Scott Powell
bece76210e
* ver 1.14.0
2026-03-06 12:20:04 +11:00
Scott Powell
9f1f1bcf47
* CommonCLI: added "get/set path.hash.mode "
2026-02-23 14:25:19 +11:00
Scott Powell
62320b64c5
* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
...
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Scott Powell
19e9551738
* ver 1.13.0
2026-02-15 17:24:37 +11:00
Wessel Nieboer
20e71ebc53
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Scott Powell
16dfed0353
* ver 1.12.0
2026-01-29 21:12:31 +11:00
liamcottle
c8992ae5b6
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
6cb97cca77
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
taco
a6ecec57f1
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
taco
447b4ca36c
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
taco
1df8dc9ef3
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
Scott Powell
dbce6c55fa
* ver 1.11.0
2025-11-30 18:32:10 +11:00
ripplebiz
de4aeebb1e
Merge pull request #1131 from wel97459/dev-uint
...
Changed uint used in flags to uint8_t
2025-11-25 21:51:36 +11:00
Scott Powell
bcb3007a97
* BUG FIX: same remote login fix as repeater
2025-11-25 15:09:51 +11:00
taco
ed4178fa96
add board.setAdcMultiplier to room server and sensor
2025-11-21 21:46:55 +11:00
Winston Lowe
0c4e3b7e59
Changed uint to a uint8_t
2025-11-20 21:58:42 -08:00
Scott Powell
f54d819269
* ver 1.10.0
2025-11-13 20:45:38 +11:00
ripplebiz
8e30aa6c7c
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
Florent
eb7d93ff91
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
0e95b123d8
* Sensor: DISCOVER_REQ, prefix_only support
2025-11-11 20:08:05 +11:00
Florent
fc6fe7c6ba
sensor: copy control data code from repeater
2025-11-06 22:36:37 +01:00
Scott Powell
bc98f96028
* repeater: onAnonDataRecv(), future code check bug fix (offset 4)
...
* sensor: onAnonDataRecv(), future request code provision
2025-11-06 20:22:40 +11:00
Scott Powell
7ff483ab74
* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days
2025-10-30 16:45:50 +11:00
Scott Powell
28ca26f691
* direct.txdelay default now 0.2 (was zero)
2025-10-30 00:03:10 +11:00
Michael Hart
ed9f003c33
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
Florent
8d54a107ec
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent
a578ffcfb7
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
Scott Powell
6e8eaedd8f
* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()
2025-10-12 12:49:26 +11:00
Scott Powell
5b5aabcafd
* Advert type fix
...
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
Florent
972b614f32
gps_cli: gps advert to control advert location policy
2025-10-11 19:00:02 +02:00
Florent de Lamotte
fefe01bf24
gps_cli: gps also restored on sensors and rooms
2025-10-06 15:30:18 +02:00
Scott Powell
3a8ad25437
* ver 1.9.1
2025-10-02 12:52:19 +10:00
Scott Powell
2f8adc198c
* ver 1.9.0
2025-09-28 19:24:00 +10:00
Scott Powell
d3ccef3845
* companion: disabled processing/sending of keep_alive packets (deprecated)
...
* FIRMWARE_VER_LEVEL now moved to end of response payloads
2025-09-25 09:39:11 +10:00
Scott Powell
7f14915350
* Login response payload: now includes FIRMWARE_VER_LEVEL
2025-09-25 09:07:59 +10:00
Scott Powell
a0d6f8348b
* refactor: moved ACL out of SensorMesh -> ClientACL
2025-09-12 15:35:31 +10:00
Scott Powell
2aafb1ab4f
* ver bump
2025-09-01 19:32:15 +10:00
Scott Powell
c1233511b3
* added CommonCLI::saveIdentity()
2025-09-01 15:22:11 +10:00
Scott Powell
f163e14ffd
* ver bump
2025-08-31 23:42:15 +10:00
Florent
28bedf9575
SensorMesh: add the possibility to receive msgs from admin
2025-08-27 21:19:12 +02:00
Scott Powell
8bef2e75a6
* new CommonCLI commands: "get prv.key", "set prv.key {hex}"
2025-08-01 19:28:44 +10:00
ripplebiz
d74482f061
Merge pull request #547 from fdlamotte/sensors_gpio
...
sensors: gpio command
2025-08-01 19:06:44 +10:00
Scott Powell
36cfc506ca
* REQ_TYPE_GET_TELEMETRY_DATA, first reserved byte (of 4) is now inverse mask to apply to permissions
2025-07-31 13:45:53 +10:00
Scott Powell
02e89aafa4
* ver bump to 1.7.4
2025-07-24 20:30:35 +10:00
Scott Powell
22efc0e72f
* CommonCLI: "set radio " now with optional 5th param timeout_mins, for applying temporary radio params for that many mins
...
* "advert" command now with longer delay, so that CLI reply is sent first
2025-07-23 21:40:37 +10:00
Florent
da9d2e3591
sensors: gpio apply masks
2025-07-23 08:02:57 +02:00
Florent
c320999283
sensors: gpio command
2025-07-22 21:08:15 +02:00
Scott Powell
bd35daf4ca
* sensor: "setperm {pubkey-hex} 0" command can now remove by partial pubkey
...
* sensor: login with blank password now just checks if sender is in ACL, and returns permissions (if so)
2025-07-16 21:16:05 +10:00
Scott Powell
6e07e6fec5
* Sensor permission levels renamed. Misc sensor fixes.
2025-07-16 14:18:05 +10:00
Scott Powell
f5f03ef00e
* simple_sensor: redesigned permissions
...
* companion: PUSH_CODE_LOGIN_SUCCESS now has extra byte in frame for ACL permissions
2025-07-15 15:05:38 +10:00