ripplebiz
d1e541ce3f
Merge pull request #2328 from recrof/xiao_c3-companion-fix
...
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 20:44:15 +10:00
Liam Cottle
cbb884eff9
Merge pull request #2306 from petrkr/otaupdate2
...
SDK3.x: Fix OTA includes, bump Async version
2026-04-18 19:56:56 +12:00
Rastislav Vysoky
2ad4d14bd4
fix: remove sensors from xiao c3 companion because of bootloops
2026-04-18 09:42:27 +02:00
jirogit
9a54bd1467
feat: add USB Companion Radio env for Heltec Wireless Paper
2026-04-15 19:43:51 -07:00
Petr Kracik
16ba6a18af
Variants: Enable ElegantOTA on ESP32-C6 devices
2026-04-14 15:40:31 +02:00
Rastislav Vysoky
d45cb9251a
Add OFFLINE_QUEUE_SIZE=256 for xiao nrf52 companion usb
2026-04-13 21:09:56 +02:00
Huw Duddy
ff12425140
Merge pull request #2298 from TheMalkavien/fix/waveshare-rp2040-rx-sensitivity
...
Fixes #2294 : RX path not enabled on Waveshare RP2040
2026-04-14 01:36:26 +10:00
Liam Cottle
24fb1ad847
Merge pull request #2072 from robekl/fix-t1000e-pin-comments
...
Fix T1000-E pin comments
2026-04-13 02:27:19 +12:00
Liam Cottle
baf4646f6b
Merge pull request #1833 from olanwe/set-wifi-offline-queue-sizes
...
Set OFFLINE_QUEUE_SIZE=256 for missing WiFi companion environments
2026-04-13 01:41:07 +12:00
liamcottle
36bc25d0a4
fix compilation error in wifi variants due to not enough ram
2026-04-13 01:03:32 +12:00
Malkavien
7d15a3f636
fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity
...
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL) -- driven automatically by the SX1262 chip: HIGH on TX,
LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
the switch never properly selected the LNA/RX path
Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.
Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.
Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
2026-04-12 14:49:42 +02:00
Liam Cottle
696273badb
Merge pull request #1612 from weebl2000/default-button-low
...
Default button polarity to active-LOW across all firmware types
2026-04-12 23:30:28 +12:00
Liam Cottle
d5a566439d
Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040
...
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
2026-04-12 22:45:00 +12:00
Snayler
8a5cf53ab5
Merge branch 'meshcore-dev:dev' into dev
2026-04-10 18:31:52 +01:00
me
138a2beb63
fix: remove real WiFi credentials from ThinkNode M5 variant
...
variants/thinknode_m5/platformio.ini contained actual WiFi SSID and
password credentials (Livebox-633C) committed by mistake. Replaced
with placeholder values consistent with other variants (myssid/mypwd).
2026-04-05 22:50:59 -07:00
Wessel Nieboer
39b0f400bc
Fix T1000E press=high
2026-04-04 13:19:13 +02:00
Wessel Nieboer
f7fec7cfd9
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Liam Cottle
43a48f282c
Merge pull request #2244 from jirogit/fix/generic-espnow-advert-name
...
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
2026-04-04 17:24:50 +13:00
jirogit
1966089e2a
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
...
env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME,
causing Generic ESPNow room server nodes to advertise with the wrong
device name on the mesh.
2026-04-03 19:08:15 -07:00
jirogit
acb9c59b77
fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
...
Repeater and Room Server environments in variants/thinknode_m5/platformio.ini
were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise
with the wrong device name on the mesh.
- env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater'
- env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'
2026-04-03 18:55:39 -07:00
KPrivitt
fd56ce6807
Added RAK12035 Soil Moisture and Temperature Sensor ( #2223 )
2026-04-03 22:54:24 +13:00
Liam Cottle
332c1474b8
Merge pull request #2228 from liamcottle/refactor/gat562-mesh-watch
...
Refactor GAT562 Mesh Watch
2026-04-02 17:19:12 +13:00
Liam Cottle
60dc018182
Merge pull request #2007 from khudson/r1neo
...
Muzi Works R1 Neo support
2026-04-02 00:36:44 +13:00
Liam Cottle and Wessel
28bea96880
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:27:58 +13:00
Liam Cottle and Wessel
685e7fdc82
Apply suggestion from @weebl2000
...
