btmon shows the disconnects are HCI reason 0x3E (Connection Failed to be
Established / lost sync), not supervision timeout -- so widening the timeout
didn't help. The mast link is weak (RSSI -75..-90) and the node is busy with
LoRa; with slave latency 4 the peripheral may skip connection events, so the
central loses sync and reports 0x3E. Respond on every event (latency 0) to
maximise sync on a weak/busy link.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
6 s cut the reconnect churn from every 15-30 s to every ~60 s but didn't
eliminate it: under the bridge's real polling load the node shows a
periodic multi-second stall (advert TX airtime / SoftDevice-LoRa
coexistence) that occasionally exceeds 6 s. Widen the supervision timeout
to 16 s so those stalls are tolerated; a genuine freeze is still caught by
the 20 s hardware watchdog (16 s < 20 s).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The BLE console link dropped every ~15-30 s and the bridge kept
reconnecting. Root cause: Bluefruit's default supervision timeout is only
2 s, and this repeater relays heavy LoRa flood traffic, so main-loop /
radio coexistence stalls past 2 s and the central tears down the link.
Mirror the companion's proven approach (explicit sd_ble_gap_conn_param_update
on 'secured', since some centrals ignore the advertised PPCP) but widen the
supervision timeout to 6 s (a repeater is far busier than a client), with a
15-30 ms interval and slave latency 4. PPCP is also set before advertising.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Repeater can be queried over BLE Nordic-UART (advert/neighbours/stats) without USB. Fix SoftDevice-protected TEMP peripheral access (sd_temp_get) that crashed BLE repeater telemetry, add USB-connected detection to ArduinoSerialInterface, and adjust the nRF52 ldscript/extra FS.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
This commit refactors the serial bridge functionality out of the `simple_repeater` example and into a more reusable, object-oriented structure.
An `AbstractBridge` interface has been introduced, along with a concrete `SerialBridge` implementation. This encapsulates all the logic for packet framing, checksum calculation, and serial communication, cleaning up the main example file significantly.
The `simple_repeater` example now instantiates and uses the `SerialBridge` class, resulting in better separation of concerns and improved code organization.