Scott Powell
19e9551738
* ver 1.13.0
2026-02-15 17:24:37 +11:00
ripplebiz
6860b207f6
Merge pull request #1672 from ChaoticLeah/feature/mute-buzzer-icon
...
Add muted icon to show when buzzer is muted
2026-02-15 15:54:33 +11:00
Scott Powell
d3f378342c
* client_repeat state now in _DEVICE_INFO response
2026-02-14 16:45:41 +11:00
Scott Powell
9c0282016f
* companion client repeat mode support
2026-02-14 15:50:06 +11:00
Leah
61a8a69a46
Add muted icon to show when buzzer is muted
2026-02-11 10:00:20 +01:00
liamcottle
0f77b88679
fix estimated timeout for multi byte path traces
2026-02-10 17:01:30 +13:00
ripplebiz
7571558af5
Merge pull request #1605 from ViezeVingertjes/kiss-modem-spec-compliance
...
Kiss modem spec compliance
2026-02-09 16:45:20 +11:00
ripplebiz
8d422a084e
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
fce56dae50
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer
8f40193db2
Parse as signed int
2026-02-07 16:58:06 +01:00
agessaman
8669314fce
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
Wessel Nieboer
dd97d863f4
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
ViezeVingertjes
484ef3b302
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
2c6d625921
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
85410e85e3
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
f95d348c7a
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
8a6173a255
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
318452b0b0
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
82ca66a6a8
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
cdc25aeff4
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
c5c5956916
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
48e60ed57f
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
ripplebiz
e2eadcb3f1
Merge pull request #1596 from jbrazio/2026/t114-sensors
...
Refactor Heltec T114 sensor management
2026-02-07 14:17:15 +11:00
ripplebiz
6cac3d6e4f
Merge pull request #1591 from agessaman/fix-kiss-noise-floor
...
fix(kiss): periodic noise floor calibration and AGC reset
2026-02-07 14:08:26 +11:00
Wessel Nieboer
20e71ebc53
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Adam Gessaman
c354f8202c
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
João Brázio
b8ce314278
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
0b822284be
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
ripplebiz
5ebfac4982
Merge pull request #1562 from oltaco/nrf52-sleep-repeater
...
Add Low-Power Sleep for nRF52 Boards
2026-02-05 13:16:47 +11:00
ripplebiz
a1ddfec6e4
Merge pull request #1532 from oltaco/esp32board.h-removewifi
...
Refactor ESP32Board.h to save ~500 bytes of DRAM
2026-02-05 13:09:04 +11:00
agessaman
b04321f3b8
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
taco
ea085401ac
refactor ui with ring buffer and display most recent
2026-02-04 09:38:05 +11:00
ripplebiz
9c7246b664
Merge pull request #1545 from ViezeVingertjes/kiss-modem-firmware
...
Add KISS-like Modem example and protocol documentation
2026-02-03 12:33:19 +11:00
ViezeVingertjes
d0e6cea382
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
taco
8c9ce15f66
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
ViezeVingertjes
3171696de5
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
b04f33bd34
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
taco
348a0cfd8d
add makeBlobPath inline helper for esp32
2026-02-01 00:02:30 +11:00
taco
518b651b57
add DataStore::deleteBlobByKey()
2026-02-01 00:02:29 +11:00
ViezeVingertjes
a5ad202218
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00
Liam Cottle
e8a11511bc
Merge pull request #1531 from agessaman/add-recv-errors-stats
...
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
2026-01-30 20:57:07 +13:00
agessaman
62ec1b5f25
Add recv_errors to CMD_GET_STATS STATS_TYPE_PACKETS response
...
Append uint32_t recv_errors (RadioLib receive/CRC errors) to packet stats
binary frame. Frame size 26 -> 30 bytes. Update stats_binary_frames.md and
Python/TypeScript parsing examples for backward compatibility (accept >=26).
2026-01-29 20:44:11 -08:00
taco
e36ca64f00
fix: remove esp_wifi.h from esp32board.h
...
saves ~500 bytes of dram and allows Tbeam to compile again
2026-01-30 15:07:40 +11:00
ripplebiz
d17540ad88
Merge pull request #1509 from stevenlafl/tbeam-1w
...
Add LilyGO T-Beam 1W Support
2026-01-30 14:55:17 +11:00
Rastislav Vysoky
fe2632bcc4
Revert "Remove _serial->isConnected() logic from buzzer notifications"
2026-01-30 00:12:04 +01:00
Scott Powell
16dfed0353
* ver 1.12.0
2026-01-29 21:12:31 +11:00
Steven Linn
f866b484aa
Add battery min/max voltage parameter support
2026-01-28 22:24:49 -07:00
ripplebiz
dd21b64fb3
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper
9dbda71566
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
liamcottle
c8992ae5b6
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00