Commit Graph
885 Commits
Author SHA1 Message Date
Wessel Nieboer c7fd4ee9e2 Add 1ms delay after powering PA (cold-boot) 2026-02-28 19:05:31 +01:00
Wessel Nieboer 75730e60db Hold GC1109 PA_POWER during deep sleep for LNA RX wake
The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep
to keep the LNA active, enabling proper RX sensitivity for
wake-on-packet. Without this, the LNA is unpowered during sleep
and RX wake sensitivity is degraded by ~17dB.

Release RTC holds in begin() after configuring GPIO registers
(not before) to ensure glitch-free pin transitions on wake.

Trade-off: ~6.5mA additional sleep current for significantly
improved wake-on-packet range.
2026-02-28 19:05:31 +01:00
Liam Cottle ae2d9c40cc Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin
Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4
2026-02-28 17:35:17 +13:00
Scott Powell 2c167d4479 * misc 2026-02-24 21:30:04 +11:00
callum5892 648c9bb818 Added build flags for M5Stack Unit C6L
Enabled USB-CDC on boot for M5Stack_Unit_C6L_companion_radio_usb to fix serial connection issues
2026-02-23 17:31:18 +00:00
ripplebiz f920af9f80 Merge pull request #1792 from ElectroMW/feature/t-beam-supreme-improvements
T-Beam Supreme - Make full use of board's 8MB Flash and add Companion WiFi target
2026-02-23 12:38:56 +11:00
Sam Koucha 006ff78cd7 Make full use of board's 8MB Flash and add companion WiFI target 2026-02-22 18:14:39 +00:00
Sander van Grieken e57c22a0fb add companion usb build target for Heltec Wireless Tracker 2026-02-22 17:57:36 +01:00
Kevin Le c9b9fbd8bb Reverted to use GPIO 17, 18 as I2C for Heltec v4 repeater 2026-02-18 22:38:24 +07:00
Kevin Le a989a2bb0c Disabled periph_power for Heltec v4's display 2026-02-18 22:32:01 +07:00
Kevin Le ade1c8f7c2 Set back PIN_VEXT_EN_ACTIVE=HIGH 2026-02-18 22:32:01 +07:00
3DPGG 53e92916d9 Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.

The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.

