58 commitů upstreamu nad v1.17.1. Šest konfliktů, všechny ručně:
- `src/helpers/radiolib/RadioLibWrappers.cpp` — OBOJE. Upstream `aa229245`
přidává `idle()` před `setOutputPower()` na LR2021 (tam jsou to standby-only
příkazy a přijímač se sám nevrátí do Rx); naše část si dál drží návratový
status, aby „rádio to odmítlo" a „rádio to změnilo" nevypadaly z konzole
stejně. Nezávislé věci, obě zůstávají.
- `src/helpers/CommonCLI.cpp` — VERZE UPSTREAMU. Celý blok `radio`,
`radio.rxgain` a `radio.fem.*` byl čistě upstreamový kód (diff proti merge
base v té oblasti je prázdný) a upstream ho přestěhoval do nového
`CommonRadioPrefs`; FEM příkazy zrušil ve prospěch per-variant klíčů
`fem_rxgain`/`fem_txgain`.
- `examples/simple_repeater/MyMesh.h` — NAŠE + úklid. `static_assert` na
64bajtový wire formát `RepeaterStats` zůstává, `MAX_CLIENTS` odsud mizí:
`1a8d860d` ho centralizoval do `helpers/ClientACL.h`, který je tu už
includovaný.
- `examples/simple_repeater/MyMesh.cpp` — NAŠE. Konflikt byl falešný (upstream
ten řádek nemění), jde o naše dva countery `tx_start_fail`/`tx_timeout`.
- `examples/companion_radio/ui-new/UITask.cpp` — OBOJE. Upstream přidal větve
pro `UI_SHOW_CLOCK`, my podmínku `_task->isBluetoothEnabled()`, aby displej
nenabízel PIN k párování, které není jak navázat.
- `platformio.ini` — OBOJE. Vedle našeho symlinku na lokální nRF52 framework
přibyl upstreamový `toolchain-gccarmnoneeabi@^1.140201.0`.
Navíc: `[env:native_asan]` musel dostat `DynamicConfigSerializer.cpp` do
`build_src_filter`. Merge ho přidal jen do `[env:native]` a ASAN env pak padal
na undefined reference — což vypadá jako nález sanitizeru a je to jen chybějící
překladová jednotka. Ty dva envy musí zůstat v zákrytu.
Ověřeno: `pio test -e native` i `-e native_asan` 53/53, a čtyři envy, které
skutečně flashujeme, se přeloží (Xiao repeater / companion_radio_usb /
kiss_modem, t1000e_companion_radio_ble).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Small one after v1.17.0: 57 files, +825/-200, and it merged with no conflicts at
all. Unlike 1.17.0, the release tags sit directly on origin/main, so no
`-s ours` is needed for git describe to see the release.
What matters for our nodes:
* fix-rxgain-setting-post-agc-reset -- rx gain no longer resets after an AGC
adjustment. The release notes ask repeater admins to verify radio.rxgain (and
the new radio.fem.rxgain) after updating, so that goes on the post-flash list.
* NRF52 CC310 crypto is initialised once instead of on every call, and several
NRF52 pin maps were corrected.
* New 'get/set radio.fem.rxgain/txgain' CLI commands (companion cannot configure
them yet).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Upstream shipped companion/repeater/room-server v1.17.0 today; its tree is
identical to origin/main, so that is what this merges. Our base was 7 Jul
(7b566670), i.e. 350 files / +11k lines of upstream behind.
Conflicts and how they were settled:
* Mesh.cpp -- upstream split the dedup into wasSeen() + explicit markSeen().
Kept BOTH: their new call pair AND our payload-length bound on the TRACE
path-hash read, which is what stops a crafted short TRACE from steering
isHashMatch() past the buffer.
* companion_radio/main.cpp -- upstream grew its own MultiSerialInterface
(BLE + USB + WiFi + Ethernet registered side by side), which is a superset
of the SerialDualInterface we backported from PR #1779. Took theirs whole;
our copy is now dead code. NOTE: envs that relied on the backport for a USB
console alongside BLE now need an explicit -D ENABLE_USB_INTERFACE.
* ui-new/UITask.cpp -- isSerialEnabled() was renamed isBluetoothEnabled()
upstream and DisplayDriver::RED became UIColor::warning_txt. Same intent
either way: no BT pin on screen while Bluetooth is off.
* EnvironmentSensorManager.cpp -- upstream fixed the millis() wrap on the GPS
update timer in the exact line our gpsDutyLoop() call sits on. Kept both,
with their wrap-safe compare.
* NRF52Board.cpp -- upstream independently arrived at the same sd_temp_get()
fix for SoftDevice-protected TEMP. Took their form, kept our comment, which
is the only place recording WHY (APP_MEMACC fault -> reboot on telemetry).
* RadioLibWrappers.{h,cpp}, simple_repeater/main.cpp -- add/add. Their
configSideDetectors()/performChannelScan()/external watchdog next to our
irqDoneMask()/probeDio1()/BLE pump/WDT feed. The repeater console keeps the
1032-byte reply buffer for paged analyzer output and now clears it, since a
static buffer would otherwise reprint the previous reply.
* .vscode/extensions.json -- deleted upstream, and it is in .gitignore; our
only change was a comment. Gone.
Built clean: Xiao_x1_rpt, Xiao_x2_cmp, Xiao_x3_obs, SenseCap_s1_rpt,
T1000E_cmp_cz. Not flashed to anything yet.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.
Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.
Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents
this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.
Let me know when and how to demonstrate.
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.