Scott Powell
8c58e18466
* PicoW refactor, now using radio.std_init()
2025-06-20 16:42:49 +10:00
ripplebiz
f90dd29cb9
Merge pull request #417 from oltaco/promicro-CustomSX1262
...
refactor: promicro with CustomSX1262::std_init()
2025-06-20 13:47:40 +10:00
Scott Powell
8c00fa1f08
* refactored SensorManager::toggleGps()
2025-06-20 13:44:58 +10:00
ripplebiz
6746a0a057
Merge pull request #404 from fdlamotte/t1000_gps_toggle
...
Gps toggle on 4 clicks
Will merge, but I'll do a refactor of the gpsToggle()
2025-06-20 13:36:56 +10:00
taco
fa33f8fc49
refactor: promicro with CustomSX1262::std_init()
...
added check in CustomSX1262.h to support both txco and non-txco radios
switched promicro to use CustomSX1262::std_init()
2025-06-20 11:22:34 +10:00
Florent de Lamotte
e34d38d2d9
t1000e: gps toggle not using board class
2025-06-19 17:26:58 +02:00
Florent de Lamotte
f8bbcdb9e9
Apply refactoring to xiao_nrf52 and xiao_s3
2025-06-19 15:18:58 +02:00
Scott Powell
1f0688ee35
* added CustomSX1262::std_init()
...
* refactored variants to use std_init(): heltec_v3, t114, xiao_c3
2025-06-19 10:58:10 +10:00
Florent de Lamotte
568e4332b2
Gps toggle on 4 clicks
2025-06-18 11:52:16 +02:00
Scott Powell
28c0be48eb
* companion: new CMD_GET_ADVERT_PATH -> RESP_CODE_ADVERT_PATH
2025-06-18 16:02:09 +10:00
Scott Powell
11fc3d992b
Merge commit '70158374ca7287db3409ab61855b78413596cd85' into dev
2025-06-18 14:59:19 +10:00
Scott Powell
042b600c46
* noise floor can now be queried even when int.thresh = 0
2025-06-18 01:27:53 +10:00
João Brázio
e5c2857d52
Update VBAT schematic
2025-06-16 21:28:59 +01:00
João Brázio
7465afb0b9
VBAT schematic
2025-06-16 19:51:53 +01:00
João Brázio
5ff75e303d
Rename LED pin
2025-06-16 02:01:16 +01:00
João Brázio
253fcba9c7
Waveshare RP2040-LoRa board support
2025-06-15 23:48:49 +01:00
Scott Powell
58426b150a
* fix for when AGC reset is disabled (interval = 0)
2025-06-13 14:25:09 +10:00
Scott Powell
b7be7f7966
* repeater and room server: new CLI setting "agc.reset.interval" (seconds)
2025-06-13 14:15:21 +10:00
JQ
b460a97abb
add TX led to thinknode M1
2025-06-09 17:35:00 -07:00
Scott Powell
f7badd2742
Merge branch 'datastore' into dev
2025-06-07 16:04:35 +10:00
liamcottle
cb6d75c5ef
fix 150mA power draw on ThinkNode M1
2025-06-06 21:55:03 +12:00
Scott Powell
6c75d64133
* companion: refactor of all filesystem access to new DataStore module
2025-06-06 15:30:35 +10:00
Scott Powell
d2a0e22592
* noise floor lower bound now clamped to -120
2025-06-05 14:04:33 +10:00
Scott Powell
244dfa38c3
* SERVER_RESPONSE_DELAY now applied to: login responses, companion telemetry responses
2025-06-04 18:10:47 +10:00
Scott Powell
ed0ceaa4af
* Mesh: reciprocal path send now with slightly less priority and 500ms delay
2025-06-03 20:28:05 +10:00
Scott Powell
609315cded
* Companion now can be configured with TXT_ACK_DELAY (default is 200ms)
2025-06-03 20:27:09 +10:00
Scott Powell
a783b9a2b7
* MicroNMEALocationProvider: clock param now NULL by default
2025-06-01 23:55:57 +10:00
ripplebiz
bf42064bc0
Merge pull request #348 from fdlamotte/gps_time_sync
...
gps : sync time on fix
2025-06-01 23:51:44 +10:00
Florent
1814599ba7
t1000: remove sync custom var
2025-06-01 15:32:02 +02:00
Florent
52bc294687
micronmea: was using global rtc_clock to sync instead of _clock
2025-06-01 14:12:22 +02:00
ripplebiz
eb009d165b
Merge pull request #351 from fdlamotte/stm32_sensors
...
wio_e5 : bme280 support
2025-06-01 16:38:25 +10:00
Florent
c7a212b422
wioe5: integrate sensor in sensor mgr
2025-06-01 08:30:53 +02:00
JQ
24e0b198bd
better fonts for GxEPDDisplay
2025-05-31 15:22:59 -07:00
Florent
40600e3f4a
gps : sync time on fix
2025-05-31 10:57:22 +02:00
recrof
54536b45d9
added basic support for LilyGo Tlora C6
2025-05-30 14:31:44 +02:00
ripplebiz
ea7d02069f
Merge pull request #332 from cod3doomy/dev
...
RAK4631: Add GPS support
2025-05-28 23:11:44 +10:00
JQ
3dab3db57c
add scaling to bitmaps for EPD display, and enable buzzer for Thinknode M1
2025-05-27 19:20:35 -07:00
cod3doomy
622e71a819
Merge branch 'ripplebiz:dev' into dev
2025-05-27 19:14:20 -07:00
ripplebiz
3f20ca5301
Merge pull request #337 from hank/dev
...
TBeam 1.1 PMU fixes
2025-05-27 23:32:09 +10:00
hank
5fc319879d
Merge branch 'dev' of https://github.com/ripplebiz/MeshCore into dev
2025-05-26 17:18:57 -07:00
Scott Powell
c3fd16d5fa
* interference threshold now stored in prefs, CLI: set/get "int.thresh"
2025-05-26 17:18:49 +10:00
Scott Powell
f51a3a7b9a
Merge branch 'dev' into scan_exp
2025-05-26 16:44:27 +10:00
cod3doomy
7c8a1d3fac
RAK4631: Add RAK12500 GPS support
...
Added RAK12500 GPS support
Added socket scan capability to determine which socket the GPS is connected to
T-beam supreme: added conditional to displaying location data to only when gps is active
2025-05-25 22:48:04 -07:00
cod3doomy
3b39d9bb43
t-beam supreme: fixes and consolidation
...
Made changes requested by Scott
Simplified gps init sequence and removed unnecessary code
Reverted SensorManager change
Updated PMU flow to enable header outputs
2025-05-25 21:23:31 -07:00
cod3doomy
7cb0b8e233
Merge branch 'ripplebiz:dev' into dev
2025-05-25 21:11:07 -07:00
Scott Powell
3455696308
* RAK: "start ota" now replies with Bluetooth MAC address
2025-05-26 12:23:52 +10:00
cod3doomy
9158d9311a
Merge branch 'ripplebiz:dev' into dev
2025-05-25 10:05:56 -07:00
Scott Powell
adc2d6fbbf
* dynamic noise floor sampling
2025-05-25 21:44:15 +10:00
Scott Powell
4c95201e60
* added Radio::loop() virtual function
...
* RadioLibWrapper: new isChannelActive() based on current RSSI being above noise_floor + THRESHOLD
2025-05-24 21:24:44 +10:00
Scott Powell
ef6492a035
* refactor of RadioLibWrapper::isReceiving()
2025-05-24 20:42:00 +10:00