ViezeVingertjes
2679fa8ebc
fix: prevent ESP32 KISS modem stalls under USB backpressure
...
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
ripplebiz
c289e500d5
Merge pull request #2966 from Quency-D/heltec-rc32
...
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
Florent
dccbdd4a02
nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate)
2026-07-17 07:36:39 -04:00
fdlamotte
1ca67310df
Merge pull request #2906 from fdlamotte/shutdown_peripherals
...
Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-17 06:53:00 -04:00
Quency-D
28d3f22b07
Move the rotation input to target.cpp
2026-07-17 15:50:25 +08:00
ripplebiz
23c9e0cc8d
Merge pull request #2560 from Quency-D/heltec-v4-r8
...
Add heltec-v4-r8 board
2026-07-17 13:54:45 +10:00
Quency-D
b18356caca
Optimize battery voltage reading
2026-07-16 17:45:00 +08:00
Quency-D
bf56f54427
Delete duplicate pin definitions
2026-07-16 15:14:17 +08:00
Quency-D
7a1fdb0ea2
Enable patch reception
2026-07-16 11:37:12 +08:00
Quency-D
6a651edbfe
Add a rotary encoder
2026-07-15 17:45:24 +08:00
ripplebiz
f1b84898a6
Merge pull request #1983 from rgregg/rak-ethernet
...
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
Quency-D
87c0849a07
Merge pull request #17 from meshcore-dev/dev
...
merge Dev
2026-07-15 14:49:40 +08:00
liamcottle
94d17a9f10
increase thinknode m7 max neighbours to 50
2026-07-15 16:05:37 +12:00
Ryan Gregg
3ba5de20f6
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Huw Duddy
c7573330ff
Merge pull request #2951 from meshcore-dev/fast-st7735-display
...
Fast ST7735 Display Driver
2026-07-14 16:01:14 +10:00
ripplebiz
dac6eed388
Merge pull request #2898 from entr0p1/fix/lilygo-techo-lite-sx1262-ldo
...
Lilygo T-Echo Lite - Change SX1262 from DC-DC to LDO regulator
2026-07-14 14:53:44 +10:00
ripplebiz
165906a341
Merge pull request #2899 from entr0p1/fix/lilygo-techo-lite-nrf-dcdc
...
Lilygo T-Echo Lite - nRF52840 DC-DC
2026-07-14 14:52:56 +10:00
ripplebiz
cb2147690e
Merge pull request #2905 from entr0p1/fix/heltec-t114-nrf-dcdc
...
Heltec T114 - nRF52840 DC-DC Regulator
2026-07-14 14:52:10 +10:00
Scott Powell
e46734aa6f
* trying to get Heltec Tracker and Tracker V2 working
2026-07-13 23:27:50 +10:00
liamcottle
4d3131deed
initial support for thinknode m9
2026-07-13 19:07:09 +12:00
Liam Cottle
e59f529ee9
Merge pull request #2839 from liamcottle/board/thinknode-m7
...
Add support for Elecrow ThinkNode M7
2026-07-13 15:06:17 +12:00
Liam Cottle
4322c3800a
Merge pull request #2936 from beala/beala/MeshTowerV2_feed_watchdog_2
...
Feed external hardware watchdog on Heltec Tower V2 (aka MeshTower V2) Implementation 2
2026-07-13 14:49:04 +12:00
Liam Cottle
4db4fcf3f3
Merge pull request #2935 from benskigomez/fix/m6-repeater-debug-flags
...
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
2026-07-13 12:55:13 +12:00
Jody Bentley
12c1b54859
ThinkNode M6/M1 room_server: set ROOM_PASSWORD default
...
Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
2026-07-12 18:32:09 -04:00
Alex Beal
dc17bf149c
Add an instance of ExternalWatchdogManager to Tower V2
2026-07-12 16:17:23 -06:00
Jody Bentley
484f253abb
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
...
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
2026-07-12 17:54:14 -04:00
Alex Beal
653bb4f892
Update #defines
...
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
2026-07-12 15:50:43 -06:00
Alex Beal
54ccedefdb
Merge branch 'dev' into pr-1446
2026-07-12 15:44:28 -06:00
Wessel Nieboer
7966551627
fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers
2026-07-09 16:31:28 +02:00
Quency-D
0c0965ea3a
Add heltec rc32 board
2026-07-08 16:20:12 +08:00
Florent
d19bc6fa77
introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-07 10:20:03 -04:00
entr0p1
d87bf40fde
Heltec T114 - nRF52840 DC-DC Regulator
...
- Enable DC-DC regulator on nRF52840 for Heltec T114 board (idle current reduced from ~12mA to ~9mA)
2026-07-07 17:12:59 +10:00
Florent
3ea483560b
fix tenstar c3 repeater build
2026-07-06 12:04:42 -04:00
entr0p1
f3f2db834c
Lilygo T-Echo Lite
...
- Enable nRF52840 DC-DC - board idle usage reduced from ~12mA to ~7mA
2026-07-06 15:21:09 +10:00
Scott Powell
57e5a1229c
* super fast ST7735 display driver
2026-07-06 15:09:18 +10:00
entr0p1
ce9ca615ee
Lilygo T-Echo Lite
...
- Change SX1262 to use LDO instead of DC-DC (DCC pin on SX1262 not wired in, according to schematic)
2026-07-06 14:52:18 +10:00
Kevin Le
446e6b7d41
Fixed hibernate/powerOff for ESP32 boards to stay at uA
2026-07-05 23:47:27 +07:00
Kevin Le
18c1347b78
Cleanup Poweroff for NRF52 boards
2026-07-05 22:10:47 +07:00
Quency-D
1a1239844c
Merge branch 'dev' into solar-watchdog
2026-07-04 16:47:37 +08:00
Liam Cottle
a2ae24e51f
Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605
...
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-06-27 11:32:10 +12:00
Quency-D
0d034d4738
Merge pull request #14 from meshcore-dev/dev
...
merge Dev
2026-06-26 17:16:23 +08:00
ViezeVingertjes
f2a68a164f
Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds
2026-06-25 23:27:07 +02:00
ViezeVingertjes
3ba242894d
Address review comments and sync with dev
2026-06-25 23:26:55 +02:00
ViezeVingertjes
2c5259f263
Remove NeoPixel configuration as its unused.
2026-06-25 23:26:55 +02:00
ViezeVingertjes
7407536366
Added support for the nibble zero connect
2026-06-25 23:26:55 +02:00
liamcottle
b610750b24
initial support for elecrow thinknode m7
2026-06-25 16:03:27 +12:00
ripplebiz
02e48b2eb6
Merge pull request #2752 from Quency-D/heltec-tower-v2
...
Add Heltec tower v2
2026-06-23 11:51:03 +10:00
ripplebiz
76a003eac0
Merge pull request #2771 from oltaco/nrf52-framework-buildfix
...
Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork
2026-06-23 11:37:03 +10:00
Kevin Le
07b07995a5
Fixed GPS time sync for Heltec T114
2026-06-22 09:13:36 +07:00
Ryan Gregg
7f1ecc2045
Merge remote-tracking branch 'upstream/dev' into rak-ethernet
...
# Conflicts:
# docs/faq.md
# examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00