Commit Graph
1080 Commits
Author SHA1 Message Date
anders-dc 2f00b0e83a fix(companion): guard null _serial in contact overwrite and full callbacks 2026-11-08 11:01:05 +01:00
agessaman c0ccb9c7ff Merge remote-tracking branch 'upstream/dev' into feat/kiss-agc-fem-control 2026-11-06 20:38:01 -08:00
Liam Cottle b09b12d4ef Merge pull request #3603 from A13xB0/companion-buzzer-cli
Add CLI command to toggle the buzzer for companions
2026-10-30 12:53:18 +13:00
fdlamotte bd4be350c5 Merge pull request #3687 from fdlamotte/display_prefs
ui: add some parameters to the cli (mostly regarding eink behaviour)
2026-10-29 08:35:36 -04:00
Florent 1d88a709bd ui: add some parameters to the cli (mostly regarding eink behaviour) 2026-10-29 08:34:41 -04:00
ripplebiz 65c6a42627 Merge pull request #3688 from Blake-Latchford/fix/stats-dup-count-wrap
Saturate duplicate packet stats instead of wrapping
2026-10-28 17:06:21 +11:00
Liam Cottle d1e27f5b21 Merge pull request #3615 from radek-sixi/fix/common-radio-prefs-signed-tx-power
Fix unsigned conversion of negative TX power in CommonRadioPrefs
2026-10-27 22:44:04 +13:00
Blake LatchfordandClaude Opus 5.5 8e0e5b8110 Saturate duplicate packet stats instead of wrapping
Tested on a Heltec V4 repeater with the counter seeded at 65530.

Fixes #3255

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:45:10 -04:00
ripplebiz 4d3178d82a Merge pull request #3617 from aXistem-dev/feat/tz-offset-quarter-hours
Show quarter-hour timezone offsets with two decimals
2026-10-26 12:27:10 +11:00
ripplebiz a36ab23469 Merge pull request #3667 from Blake-Latchford/fix/kiss-modem-usbcdc-tx-buffer
Fix broken KISS modem build on 6 ESP32-S3 platforms
2026-10-26 12:02:57 +11:00
fdlamotte d65a6b9667 Merge pull request #3659 from fdlamotte/elecrow_eink_refactor
Elecrow eink refactor
2026-10-24 19:50:03 -04:00
Florent e8be1ad6b2 UiTask: better cleaning of eink screens when hibernating 2026-10-24 10:16:56 -04:00
Blake Latchford fded88ac6a Fix broken KISS modem build on 6 ESP32-S3 platforms
Broken out from PR #3496 which has been open for a month.
2026-10-22 17:57:33 -04:00
Marcel Verdult 97a6ff714c fix(chat): refuse a negative text length for a group message
CMD_SEND_CHANNEL_TXT_MSG reads txt_type, channel_idx and a 4 byte timestamp, so
the frame needs 7 bytes before the text starts, and the branch had no length
guard. For a shorter frame "len - i" is computed in size_t, wraps, and reaches
sendGroupMessage() as a negative int. The clamp there tests
"text_len + prefix_len > MAX_TEXT_LEN", which a negative value passes, and the
following memcpy() converts the length back to a size_t: a 3 byte frame asks for
4294967292 bytes into a 197 byte stack buffer.

Two guards, because there are two mistakes. The branch now states its minimum
like most other branches of handleCmdFrame do, so a frame below 7 bytes is
answered through the existing path instead of being parsed. And
sendGroupMessage() refuses a negative length the way sendGroupData() in the same
file already does, which protects every other caller.

A frame of exactly 7 bytes keeps working and sends an empty message, as before.

Evidence. On a T-Echo running dev c9fa617c, built with
FIRMWARE_BUILD_DATE "f1-dev" and confirmed by "ver => v1.18.0 (Build: f1-dev)":

