Commit Graph
1108 Commits
Author SHA1 Message Date
Alex Beal dc17bf149c Add an instance of ExternalWatchdogManager to Tower V2 2026-07-12 16:17:23 -06:00
Alex Beal 653bb4f892 Update #defines
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
2026-07-12 15:50:43 -06:00
Alex Beal 54ccedefdb Merge branch 'dev' into pr-1446 2026-07-12 15:44:28 -06:00
Wessel Nieboer 7966551627 fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers 2026-07-09 16:31:28 +02:00
Florent 3ea483560b fix tenstar c3 repeater build 2026-07-06 12:04:42 -04:00
Kevin Le 446e6b7d41 Fixed hibernate/powerOff for ESP32 boards to stay at uA 2026-07-05 23:47:27 +07:00
Kevin Le 18c1347b78 Cleanup Poweroff for NRF52 boards 2026-07-05 22:10:47 +07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Liam Cottle a2ae24e51f Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-06-27 11:32:10 +12:00
ViezeVingertjes f2a68a164f Add trailing underscore to nibble_screen_connect env names to exclude from automatic builds 2026-06-25 23:27:07 +02:00
ViezeVingertjes 3ba242894d Address review comments and sync with dev 2026-06-25 23:26:55 +02:00
ViezeVingertjes 2c5259f263 Remove NeoPixel configuration as its unused. 2026-06-25 23:26:55 +02:00
ViezeVingertjes 7407536366 Added support for the nibble zero connect 2026-06-25 23:26:55 +02:00
ripplebiz 02e48b2eb6 Merge pull request #2752 from Quency-D/heltec-tower-v2
Add Heltec tower v2
2026-06-23 11:51:03 +10:00
ripplebiz 76a003eac0 Merge pull request #2771 from oltaco/nrf52-framework-buildfix
Point Heltec Mesh Solar and Mesh Pocket at our NRF52 framework fork
2026-06-23 11:37:03 +10:00
Kevin Le 07b07995a5 Fixed GPS time sync for Heltec T114 2026-06-22 09:13:36 +07:00
taco c44f1b706d build fix for Heltec Mesh Solar and Mesh Pocket 2026-06-15 00:57:12 +10:00
Quency-D f2a332b6fc Fix low power consumption issues 2026-06-13 16:00:06 +08:00
Quency-D 487457465b Add maximum power limit 2026-06-12 18:05:27 +08:00
Quency-D 3517d26185 add tower v2 PA control 2026-06-12 17:58:19 +08:00
Quency-D b1bcb8f0df Merge pull request #13 from meshcore-dev/dev
merge Dev
2026-06-11 15:30:31 +08:00
Quency-D 606f8f1cc3 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell f7f8a331cd Merge branch 'dev'
# Conflicts:
#	docs/faq.md
2026-06-06 21:12:43 +10:00
ripplebiz e19984f26a Merge pull request #2684 from oltaco/rp2040-build-fixes
Build fixes for some RP2040 targets
2026-06-05 12:30:08 +10:00
taco 40111d3dcb build fixes for nibble_screen_connect and thinknode_m2 2026-06-05 00:55:02 +10:00
taco 653a52f31b build fix for rp2040 companion usb 2026-06-04 23:36:51 +10:00
taco a0d7f2b9e2 add missing radio_init() for rak11310 2026-06-04 23:30:50 +10:00
taco 2488de7dbd pin platform-raspberrypi to 4e22a0d
pins framework-arduinopico @ 1.50600.0+sha.6a1d13e9
2026-06-04 23:21:41 +10:00
taco 337e35b2ff build fixes for LilyGo T-Echo Card 2026-06-04 19:05:58 +10:00
ripplebiz cb497c50c2 Merge pull request #1687 from IoTThinks/MCdev-PowerSaving-for-all-esp32-repeaters-202602
Added PowerSaving for all ESP32-based repeaters
2026-06-04 13:31:51 +10:00
entr0p1 13228f60b8 Rak WisMesh Tag fixes
- Remove debug flag
- Correct lib_deps from rak4631 to rak_wismesh_tag
- Correct extends from rak4631 to rak_wismesh_tag
2026-06-02 16:17:08 +10:00
Florent a979cdb7a0 stm32: make subghz dep fix global and update framework 2026-06-01 08:39:09 +02:00
ripplebiz f485684499 Merge pull request #2650 from LeoCatsune/fix/wioe5mini
fix: update wio-e5-mini pio config to address SubGhz dependency issue
2026-06-01 15:59:47 +10:00
ripplebiz 633046c106 Merge pull request #2634 from NickDunklee/bme680-fixes-consolidation
feat: Integrate BME680 Bosch BSEC support for RAK4631
2026-06-01 13:35:32 +10:00
Leo f6d57b6453 fix: update wio-e5-mini pio config to address SubGhz dependency issue 2026-05-31 18:47:24 +10:00
Kevin Le 55a025f159 Moved LoRa GPIOs to platformio.ini for TBeam boards 2026-05-28 15:13:14 +07:00
Kevin Le 722cfb2254 Added getIRQGpio to return DIO0 for Lilygo TLoRa SX1276 2026-05-28 15:13:14 +07:00
Kevin Le 1eb38948cf Added getIRQGpio to return DIO0 for Lilygo T3S3 SX1276 2026-05-28 15:13:14 +07:00
Kevin Le 33f604dafe Fixed DIO0, DIO1 and RESET for Heltec v2 2026-05-28 15:13:14 +07:00
Nick Dunklee a54b11dd50 feat: Integrate BME680 Bosch BSEC support for RAK4631
This is a consolidation of my changes for BME680 on RAK4631 nodes.
I will close my other PRs related to this and link back to this one.