Co-authored-by: Wessel <wessel@weebl.me >
2026-04-02 00:23:52 +13:00
liamcottle
335e0e75e4
double press top button to go back on gat562 mesh watch
2026-04-01 21:51:32 +13:00
liamcottle
3a30c49a20
use top button to wake hibernated gat562 mesh watch
2026-04-01 21:50:33 +13:00
Liam Cottle
d65c857818
Merge pull request #2138 from MGJ520/dev_GAT562_Mesh_Watch13
...
Support for GAT562 Mesh Watch13 device
2026-03-31 21:54:38 +13:00
Snayler
47d16beecd
Fix formatting of ADC_MULTIPLIER definition
2026-03-27 01:23:04 +00:00
Snayler
acafc639d3
Add correct ADC_MULTIPLIER definition to Heltec Wireless Paper
2026-03-27 01:19:46 +00:00
Snayler
065842668f
Define ADC_MULTIPLIER for adjustable ADC calculation
2026-03-27 01:17:39 +00:00
MGJ
bddf9bd95b
Reduce unnecessary compilation time
2026-03-26 16:32:00 +08:00
fdlamotte
d0c246dae9
Merge pull request #2121 from archef2000/patch-1
...
Fix typo for ThinkNode M5 room server environment
2026-03-25 16:03:09 -04:00
MGJ
a2905f48d8
Support for GAT562 Mesh Watch13 device
2026-03-24 14:16:48 +08:00
Jeroen Vermeulen
893069e7e4
Fix default radio.rxgain for Station G2
...
As @LitBomb pointed out in his [comment](https://github.com/meshcore-dev/MeshCore/issues/2118#issuecomment-4108168109 ) on #2118 RX Boosted Gain should not be enabled for the Station G2.
This change is a fix for #2124 to make the default of `radio.rxgain` to be OFF on the Station G2.
This restores the pre-1.14.1 behaviour with the only change being the user is now able to change the setting in the CLI.
2026-03-23 23:06:42 +01:00
Liam Cottle
b8584a3129
Merge pull request #2042 from whywilson/dev
...
Add GAT562 Mesh EVB Pro Repeater and Room Server
2026-03-22 13:57:30 +13:00
Konstantin
cd7371d54d
Fix typo for ThinkNode M5 room server environment
2026-03-21 23:09:28 +01:00
whywilson
2b30b77622
Remove useless define in GAT562_Mesh_EVB_Pro.
2026-03-21 20:45:29 +08:00
ripplebiz
7e3800aee3
Merge pull request #1867 from Quency-D/dev-heltec-v4.3
...
add heltec v4.3 board
2026-03-20 20:54:51 +11:00
Quency-D
5adcc9c6f0
add heltec_mesh_node_t096 board.
2026-03-20 15:56:09 +08:00
Robert Ekl
65b03c2c0a
Fix T1000-E pin comments
2026-03-17 09:00:06 -05:00
whywilson
e37e1de5de
Update GAT562_Mesh_EVB_Pro Config and remove LoRa Specification and change Repeater name.
2026-03-17 19:46:39 +08:00
João Brázio
569bdeb083
Merge branch 'dev' into 2026/remote-lna
2026-03-16 09:40:10 +00:00
João Brázio
4bd027c79b
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
João Brázio
861b5cfcb9
Add USE_SX1262 flag to multiple platformio.ini configurations
2026-03-16 09:34:12 +00:00
whywilson
5cecbd70df
Merge branch 'dev' of https://github.com/meshcore-dev/MeshCore into dev
2026-03-16 14:53:44 +08:00
ripplebiz
e674661642
Merge pull request #1984 from samschlegel/samschlegel/rak3401-power-management
...
Add nrf52 power management for RAK3401
2026-03-16 14:37:03 +11:00
ripplebiz
76e4f66e79
Merge pull request #2009 from MGJ520/dev
...
Support for GAT562 30S Mesh Kit device and fix other minor issues
2026-03-16 14:14:00 +11:00
Wessel Nieboer
0f29b84cc5
Set AUTO_OFF_MILLIS to 0 for E213, E290
2026-03-15 15:51:31 +01:00
Wessel Nieboer
5ffb44d867
Fix Heltec E213 and E290 e-ink board builds
2026-03-15 15:51:25 +01:00