  CH_TXT len=7    -> RESP_CODE_OK
  GET_STATS core  -> uptime=78s
  CH_TXT len=3    -> NO REPLY
  DEVICE_QUERY    -> NO REPLY  (three times over 8 s, node never came back)
2026-10-22 09:33:07 +00:00
Florent afbab2de16 DisplayDriver: fixing alignment issue in vtable for nrf52 and epd display 2026-10-21 17:13:27 -04:00
Florent d1d06b92ab refactoring eink devices behaviour 2026-10-21 14:08:56 -04:00
Confituurke 8c4769d1ed Use two decimals only for exact quarter-hour offsets 2026-10-21 11:24:34 +02:00
R0ck edb94d3fdc Apply buzzer setting changes in the UI so no reboot needed. 2026-10-17 23:53:27 +01:00
R0ck b9fa77ed69 Move to companion firmware, remove from varient 2026-10-17 23:37:14 +01:00
Confituurke 5f967d818a Show quarter-hour timezone offsets with two decimals
'get tz.offset' printed one decimal, so a UTC+5:45 offset (5.75)
read back as 5.8. Print two decimals when the offset is on a quarter
hour (x.25 / x.75); everything else keeps one decimal.
2026-10-17 13:03:06 +02:00
rado b2bde37fe4 Fix unsigned conversion of negative TX power in CommonRadioPrefs 2026-10-17 09:36:59 +02:00
Liam Cottle c9fa617c38 Merge pull request #3606 from amdoolittle/feature/ble-conditional-display
Remove BLE screen when BLE not available
2026-10-17 15:38:18 +13:00
liamcottle c2c5de52be tz_offset should be treated as float when down casting calculation result to int32 2026-10-17 15:22:46 +13:00
liamcottle a763fd4c91 timezone offset is now stored as float to allow half hour offsets 2026-10-17 15:16:38 +13:00
amdoolittle 7bbc19b010 Update UITask.cpp
Housekeeping: removed unnecessary space
2026-10-16 17:30:19 -07:00
amdoolittle da9329b096 Remove BLE screen when BLE not available 2026-10-16 10:04:44 -07:00
Scott Powell a4f1601df3 * version 1.18.0 2026-10-15 19:42:01 +11:00
Liam Cottle ac25e7d956 Merge pull request #3591 from liamcottle/feature/companion-ble-wifi
Add WiFi support to Heltec v3 and v4 BLE variants
2026-10-14 20:23:11 +13:00
liamcottle 3448d06943 rework companion ui for ip address so it fits in multi interface variants 2026-10-14 16:29:41 +13:00
Scott Powell 174582e8a1 * only 'repeat on' now intercepted 2026-10-14 12:21:38 +11:00
Scott Powell 5f2deeb875 * Room: "set repeat" CLI now deprecated 2026-10-14 11:48:58 +11:00
Scott Powell 48aae4072d * don't respond to DISCOVER requests if node has adverts turned off. (isHiddenNode()) 2026-10-04 15:02:00 +11:00
Huw Duddy d07e11d7ed Merge pull request #3495 from meshcore-dev/increase-max-search-results
increased MAX_SEARCH_RESULTS to 24. (was 8)
2026-09-29 20:42:48 +10:00
Scott Powell 5c8ee09635 * changed onUnhandledResponse() to return true if handled/consumed
* unhandled responses (eg. push telemetry) now sent to app as PUSH_CODE_BINARY_RESPONSE frames
2026-09-24 13:49:57 +10:00
Scott Powell 49d0dd3141 increased MAX_SEARCH_RESULTS to 24. (was 8)
Closes #3243
2026-09-24 13:35:27 +10:00
agessaman bc4d0227fe kiss_modem: default AGC reset interval to 32 s
The AGC interval is set in 4 s steps, matching MeshCore's
agc.reset.interval, so the old 30 s default could not be restored by a
host: setting 30 gives 28. Found on hardware. Use 32 s, the nearest
multiple of 4 above it.
2026-09-23 18:51:03 -07:00
agessaman 09ee2e1223 kiss_modem: answer FEM requests strictly in arrival order
A second SetFemState sent while the first was held for a TX got an
immediate TxBusy, which reached the host before the first request's
reply. With no request IDs, the host could not tell which Set failed.

FEM requests now go through a small ordered queue (Set, Get and their
error replies). Sets still wait for TxDone to be queued and apply
once. Each reply is kept until it can be queued. Capability checks
happen in order at processing time. Only an overflow (more than 4
waiting) replies TxBusy immediately.
2026-09-23 17:41:14 -07:00
agessaman 7652ec5c26 kiss_modem: reach FEM gain through the board's radio.fem CLI commands
Boards own their FEM control through handleCommand() ("get/set
radio.fem.rxgain|txgain"). Use that instead of a parallel set of FEM
virtuals on MainBoard, so any board that implements the commands works
in KISS with no extra code.

- Remove the six FEM virtuals from MainBoard and the board overrides.
- KissModem talks to the board in one adapter. A gain counts as
  controllable only if "get" replies exactly "> on" or "> off". "set"
  is checked by reading the state back, never by its reply wording.
- SetFemState always replies with the read-back state once the
  requested bits pass the capability check.
- Guard the boards' prefs writes against a NULL store. KISS attaches
  no prefs, so "set radio.fem.*" would dereference NULL.
- Wio Tracker L1 1W TX gain is exposed again, matching its CLI.
2026-09-23 17:31:20 -07:00
agessaman 8cefda9612 kiss_modem: add radio chip boosted RX gain control
Add SetRxBoostedGain (0x20) / GetRxBoostedGain (0x21, reply 0xA1) and
capability bit 3, the KISS equivalent of the radio.rxgain CLI setting.
It is separate from FEM RX gain; a board may support either or both.

