Scott Powell
9c0282016f
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
liamcottle
0f77b88679
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
ripplebiz
7571558af5
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
ripplebiz
8d422a084e
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
fce56dae50
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer
8f40193db2
Parse as signed int
2026-02-07 16:58:06 +01:00
agessaman
8669314fce
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
Wessel Nieboer
dd97d863f4
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
ViezeVingertjes
484ef3b302
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
2c6d625921
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
85410e85e3
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
f95d348c7a
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
8a6173a255
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
318452b0b0
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
82ca66a6a8
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
cdc25aeff4
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
c5c5956916
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
48e60ed57f
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
e2eadcb3f1
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6cac3d6e4f
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
20e71ebc53
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Adam Gessaman
c354f8202c
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
João Brázio
b8ce314278
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
0b822284be
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
ripplebiz
5ebfac4982
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz
a1ddfec6e4
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
agessaman
b04321f3b8
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
taco
ea085401ac
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
ripplebiz
9c7246b664
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
ViezeVingertjes
d0e6cea382
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
taco
8c9ce15f66
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
ViezeVingertjes
3171696de5
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
b04f33bd34
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
taco
348a0cfd8d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
518b651b57
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
ViezeVingertjes
a5ad202218
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
Liam Cottle
e8a11511bc
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
agessaman
62ec1b5f25
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
taco
e36ca64f00
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
ripplebiz
d17540ad88
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
Rastislav Vysoky
fe2632bcc4
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
Scott Powell
16dfed0353
* ver 1.12.0
2026-01-29 21:12:31 +11:00
Steven Linn
f866b484aa
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
ripplebiz
dd21b64fb3
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper
9dbda71566
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
liamcottle
c8992ae5b6
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
6cb97cca77
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
0d6d2b9b9f
Merge pull request #1477 from Cisien/dev
...
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
Chris
834d2ff6dd
Expose a counter to track RadioLib receive errors
...
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
ripplebiz
d32913a694
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00