As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
recrof 2bb616689c fix M5Stack Unit M6L build errors 2026-02-15 11:25:27 +01:00
ripplebiz 4ece286c9b Merge pull request #1669 from Azuresword/fix/wio-tracker-l1-grove-sensor-v2
Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
2026-02-15 15:55:25 +11:00
Liam Cottle 3ac7af47e0 Merge pull request #1671 from recrof/rak3112-fix
fix: usb and ui for rak 3112
2026-02-12 11:39:27 +13:00
Rastislav Vysoky 562a245695 fix usb and build for rak 3112 2026-02-11 09:34:41 +01:00
dylanandClaude Opus 4.6 8535cf5726 Fix WioTrackerL1 BLE companion: route sensors to Grove I2C bus (Wire1)
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-02-11 14:12:48 +08:00
ripplebiz f4b4b9addc Merge pull request #1611 from weebl2000/semtech-patch-tracker-v2
Enable register patch heltec tracker v2
2026-02-11 14:04:58 +11:00
Snayler eb21c51f71 Enable TX LED for LilyGo LoRa32 V2.1_1.6
Working on my device, green TX LED starts blinking every time I transmit
2026-02-09 23:20:29 +00:00
ripplebiz 469c2e7332 Merge pull request #1570 from Quency-D/fix-heltec-power-consumption
Fix heltec-v4 power consumption
2026-02-09 16:49:49 +11:00
ripplebiz 7571558af5 Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
Liam Cottle 70fbe7f38a Merge pull request #1616 from jbrazio/2026/raknorm
Refactor environment names and build flags for RAK variants
2026-02-09 01:33:26 +13:00
Thane Gill 6d9b3332d5 Correct manufacturer name 'Elecrow ThinkNode M5' 2026-02-07 17:05:51 -08:00
Liam Cottle fce56dae50 Merge pull request #1316 from weebl2000/allow-negative-tx
Allow negative tx
2026-02-08 12:43:10 +13:00
João Brázio 3c7f9f2bee Refactor environment names and build flags for RAK variants 2026-02-07 21:26:28 +00:00
Wessel Nieboer 41241e9cba Enable register patch heltec tracker v2 2026-02-07 16:04:01 +01:00
ViezeVingertjes 48e60ed57f Rewrite KISS modem to be fully spec-compliant 2026-02-07 08:51:52 +01:00
ripplebiz 7041a433f2 Merge pull request #1578 from recrof/m5stack-unit-c6l
initial port of M5Stack Unit C6L
2026-02-07 14:21:47 +11:00
ripplebiz e2eadcb3f1 Merge pull request #1596 from jbrazio/2026/t114-sensors
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz 6cac3d6e4f Merge pull request #1591 from agessaman/fix-kiss-noise-floor
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer 20e71ebc53 Allow negative tx power
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
João Brázio b8ce314278 Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors 2026-02-05 13:36:22 +00:00
João Brázio 0b822284be Refactor Heltec T114 sensor management 2026-02-05 13:35:04 +00:00
João Brázio 499ee0ef23 Merge remote-tracking branch 'pikolin/T114_sensors' into 2026/t114-sensors 2026-02-05 12:57:27 +00:00
ripplebiz 38414f07de Merge pull request #1398 from Socalix/heltecv4-register1
Improve Heltec v4 RX reception with undocumented register patch
2026-02-05 19:14:18 +11:00
agessaman b04321f3b8 fix(kiss): periodic noise floor calibration and AGC reset
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
  and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
Rastislav Vysoky 6978cea569 initial port of M5Stack Unit C6L, update pioarduino to newer bugfix release 2026-02-02 22:58:55 +01:00
Quency-D 2c4a5df4cc Fix low power consumption issues 2026-02-02 14:19:42 +08:00
ripplebiz 68fd239704 Merge pull request #1549 from Meshcore-Portugal/jbrazio/t114-fix
Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
2026-02-02 13:36:25 +11:00
Jan Pinkas eb1409e28b Enable I2C sensors and EnvironmentSensorManager for Heltec T114 2026-02-01 09:05:03 +01:00
João Brázio c2a0441201 Revert "Merge pull request #1428 from etienn01/update-t114-i2c"
This reverts commit 8bafdae3bd, reversing
changes made to b777ffc865.

This patch needs to be reverted because it boot freezes t114 433Mhz variant.
2026-01-31 13:45:58 +00:00
taco fe3ace46ae t114: remove extra DCDC enable 2026-01-31 23:48:28 +11:00
ripplebiz d17540ad88 Merge pull request #1509 from stevenlafl/tbeam-1w
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
SoCalix 2475bbd2d1 Merge branch 'dev' into heltecv4-register1 2026-01-29 09:12:35 -06:00
Rastislav Vysoky f0ccffe9ad renamed board files 2026-01-29 16:00:19 +01:00
Rastislav Vysoky c3ea2ca890 fixed build errors and typos/inconsistencies 2026-01-29 15:32:51 +01:00
Steven Linn 1a311a6fc4 Set LilyGO T-Beam 1W to use TX0 3.0V (within reference +2.85V~+3.15V) 2026-01-28 22:24:57 -07:00
Steven Linn f866b484aa Add battery min/max voltage parameter support 2026-01-28 22:24:49 -07:00
Steven Linn 2d1871be0b Add LilyGO T-Beam 1W Support 2026-01-28 22:24:43 -07:00
Liam Cottle 97c3c56209 Merge pull request #1508 from recrof/rak4631-cleanup
cleanup: moved RAK4631 pindefs from board file to variant.h
2026-01-29 12:35:47 +13:00