Commit Graph
241 Commits
Author SHA1 Message Date
Scott Powell cfb7d156e9 Merge branch 'dev' into config-serializer
# Conflicts:
#	test/mocks/Arduino.h
#	test/mocks/Stream.h
2026-07-24 15:06:48 +10:00
agessaman 20f7421f72 fix(room_server): support RX boosted gain
The room server never supported RX boosted gain, while the repeater
does. Three consequences on SX1262/SX1268 boards:

- boosted gain was never applied to the radio at boot, so a room server
  ran in power-saving RX mode while an identical repeater ran boosted -
  a real receive-sensitivity difference with nothing pointing at it
- _prefs.rx_boosted_gain was never initialised (the prefs are memset to
  0 before defaults are set), so it defaulted to off
- 'set radio.rxgain on' replied "Error: unsupported" but CommonCLI had
  already written the value to prefs and saved them, so a stale setting
  survived reboot and was never applied

Mirror the repeater's implementation: initialise the pref default under
the same USE_SX1262/USE_SX1268 and SX126X_RX_BOOSTED_GAIN guards, apply
it during radio init, and override setRxBoostedGain() so the CLI reports
success and takes effect.

Built Heltec_v3_room_server (SX1262) and LilyGo_T3S3_sx1276_room_server
(guards compile out cleanly).
2026-07-21 12:23:20 -07:00
Scott Powell 0b77e07d30 Merge branch 'dev' into config-serializer 2026-07-16 17:22:28 +10:00
Scott Powell a4e7cdf4f3 * first draft of new ConfigSerializer. (simple embedded JSON prefs) 2026-07-15 01:23:57 +10:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Neil Alexander ea95fa0ad6 Fix recv_pkt_region incorrect usage
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.

`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
2026-07-02 09:28:41 +01:00
Ryan Gregg 7f1ecc2045 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
Wessel Nieboer e77b6b101f Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
Wessel Nieboer 720cd75167 Use hardware channel activity detection for checking interference 2026-06-14 15:19:18 +02:00
Quency-D 606f8f1cc3 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell f4d0485dd6 * version 1.16.0 2026-06-06 21:09:38 +10:00
Scott Powell a4c1981e6a * default now 8, per the will of the peoples. 2026-06-06 21:00:58 +10:00
Scott Powell d66597c3e7 * new CLI config: flood.max.advert (default 16) 2026-06-06 13:09:24 +10:00
Sefinek 4ace26210c docs: fix typos, grammar, and formatting in FAQ and code comments 2026-06-02 22:12:18 +02:00
Scott Powell 3a707fad43 * simplified the new flood.max.unscoped pref 2026-06-02 14:15:33 +10:00
Chris Barker a7bb4bef76 Feat: Adds flood.max.unscoped setting
Before this commit, there was no way to set a different max hop count
for unscoped messages.

Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.
2026-06-01 21:30:17 +01:00
AtlavoxDev 6a3db76e27 Rename bootComplete() to onBootComplete() for naming consistency
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
AtlavoxDev bb8e40ff22 Add MainBoard::bootComplete() hook for boot-indicator LED feedback
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
Rastislav Vysoky d451d11d63 Change room server flood advert interval to 47 hours 2026-05-21 14:53:49 +02:00
Ryan Gregg 4761d49449 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-05-18 20:57:28 +00:00
Quency-D 747845cfc2 Merge branch 'dev' into cli-lna-command 2026-05-09 18:19:31 +08:00
Quency-D 1b2faf07fc Merge branch 'dev' into solar-watchdog 2026-05-09 18:08:32 +08:00
Scott Powell 8903b907d1 * Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power() 2026-05-01 14:47:07 +10:00
liamcottle e85febb858 added website to room server splash screen 2026-04-28 20:39:07 +12:00
Quency-D ef83591306 Merge pull request #10 from meshcore-dev/dev
merge Dev
2026-04-27 14:48:26 +08:00
Quency-D 9641f7b2a2 Merge branch 'dev' into cli-lna-command 2026-04-25 15:28:07 +08:00
Ryan Gregg 1fe2bb9068 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
2026-04-20 15:06:09 +00:00
Scott Powell f787cdf5fc * version 1.15.0 2026-04-19 11:27:55 +10:00
Scott Powell 4f40ffb305 Merge branch 'default-scope' into dev 2026-04-17 16:30:19 +10:00
Scott Powell 2b33c0d19a * bug fix 2026-04-17 14:38:03 +10:00
Scott Powell 1e6eeb0d80 * Repeater, room server: rule change for sendFloodReply() 2026-04-16 13:22:39 +10:00
Scott Powell 03fca12415 * repeater: refactored 'region' CLI commands -> CommonCLI
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
2026-04-15 13:32:49 +10:00
Wessel Nieboer f7fec7cfd9 Default button polarity to active-LOW across all firmware types
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
Quency-D 50fd11227a Fix the memory leak issue in the strdup function. 2026-03-24 13:57:11 +08:00
Quency-D 1cc1b7fa58 Add v4 FEM LNA CLI control commands. 2026-03-24 10:48:15 +08:00
Scott Powell 03c44fb125 * version 1.14.1 2026-03-20 12:32:41 +11:00
Orum 894c6c13a1 Add MCU temperature to telemetry responses from room servers. 2026-03-16 17:34:16 -05:00
Scott Powell 76a116b39a * Repeater and Room Server: flood advert timer now uses the path_hash_mode pref 2026-03-16 13:56:19 +11:00
Ryan GreggandClaude Opus 4.6 2afeb07beb Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code
The Ethernet retry loop in repeater and room server checked
hardwareStatus() and linkStatus() before calling Ethernet.begin(),
which always returned EthernetNoHardware since hardware detection
only happens during begin(). Extract shared Ethernet CLI code into
EthernetCLI.h to prevent future divergence. Also fix time_t type
mismatch in companion radio Ethernet init.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-13 10:48:42 -07:00
Ryan GreggandClaude Sonnet 4.6 062be045f3 Address PR review feedback from liamcottle (second round)
- Rename eth command to eth.status for consistency with other commands
- Rename generateDeviceMac to generateEthernetMac for clarity
- Refactor ethernet_handle_command to return false by default
- Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface)
- Boot companion radio without Ethernet on init failure (LoRa-only recovery mode)
- Remove > prompt from ethernet CLI for consistency with serial interface
- Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined
- Fix TCP socket leak when duplicate client detection fires
- Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface
- Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio)
- Clarify eth.status command is only available in repeater and room server firmware

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-11 12:43:08 -07:00
Ryan Gregg 359832ab5b Updates based on PR review feedback from liamcottle 2026-03-10 22:35:31 -07:00
Ryan GreggandClaude Opus 4.6 d0d415d5f6 Add native Ethernet support for RAK4631 repeater, room server, and companion
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.

- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
  and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-10 20:43:59 -07:00
ripplebiz 71e1e63dfd Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
ripplebiz 1391fda85b Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Scott Powell bece76210e * ver 1.14.0 2026-03-06 12:20:04 +11:00
Wessel Nieboer d7b406eb9a Address review comments 2026-03-04 03:13:53 +01:00
Daniel Novak 3c4d10f55c Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.

This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Scott Powell 1d845c9e0f * room server fix 2026-02-24 01:08:11 +11:00
Scott Powell 1754d0d328 * companion: new pref: path_hash_mode (0..2)
* companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode
* companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)
2026-02-23 18:26:56 +11:00