Commit Graph
21 Commits
Author SHA1 Message Date
Florent dea38936d7 gps: move the gps CLI to GpsPrefs and convert all targets 2026-11-08 08:47:34 -04:00
Florent a1528cc36f Remove unused buttonStateChanged from some variants 2026-10-27 15:52:36 -04:00
ripplebiz 17b809d62c Merge pull request #3060 from entr0p1/fix/mesh-debug-active
Clean up debugs left on in platform.ini files
2026-07-30 12:35:22 +10:00
entr0p1 52fb56395d Clean up debugs left on in platform.ini files 2026-07-29 18:27:15 +10:00
liamcottle 6e815d755f usb companion firmwares now require build flag to include usb interface 2026-07-28 03:45:02 +12:00
Scott Powell 37ff90ab95 * build fixes for NullDisplayDriver 2026-07-22 18:55:59 +10:00
fdlamotte 79e06eaf99 Merge pull request #2887 from spinda/thinknode-m3-dev
Fix GPS and LEDs on ThinkNode M3
2026-07-20 17:42:30 -04:00
Kevin Le 18c1347b78 Cleanup Poweroff for NRF52 boards 2026-07-05 22:10:47 +07:00
Naomi Smith 2221f20525 Fix GPS and LEDs on ThinkNode M3
GPS support was implemented incorrectly for the ThinkNode M3. The reset
pin was being driven when it should be left floating for this unit. The
enable pin also wasn't being picked up by `MicroNMEALocationProvider`
because of a mismatch in constant naming conventions. I did a general
cleanup of the GPS and ThinkNode M3 bring-up code so that constant names
line up and "*_ACTIVE" constants are used consistently vs hardcoding
`HIGH`/`LOW`. After making these changes, serial data immediately starts
streaming in from the NMEA on boot and GPS detection just works.

LED handling was also not quite right for the ThinkNode M3. The LoRa TX
LED was being driven high to turn it on when it should actually be
driven low. I changed the code to use the `LED_STATE_ON` constant and
also added a little code to the shutdown path to properly make sure that
all LEDs are turned off.

Tested and confirmed working on real hardware.

Resolves both #1864 and #2879.
2026-07-03 12:07:19 -07:00
Scott Powell 8903b907d1 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00
Liam Cottle 59a6ee658e Merge pull request #2432 from recrof/kiss-radio-everywhere
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
Rastislav Vysoky 0a2f6b1cd9 add kiss radio env to most of the variants 2026-04-28 15:09:25 +02:00
OverkillFPV db254a0051 Merge branch 'dev' into lora-longer-preamble 2026-04-16 20:43:46 +10:00
Wessel Nieboer f7fec7cfd9 Default button polarity to active-LOW across all firmware types
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
overkillfpv 78cc18f919 changed to set the preamble on radio settings change 2026-03-29 21:45:16 +11:00
Wessel Nieboer b1de55a3c5 Pass rtc_clock to all MicroNMEALocationProvider instances
Enable GPS time synchronization across all variants by passing
&rtc_clock to MicroNMEALocationProvider. When GPS gets a valid
fix, the RTC clock is now updated automatically every 30 minutes.

Updated 16 variants: rak4631, lilygo_tbeam_SX1262, rak_wismesh_tag,
lilygo_tbeam_supreme_SX1262, thinknode_m3, heltec_v4, thinknode_m1,
lilygo_tbeam_SX1276, meshadventurer, nano_g2_ultra, heltec_v3,
promicro, xiao_c3, heltec_tracker_v2, keepteen_lt1, heltec_mesh_solar.
2026-03-03 15:45:07 +01:00
Wessel Nieboer 20e71ebc53 Allow negative tx power
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Rastislav Vysoky f0ccffe9ad renamed board files 2026-01-29 16:00:19 +01:00
Rastislav Vysoky c3ea2ca890 fixed build errors and typos/inconsistencies 2026-01-29 15:32:51 +01:00
Frieder Schrempf 65d2d36b02 variants: Thinknode M3/M6: Use common Nrf52Board class
Signed-off-by: Frieder Schrempf <frieder@fris.de>
2026-01-08 22:44:14 +01:00
Florent 13b9d394ef thinknode_m3: initial commit 2025-12-12 17:16:28 +01:00