João Brázio
f5ad70559a
Fix: Correct validation logic in isValidName function
2026-01-27 19:36:12 +00:00
Scott Powell
b9a2b21dd3
* new "clkreboot" CLI command
2026-01-27 15:22:18 +11:00
liamcottle
2fb315839c
increase maximum flood advert interval to 168 hours (7 days)
2026-01-26 23:05:10 +13:00
liamcottle
6cb97cca77
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
d32913a694
Merge pull request #1457 from oltaco/remote-set-prvkey
...
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
taco
a6ecec57f1
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
entr0p1
07316891fc
nRF52840 Power Management - Phase 1 - Boot Low VBAT Voltage Lockout
...
Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
2026-01-23 17:18:41 +11:00
Scott Powell
ef938653ff
* CommonCLI: added "set name ..." validation
...
* ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name
2026-01-09 16:28:08 +11:00
Scott Powell
3cc637c89d
* new ANON_REQ_TYPE_VER_OWNER
...
* CommonCLI: new "get/set owner.info ..."
2026-01-09 11:07:31 +11:00
Kevin Le
9fd1a7818d
Added pad after powersaving_enabled
2025-12-29 21:49:13 +07:00
Kevin Le
694e4df659
Added powersaving_enabled sanitization
...
Moved powersaving_enabled to match serialization order
2025-12-24 11:23:19 +07:00
Kevin Le
a1a7d10cae
Added powersaving to all ESP32 boards with RTC-supported DIO1
...
Added CLI to enable/disable powersaving
2025-12-23 12:48:08 +07:00
ripplebiz
a326bb5112
Merge pull request #1104 from zjs81/Fix-BW-setting-and-returning
...
Refactor float conversion in CommonCLI
2025-11-25 22:32:35 +11:00
taco
f5e8ab74f5
tweaks get/set adcMultiplier logic
2025-11-21 23:44:17 +11:00
taco
da55ff8936
Repeater: add adc.multiplier setting
2025-11-21 18:15:30 +11:00
zach
a495c43731
Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web
...
REPO:
1. Flash a repeater
2. Connect over lora
3. Set bw to 42.7 KHZ
It will revert back due to converting a double to a float.
REPO2:
1.Flash Repeater
2. Apply float fix
3. Set to say 20.8
4. try to get value via app or web cli repeater config
It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float
2025-11-14 21:51:28 -07:00
Stephan Rodemeier
822052cdca
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Florent
eb7d93ff91
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
778c2bfe9f
* new PAYLOAD_TYPE_CONTROL (11)
...
* repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only)
* node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )
2025-11-06 00:56:54 +11:00
ripplebiz
8f3ba9a9f2
Merge pull request #993 from recrof/allow_lower_bw_sf
...
allow saving spreading factor from 5 and bandwidth from 7.8kHz
2025-10-31 16:58:35 +11:00
Michael Hart
ed9f003c33
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
recrof
389b09cbec
allow spreading factor from 5 and bandwidth from 7.8kHz
2025-10-22 15:15:29 +02:00
Florent
8d54a107ec
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent
a578ffcfb7
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
Scott Powell
6e8eaedd8f
* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()
2025-10-12 12:49:26 +11:00
Scott Powell
5b5aabcafd
* Advert type fix
...
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
Florent
972b614f32
gps_cli: gps advert to control advert location policy
2025-10-11 19:00:02 +02:00
Florent
21ec6d6f41
gps_cli: set node location based on gps
2025-10-11 18:00:57 +02:00
Florent
c76d9a1c87
gpsCli: use parseTextParts
2025-10-11 15:29:17 +02:00
Florent de Lamotte
a53e608526
gps_cli: gps state is now saved and restored upon reboot
2025-10-06 15:12:03 +02:00
Florent de Lamotte
38f957c18b
Merge branch 'dev' into CommonCLI--gps-management
2025-10-06 14:26:05 +02:00
fdlamotte
766fbed3f5
Merge pull request #831 from Meshcore-Portugal/jbrazio/2025_87fe0ad8
...
Add bridge management CLI
2025-10-06 14:23:35 +02:00
Florent de Lamotte
8878f2cd06
sensor list command
2025-10-06 14:08:16 +02:00
Florent de Lamotte
85e4b84e64
cli_gps: remove callbacks and add generic sensor set/get.
2025-10-06 10:25:10 +02:00
Florent
062e355578
CommonCLI: gps management commands
2025-10-05 19:23:52 +02:00
João Brázio
707b00d10b
Add bridge type command to CLI for reporting bridge configuration
2025-10-05 11:48:05 +01:00
João Brázio
6c793a02f1
Bridge: enhance CLI configuration options
2025-10-03 00:20:09 +01:00
liamcottle
70011550ac
added 'board' cli command to get board name
2025-09-29 15:24:25 +13:00
João Brázio
0a7cbf5e41
Add bridge management CLI
2025-09-24 16:30:00 +01:00
Scott Powell
c1233511b3
* added CommonCLI::saveIdentity()
2025-09-01 15:22:11 +10:00
Scott Powell
1a158f8c2c
* agc.reset.interval rounding warning
2025-08-31 23:15:56 +10:00
Scott Powell
decebcbb3d
* minor compilation fix
2025-08-29 17:01:39 +10:00
liamcottle
d08644e769
add ability to remove neighbour via cli
2025-08-25 23:45:50 +12:00
Scott Powell
8bef2e75a6
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
Scott Powell
e7cfd3d64d
* CommonCLI: reverted "set radio ..." command, added new "tempradio ..." command
2025-07-23 22:04:47 +10:00
Scott Powell
22efc0e72f
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Scott Powell
51eae0bf6f
* CommonCLI: new "multi.acks" config setting
2025-07-16 18:51:18 +10:00
Scott Powell
25bde77afb
* implemented getter methods for telemetry value types
2025-07-08 23:19:35 +10:00
Scott Powell
8c56e9901f
* refactor: CommonCLI, processing of optional command prefix moved to handleCommand() call sites
...
* Sensor, anon_req now just for admin login (guest password now unused)
* special CLI command, "setperm {pubkey-hex} {permissions-int16}" for admin(s) to manage user access (permissions 0 = remove)
2025-07-08 23:19:35 +10:00
ripplebiz
236a65a4ca
Merge pull request #420 from 446564/feat-GH142
...
return range with advert interval setting error
2025-06-21 13:40:27 +10:00