liamcottle
634b39f3bb
add support for new companion ui on thinknode m1
2025-08-09 00:21:10 +12:00
Scott Powell
e9ba5be910
* UI revamp for companion radios
2025-08-08 20:01:31 +10:00
ripplebiz
51b5d126a9
Merge pull request #563 from Cisien/cisien/add-rx-time
...
Add a counter to track rx time for repeater stats
2025-08-01 19:59:20 +10:00
Scott Powell
8bef2e75a6
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
ripplebiz
d74482f061
Merge pull request #547 from fdlamotte/sensors_gpio
...
sensors: gpio command
2025-08-01 19:06:44 +10:00
Scott Powell
a457a5af77
* CMD_SEND_PATH_DISCOVERY_REQ: now force the sendRequest() to use flood mode
2025-07-31 14:38:11 +10:00
Scott Powell
36cfc506ca
* REQ_TYPE_GET_TELEMETRY_DATA, first reserved byte (of 4) is now inverse mask to apply to permissions
2025-07-31 13:45:53 +10:00
Scott Powell
2b30d3a2aa
* Companion: experimental CMD_SEND_DISCOVERY_REQ -> PUSH_CODE_DISCOVERY_RESPONSE
2025-07-31 13:04:16 +10:00
Chris
142cd33e2d
Add a counter to track rx time for repeater stats
2025-07-30 09:41:20 -07:00
Scott Powell
cd83a341a9
* companion: fix for CMD_IMPORT_PRIVATE_KEY, to re-calc shared secrets
2025-07-30 16:00:47 +10:00
Scott Powell
07657a9195
* companion: bug fix for CMD_ADD_UPDATE_CONTACT
2025-07-30 14:57:38 +10:00
Scott Powell
0025d7c01c
* Companion: CMD_ADD_UPDATE_CONTACT now with optional extra 'last_mod' timestamp
2025-07-25 22:59:48 +10:00
Scott Powell
02e89aafa4
* ver bump to 1.7.4
2025-07-24 20:30:35 +10:00
Scott Powell
22efc0e72f
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Florent
da9d2e3591
sensors: gpio apply masks
2025-07-23 08:02:57 +02:00
Florent
c320999283
sensors: gpio command
2025-07-22 21:08:15 +02:00
ripplebiz
042695a754
Merge pull request #526 from oltaco/uitask-add-gps-alert
...
add GPS UI alert to quad-press
2025-07-16 23:04:39 +10:00
Scott Powell
bd35daf4ca
* sensor: "setperm {pubkey-hex} 0" command can now remove by partial pubkey
...
* sensor: login with blank password now just checks if sender is in ACL, and returns permissions (if so)
2025-07-16 21:16:05 +10:00
Scott Powell
64adc557e6
* companion: optional double ACKs, new prefs.multi_acks
2025-07-16 19:25:28 +10:00
Scott Powell
51eae0bf6f
* CommonCLI: new "multi.acks" config setting
2025-07-16 18:51:18 +10:00
Scott Powell
43eaf7195b
Merge branch 'dev' into double-acks
2025-07-16 18:02:41 +10:00
Scott Powell
6e07e6fec5
* Sensor permission levels renamed. Misc sensor fixes.
2025-07-16 14:18:05 +10:00
taco
bf3e489275
add GPS UI alert to quad-press
2025-07-16 10:35:48 +10:00
Scott Powell
429721a47e
Merge branch 'dev' into double-acks
2025-07-15 17:02:20 +10:00
Scott Powell
a6067daba7
* ver bump
2025-07-15 15:59:10 +10:00
Scott Powell
b4f8379663
* companion: added CMD_FACTORY_RESET (51)
2025-07-15 15:56:59 +10:00
Scott Powell
f5f03ef00e
* simple_sensor: redesigned permissions
...
* companion: PUSH_CODE_LOGIN_SUCCESS now has extra byte in frame for ACL permissions
2025-07-15 15:05:38 +10:00
Scott Powell
aff4a8864f
* companion: serial protocol ver bump (FIRMWARE_VER_CODE) now 7
2025-07-14 13:09:22 +10:00
Scott Powell
ae82897fbd
* companion: reverted PUSH_CODE_TELEMETRY_RESPONSE, added new PUSH_CODE_BINARY_RESPONSE
2025-07-14 12:46:51 +10:00
Scott Powell
f47f3214bc
* companion: added CMD_SEND_BINARY_REQ (50)
2025-07-14 12:25:34 +10:00
Scott Powell
8362ecd8e2
* Sensor: "get acl" command
2025-07-14 10:12:27 +10:00
Scott Powell
8c49467b6d
* simple_sensor: new REQ_TYPE_GET_ACCESS_LIST
2025-07-13 18:50:52 +10:00
Scott Powell
11b15d925e
* simple_sensor: handleCustomCommand() hook
2025-07-13 15:30:49 +10:00
Scott Powell
c4f0f1eede
* simple_sensor: added alert send queue, with retries, checks for ACKs, etc. Low pri alerts only 1 send attempt, otherwise 4 attempts
2025-07-12 12:26:16 +10:00
Scott Powell
ba7bbbdf54
Merge branch 'dev' into double-acks
2025-07-12 10:36:03 +10:00
Scott Powell
41d285535a
* companion: added CMD_GET_TUNING_PARAMS -> RESP_CODE_TUNING_PARAMS
2025-07-09 23:10:33 +10:00
Scott Powell
fa06dee97c
* sensor node: now have two alert priorities, LO, HI
2025-07-09 15:50:36 +10:00
Scott Powell
b574709030
Merge branch 'dev' into double-acks
2025-07-09 14:59:25 +10:00
Scott Powell
7954e8fb1b
* misc
2025-07-08 23:19:35 +10:00
Scott Powell
44ae1d42b5
* misc fixes
2025-07-08 23:19:35 +10:00
Scott Powell
5ac7b9e03d
* implemented encoding responses to REQ_TYPE_GET_AVG_MIN_MAX
2025-07-08 23:19:35 +10:00
Scott Powell
25bde77afb
* implemented getter methods for telemetry value types
2025-07-08 23:19:35 +10:00
Scott Powell
8c56e9901f
* refactor: CommonCLI, processing of optional command prefix moved to handleCommand() call sites
...
* Sensor, anon_req now just for admin login (guest password now unused)
* special CLI command, "setperm {pubkey-hex} {permissions-int16}" for admin(s) to manage user access (permissions 0 = remove)
2025-07-08 23:19:35 +10:00
Scott Powell
3bb33a8017
* simplified alertIf()
...
* refactored TimeSeriesData to top-level class
2025-07-08 23:19:35 +10:00
Scott Powell
a7f8ac6b9d
* added REQ_TYPE_GET_AVG_MIN_MAX
...
* TimeSeriesData
* very basic SensorMesh::sendAlert()
2025-07-08 23:19:35 +10:00
Scott Powell
1c9194181a
* Mesh::onAnonDataRecv() slight optimisation, so that shared-secret calc doesn't need to be repeated
...
* SensporMesh: req_type now optionally encoded in anon_req payload (so can send various requests without a prior login)
2025-07-08 23:19:35 +10:00
Scott Powell
2df34a67b1
* first cut of new simple_sensor sketch
2025-07-08 23:19:34 +10:00
Scott Powell
169d33290e
Merge branch 'dev' into double-acks
2025-07-08 22:14:48 +10:00
liamcottle
70881f56ce
tidy logic for devices with display
2025-07-06 14:16:43 +12:00
liamcottle
c40563ff53
dont show cli data replies on display
2025-07-06 14:07:56 +12:00