Commit Graph
884 Commits
Author SHA1 Message Date
João Brázio 21ea7b5321 Merge pull request #2 from weebl2000/2026/remote-lna
Make sure LR1110 builds
2026-03-16 09:55:00 +00:00
João Brázio 569bdeb083 Merge branch 'dev' into 2026/remote-lna 2026-03-16 09:40:10 +00:00
João Brázio 4bd027c79b Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna 2026-03-16 09:37:55 +00:00
Wessel Nieboer 0f29b84cc5 Set AUTO_OFF_MILLIS to 0 for E213, E290 2026-03-15 15:51:31 +01:00
Wessel Nieboer 5ffb44d867 Fix Heltec E213 and E290 e-ink board builds 2026-03-15 15:51:25 +01:00
Wessel Nieboer 6d07c7af79 Make sure LR1110 builds 2026-03-13 13:48:36 +01:00
Scott Powell 09bba14d96 Merge branch 'main' into dev 2026-03-12 18:14:56 +11:00
ripplebiz abee981012 Merge pull request #1873 from Specter242/codex/sensecap-solar-led-poweroff-parity
sensecap solar: add poweroff/shutdown support and nrf52 PM parity
2026-03-12 18:13:14 +11:00
Liam Cottle c3a004512f Merge pull request #1991 from weebl2000/prevent-auto-restart-ble-nrf52
Prevent auto-restarting BLE when disabling it on nRF52
2026-03-11 22:05:25 +13:00
Liam Cottle 0463e8c032 Merge pull request #1483 from ssp97/dev
fix: avoid redundant redefinition of SX126X_DIO3_TCXO_VOLTAGE
2026-03-11 21:49:31 +13:00
Liam Cottle 32f29baf6b Merge pull request #1845 from lincomatic/repeaterbaud
don't limit bridge_baud to 115200
2026-03-11 11:51:00 +13:00
Wessel Nieboer 6047d6a615 Prevent auto-restarting BLE when disabling it on nRF52
If client is still connected, client would automatically reconnect
immediately thus keeping BLE on

fixes #1933
2026-03-10 14:31:58 +01:00
Scott Powell 4de3db2fc0 * Dispatcher::next_tx_time init fix 2026-03-08 23:58:28 +11:00
ripplebiz 71e1e63dfd Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
ripplebiz 1391fda85b Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Liam Cottle 6f0bc8b611 Merge pull request #1936 from Quency-D/dev-heltec-tracker-v2
Update Heltec Tracker v2 to version KCT8103L.
2026-03-07 17:59:19 +13:00
Liam Cottle 68eca60309 Merge pull request #1350 from weebl2000/sync-gps-time-30min
Sync gps time every 30min
2026-03-07 17:11:07 +13:00
Quency-D cc48c8c91d Update Heltec Tracker v2 to version KCT8103L. 2026-03-06 14:19:07 +08:00
João Brázio 2e52efb209 Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants 2026-03-05 18:38:57 +00:00
João Brázio e8b758532c Rename sx126x_rx_boosted_gain to rx_boosted_gain 2026-03-05 18:14:47 +00:00
João Brázio a5dc732fb0 Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna 2026-03-05 17:21:38 +00:00
Scott Powell f4d1bfea18 * repeater: new "get/set loop.detect {off | minimal | moderate | strict }" 2026-03-05 16:26:09 +11:00
Liam Cottle ec5c82d6ab Merge pull request #1490 from mesher-de/feature-0hop-cli
Add CLI-command for zerohop advert
2026-03-05 15:24:48 +13:00
Liam Cottle 8d7d34fc4b Merge pull request #1001 from kallanreed/fix_gps_debug_logging
Use correct macro for GPS logging test
2026-03-05 13:14:37 +13:00
Wessel Nieboer 1bbe732c4c Sync time with GPS every 30 minutes
Unless your GPS is being spoofed there isn't really a downside to
syncing more often with GPS.