- Support is declared by the driver via a new
  RadioLibWrapper::supportsRxBoostedGain() (SX1262, SX1268, LLCC68,
  LR1110, LR1121, LR2021), so nothing is written to the radio at boot.
- The set is refused with TxBusy during TX or while host output is
  backed up. Otherwise any completed RX packet is delivered first,
  because some drivers (LR2021) drop to standby to apply the gain.
- The reply always carries the state read back from the radio.

Driver fixes found along the way, which also affect the radio.rxgain
CLI in regular firmware:
- CustomLR2021 never updated its cached gain state, so the getter
  always reported off. It now tracks the applied level per RX path
  and rolls RadioLib's cached level back if a write fails.
- CustomLR1110/LR1121 cached the requested state even when the write
  failed.
- lr11x0ResetAGC only reapplied the gain when RX_BOOSTED_GAIN was
  defined, so a runtime setting was lost on the next AGC reset.
2026-09-23 16:59:39 -07:00
agessaman 0d648e4a18 kiss_modem: keep FEM replies ordered and deliverable; drop Wio FEM control
- Wio Tracker L1 1W no longer advertises TX gain control: its setter
  drives LORA_PWR_EN, the shared LDO for the SX1262 and the PA, so
  "gain off" would power down the radio.
- A SetFemState that arrives mid-TX is now applied after TxDone is
  queued, so its reply follows TxDone.
- SetFemState replies (immediate or deferred) are retained until they
  fit in the host output queue instead of being dropped, so a change
  that took effect is always acknowledged.
- GetFemState replies queue behind an outstanding SetFemState reply;
  a further SetFemState returns TxBusy until it clears.
2026-09-23 16:11:29 -07:00
agessaman a087a5198f kiss_modem: only set USB TX buffer size on HWCDC builds
USBCDC (ARDUINO_USB_MODE=0, TinyUSB) has no setTxBufferSize, which broke
the Station G3 and Heltec Tracker V2 KISS builds.
2026-09-23 15:51:05 -07:00
agessaman fa18757f2c kiss_modem: add AGC reset interval and FEM gain control (protocol v2)
Add SetHardware sub-commands so a host can probe and configure
per-board RF front-end settings:

- GetCapabilities (0x1B): uint32 feature bits (AGC, FEM RX, FEM TX)
- Set/GetAgcResetInterval (0x1C/0x1D): 0-1020 s, 4 s resolution,
  0 disables; default stays 30 s
- Set/GetFemState (0x1E/0x1F): apply/value masks for FEM RX (LNA)
  and TX (PA) gain; all-or-nothing, Unsupported (0x08) if any
  requested bit is not controllable on this board

The AGC scheduler moves from main.cpp into KissModem so it is
configurable and unit-tested. FEM changes that arrive mid-TX are
deferred until the packet ends, since board setters drive FEM pins
directly.

MainBoard gains virtual FEM hooks (canControl/set/is for LNA and PA
gain). Boards that already implemented these methods privately now
expose them as overrides: Heltec V4, V4 R8, T096, Tracker V2,
Station G3 and Wio Tracker L1 1W.

KISS_FIRMWARE_VERSION bumped to 2.
2026-09-23 15:43:01 -07:00
Scott Powell 0812e09b40 missing board.loop() in companion, room server, kiss modem. 2026-09-22 18:01:15 +10:00
ripplebiz deaacca580 Merge pull request #3131 from liekmarflow/feature/board-api-hooks
Add board loop hook for periodic work
2026-09-22 16:43:18 +10:00
Wolfram Keil ba345d486c Add board loop hook for periodic work 2026-09-22 08:01:48 +02:00
Blake Latchford e1877c015b Constrain agc.reset.interval and allow intervals > 255s 2026-09-21 12:26:36 -04:00
ripplebiz 191e5ee2f7 Merge pull request #3402 from meshcore-dev/sensor-improvements
Sensor improvements
2026-09-21 19:03:18 +10:00
ripplebiz d1f1af18e9 Merge pull request #3431 from meshcore-dev/abstract-ui-overhaul
Abstract UI overhaul
2026-09-20 18:08:29 +10:00
liamcottle 66f2d49db6 allow fetching configured wifi password via companion cli 2026-09-20 14:22:13 +12:00
Scott Powell 9456aac555 * misc 2026-09-19 20:13:18 +10:00