*Background on change:*

This change replaces the Adafruit BME680 driver on RAK4631 with the
Bosch BSEC library. Other boards continue to use the existing
Adafruit path via ENV_INCLUDE_BME680.

This makes the IAQ portion of the sensor functional, and more accurate.
It also contains the math and/or CayenneLPP fixes from my other PRs.
The Bosch code also appears to handle calibrating sensor aging as well,
whereas the Adafruit code is just looking at blind values that can drift
with time. Pretty cool to see this shooting out useful data!

RAK4631 platform.io is set to override to ENV_INCLUDE_BME680_BSEC while
leaving the Adafruit code for other node types. (If this becomes applicable
for other node types in future, awesome! I just don't have hardware
to test against.)

Using the BSEC library introduces IAQ sensor calibration, and saves
the calibration state periodically so it does not have to calibrate
again later.

At startup the IAQ sensor takes 30 minutes to heat and to hit a baseline,
then starts calibrating. Once calibrated, it will save those settings
and will only write settings again if calibration falls back and restores
back to state 3.

This fix also has the gas resistance math fix that was in
[pull 2146](https://github.com/meshcore-dev/MeshCore/pull/2146) so
the adafruit path also can at least show accurate values instead
of looping negative.

Also includes the fix from [pull 2149](https://github.com/meshcore-dev/MeshCore/pull/2149) so the pressure output isn't truncated to 1hPa steps.

*Fixes/Changes:*
- Add bsec_config_iaq[] with the 3.3V/3s-LP/28d calibration profile
- BSEC init applies setConfig() for voltage-correct heater targeting
- IAQ, heat-compensated temperature/humidity, pressure, and altitude
  reported over CayenneLPP
- IAQ accuracy reported as analog input over CayenneLPP (0,1,2,3)
- Calibration state persisted to /bsec_state.bin on nRF52 internal
  flash; written only when iaqAccuracy improves to >= 2, should
  keep write frequency well within flash endurance over device lifetime
- Fix non-BSEC query_bme680: float pressure division, addGenericSensor
  for gas resistance (was addAnalogInput, overflows at > 327 Ohm)
- loop() correctly gated for both GPS and BSEC-only builds
- Add fix_bsec_lib.py extra_script to resolve nRF52840 hard-float ABI
  mismatch in Bosch's PlatformIO packaging, silly Bosch

One general note outside of this code change: I noticed while BME680
_functions_ in companion nodes, since companion nodes run Bluetooth,
BLE preempts the CPU, and can do so mid-I2C-transaction.

This can cause the BME680 to see an anomaly and drop calibration and
start a recalibrate. This is behavior that will exist (and has existed)
regardless of using the Adafruit or Bosch paths.

This particular companion behavior does not seem to occur in sensor
or repeater nodes since their BLE is off. Probably affects other
I2C devices as well.

*Tests:*

- RAK19003
- RAK19007
- RAK19001
- repeater, sensor, companion
2026-05-27 15:33:48 -06:00
ripplebiz b655eb9b20 Merge pull request #2620 from jirogit/feat/kiss-modem-xiao-s3-v2
feat(xiao_s3): add kiss modem env
2026-05-25 12:00:46 +10:00
me e8fc488332 feat(xiao_s3): add kiss modem env 2026-05-24 14:03:28 -07:00
fdlamotte 3eebda66d0 Merge pull request #2235 from jirogit/fix/lr1110-rxgain-cli-guard
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
2026-05-24 11:56:23 +02:00
Liam Cottle 52ecab8f66 Merge pull request #2590 from jocasmark/fix/typos
Fix typos in comments and docs
2026-05-22 19:38:19 +12:00
taco 152c0c5069 fix debug params for t-echo card 2026-05-21 19:58:10 +10:00
taco d41d1da290 remove deprecated functions, fix typo and style 2026-05-21 19:58:10 +10:00
taco 19e4e662c4 add torch 2026-05-21 19:58:10 +10:00
taco 0abeb73f84 add tinyui for lilygo t-echo card 2026-05-21 19:58:10 +10:00
taco 2420925101 initial t-echo card support 2026-05-21 19:58:10 +10:00
Mark Jocas cacb5d8c2b Corrects typos and grammatical errors
Improves readability across documentation and inline comments by fixing common spelling mistakes and duplicate words.
2026-05-20 08:33:48 +02:00