I understand the RTC is very stable, but especially with powersaving now
clock drift is worse, we should sync more often.
2026-03-03 15:44:55 +01:00
Liam Cottle 754e2dc2c5 Merge pull request #1841 from weebl2000/nit-prefs
prefs is 5 char length :nerd:
2026-03-04 01:39:55 +13:00
ripplebiz a1e1c4655f Merge pull request #1743 from weebl2000/fixagcreset
fix agc reset on SX126x, SX1276 & LR11x0 chips
2026-03-03 22:19:34 +11:00
Liam Cottle ee2387c0ac Merge pull request #1633 from weebl2000/fix/gps-uart-power-leak
Fix GPS UART consuming +8mA when disabled (nRF52)
2026-03-03 23:26:58 +13:00
Wouter BijenandClaude Opus 4.6 d6b1cb77e5 Clarify comment wording: 1 = direct (0 hops)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-03 08:40:17 +01:00
Wouter BijenandClaude Opus 4.6 79d0623e3c Address PR review: subtract-1 encoding and clamp max_hops
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-03 08:37:22 +01:00
Wouter BijenandClaude Opus 4.6 e20b41631b Add configurable max hops filter for auto-add contacts
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-02 20:41:41 +01:00
Daniel Novak fe2a286de8 Also fix countBefore(0xFFFFFFFF) to return _num
The signed comparison in countBefore breaks for the max uint32_t value.
Even though callers now use getOutboundTotal(), the function itself
should be correct for all inputs.
2026-03-01 07:41:50 +01:00
Wessel Nieboer 7d1ddfd312 Fix GPS +8mA power leak when disabled (nRF52)
On the T114, GPS_RESET (pin 38) is the same pin as PIN_3V3_EN.
MicroNMEALocationProvider::begin() sets pin 38 HIGH (powering the 3V3
rail) but stop() never set it back LOW, leaving the GPS module powered
even when disabled.

Assert reset pin in stop() to mirror begin(), and guard
_location->loop() behind gps_active check.

Fixes meshcore-dev/MeshCore#1628
2026-02-28 19:13:42 +01:00
Wessel Nieboer 8a2366043a fix comment, we know the band now after checking LR1110 user manual 2026-02-28 19:09:25 +01:00
Wessel Nieboer ce83dc9004 Calibrate configured frequency for AGC reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 4d2d9a55e4 Also implement LR11x10 AGC reset
Similar to SX126x but simpler.
2026-02-28 19:09:25 +01:00
Wessel Nieboer 72810274b8 make it more dry 2026-02-28 19:09:25 +01:00
Wessel Nieboer 4f625ad2e2 reset noise_floor sampling after agc reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 87e4f6784e when doing AGC reset, call Calibrate(0x7F)
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
2026-02-28 19:09:25 +01:00
Wessel Nieboer dd903eac41 fix agc reset 2026-02-28 19:09:25 +01:00
Wessel Nieboer 2f98ef7ddb prefs is 5 char length :nerd: 2026-02-28 19:07:38 +01:00
Daniel Novak 3c4d10f55c Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.

This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Daniel Novak 829bf5012d Fix countBefore sentinel regression from millis wraparound fix
PR #1795 changed PacketQueue::countBefore() to use signed 2's complement
arithmetic for millis wraparound safety. However, this broke the
0xFFFFFFFF sentinel pattern used by callers to mean "count all packets
regardless of schedule".

With the signed comparison, countBefore(0xFFFFFFFF) always returns 0,
causing hasPendingWork() to report false and repeaters to sleep with
packets still queued. Stats reporting also shows queue_len as 0.

Add an early-return for the sentinel value before the loop, and document
the sentinel convention on the virtual interface and implementation.
2026-02-28 16:22:58 +01:00
enricolorenzoni59 954a2d084b gps sync reply: fill buffer with text 2026-02-28 09:07:30 +00:00
Liam Cottle ae2d9c40cc Merge pull request #1569 from IoTThinks/MCdev-Fixed-Incorrect-Release-of-RefCountedDigitalPin
Fixed RefCountedDigitalPin.h and SSD1306Display for Heltec v4
2026-02-28 17:35:17 +13:00
Specter242 1dc7bb9680 sensecap solar: add poweroff command and board power/LED parity 2026-02-27 22:12:12 -05:00
João Brázio 75508ac10b Merge branch 'dev' into 2026/remote-lna 2026-02-27 10:32:14 +00:00
Scott Powell 7d913e45f4 * bug fix: Packet::writeTo(), Packet::readFrom() 2026-02-26 15:36:21 +11:00
lincomatic 4a9524915b don't limit bridge_baud to 115200 2026-02-25 07:52:42 -08:00
Scott Powell e25e0b87f9 * Packet::copyPath() fix 2026-02-25 17:10:31 +11:00