore:
```
get password
  -> ??: password
set password secret
  -> unknown config: password secret
```
This does work:
```
password secret
  -> password now: secret
```
2026-02-20 20:48:48 +01:00
Scott Powell f03f3fc986 Merge branch 'dev' 2026-02-15 17:25:07 +11:00
Liam Cottle 5d0e84d4d9 Merge pull request #1346 from mboelen/patch-1
Update faq.md
2026-02-15 18:20:00 +13:00
liamcottle e35e6d6bcf refactor packet format docs 2026-02-12 17:12:23 +13:00
mattzzw c4113ac7e7 Merge branch 'meshcore-dev:dev' into dev 2026-02-10 22:33:43 +01:00
ViezeVingertjes 16cc9ccc9a Update protocol docs for new response codes and signal reporting 2026-02-07 10:26:08 +01:00
ViezeVingertjes 8def22d5a5 Clarify data frame limitations in KISS modem documentation. 2026-02-07 08:51:52 +01:00
ViezeVingertjes cdc25aeff4 Reorganise KISS protocol to close gaps. 2026-02-07 08:51:52 +01:00
ViezeVingertjes 59040cc5bb Update documentation. 2026-02-07 08:51:52 +01:00
ViezeVingertjes 48e60ed57f Rewrite KISS modem to be fully spec-compliant 2026-02-07 08:51:52 +01:00
Adam Gessaman c354f8202c Clean up comments on kiss noise floor changes. 2026-02-05 09:46:30 -08:00
agessaman b04321f3b8 fix(kiss): periodic noise floor calibration and AGC reset
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
  and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
Don Patterson c99302c4dd Fix URLs 2026-02-03 18:06:23 -08:00
liamcottle f127f69cb8 refactor documentation 2026-02-04 00:59:13 +13:00
ripplebiz 9c7246b664 Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
Liam Cottle e7ca089599 Merge pull request #1579 from liamcottle/docs
Add mkdocs for automated documentation site
2026-02-03 13:42:19 +13:00
Matthias Wientapper bcf5f2a4fb cli_commands.md: region available via remote cli in 1.12.0
changed with #1476
2026-01-31 23:20:56 +01:00
ViezeVingertjes b04f33bd34 Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors. 2026-01-31 15:05:25 +01:00
ViezeVingertjes a5ad202218 Add KISS Modem firmware 2026-01-31 10:22:32 +01:00
agessaman 62ec1b5f25 Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
Scott Powell 5a7c652d91 Merge branch 'dev' 2026-01-29 21:16:53 +11:00
liamcottle aac5fee796 add support for mkdocs 2026-01-28 21:48:39 +13:00
Chris d5b8d68048 Add a cli command reference document 2026-01-27 19:08:04 -08:00
entr0p1 07316891fc nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout
Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
2026-01-23 17:18:41 +11:00
Scott Powell 506c2912dc * repeater login response, FIRMWARE_VER_LEVEL now bumped to 2 2026-01-12 17:47:51 +11:00
Michael Boelen 66ffd04c57 Update faq.md
Fix of a typo, change second sentence to start with a capital (like Q 3.6), adding missing dot in 3.8, and turn 3.8 into a question.

The file on dev branch is outdated, so submitting this on main.
2026-01-08 15:20:05 +00:00
uncle lit 05a8691b1b fix Station G2 output dBm typo
fix Station G2 output dBm typo reported on https://github.com/meshcore-dev/MeshCore/issues/1304

changed 26.5 dBm to 36.5 dBm
2026-01-02 22:34:10 -08:00
Scott Powell 5f502b243c * added protocol_guide doc 2026-01-02 12:54:57 +11:00
uncle lit 157f4dfb59 Update FAQ with new MeshCore applications and tx power settings for amped radios
Added entries for meshcore-pi and pyMC_Repeater to the FAQ
Added tx power settings for amped radios
2025-12-21 21:48:56 -08:00
mattzzw 28b2c79f91 Update faq.md
Fix typo
2025-12-14 18:29:49 +01:00
uncle lit 35c1a439b9 Update faq.md
fix typo bugs found by @4np
2025-12-08 09:33:10 -08:00
uncle lit 0d55b98324 Update faq.md
add get and set prv.key
add web site to generate new private key and specific its public key's first byte value
add link to repeater observer instruction
add links to The Comms Channel's meshcore video, MCarper's Meshcore Advantages, and Austin Mesh's MeshCore vs Meshtastic comparison
add deafness instruction for agc reset interval
add reference to Liam's Windows and Intel Mac client apps
add reference to Tree's Meshcore packet decoder
add OTA BLE update addendum for Seeed Wio Tracker L1 Pro
add instruction to use T-deck's software keyboard to enter `=` at the end of the base64 public key
2025-12-07 22:31:54 -08:00