Commit Graph
54 Commits
Author SHA1 Message Date
Scott Powell f4740815db * Room Server post ACK bug fix! 2025-03-06 18:16:48 +11:00
Alex Wolden 8d09e0f5c0 Merge remote-tracking branch 'origin/dev' into awolden/t3lora 2025-03-04 23:23:03 -08:00
Alex Wolden 22b3d7c435 Refactor naming 2025-03-04 22:00:48 -08:00
Scott Powell cb2211e1ca * repeater and room server: CommonCLI now handles load/save of Prefs. Now sanitise bad prefs values. 2025-03-05 16:39:45 +11:00
Scott Powell ea6f0bfaa5 * basic UITask added to repeater and room server (only HeltecV3 targets enable so far) 2025-03-05 12:52:29 +11:00
Alex Wolden 30e0047809 Add support for LilyGo T3 with SX1276 module
- Add custom partition table for fitting larger firmware
- Create LilyGoT3S3Board.h for board-specific functionality
- Update all example files to support the T3 board with SX1276
- Configure build environment for optimizing firmware size
- Set up the right pin configuration for SX1276 on LilyGo T3
2025-03-04 00:07:36 -08:00
Scott Powell db5b44e546 * room server: adding post, was not sending Acks on retries.
* room server and repeater: now does NOT send Acks for TXT_TYPE_CLI_DATA commands
2025-03-03 15:30:50 +11:00
Scott Powell e5b701a97b * Semantic versioning in repeater, room server. "ver" CLI command changed. 2025-03-03 13:22:49 +11:00
Scott Powell 48ca4ab772 * companion radio: connection status now supported (Keep_alive pings, etc) 2025-03-02 20:15:13 +11:00
Scott Powell 19ad023fc5 * room server: login response, permission byte now returned 2025-03-02 14:19:19 +11:00
Scott Powell 7c063806d9 * repeater, room server: new prefs: sf, cr, bw. "set tx ..." now instant, no reboot needed. 2025-02-28 11:48:46 +11:00
Scott Powell 3df3aac8ab * refactored handleCommand() to CommonCLI class 2025-02-27 17:00:44 +11:00
Scott Powell aab1326516 * various changes for CLI support via companion radio 2025-02-27 12:51:00 +11:00
Scott Powell 7c1c273255 * new Dispatcher::getCADFailRetryDelay() 2025-02-27 04:05:50 +11:00
Scott Powell 9bb9e989fa * new helper: AutoDiscoverRTCClock, which detects: DS3231 (on i2c addr 0x68), or RV3028 (on i2c addr 0x52)
* repeater and room server: ver bump (v5), now use AutoDiscoverRTCClock
* various Board::begin() now should do Wire.begin(), with custom pin mappings if needed
* examples removed: ping client/server, and test_admin
2025-02-25 19:00:07 +11:00
Scott Powell b4b9705c7d * repeater and room server: login password now using strcmp(), new 'set direct.txdelay ..' config 2025-02-24 20:52:13 +11:00
Scott Powell 395b026e6c * strncpy() refactor/fix 2025-02-22 19:41:24 +11:00
Scott Powell 4bf16344cd * added S3 WIO target for BLE companion radio 2025-02-22 10:44:45 +11:00
Scott Powell fa13ef1969 * room server: minor timing fix 2025-02-20 22:59:47 +11:00
Scott Powell 159c4ce8c2 * Mesh/Dispatcher: MESH_DEBUG_ and MESH_PACKET_LOGGING now output date-time. (new getLogDateTime() virtual)
* MESH_PACKET_LOGGING now parity with dynamic/file logging (src/dest hashes)
2025-02-20 12:41:47 +11:00
Scott Powell e32003f8a3 * added RTCClock::getCurrentTimeUnique(), for when timestamps need to be unique (if temp rapid-fire) 2025-02-19 17:24:25 +11:00
Scott Powell ce20ec8f13 * repeater, room server and terminal chat: default to rxdelay off 2025-02-17 10:56:41 +11:00
Scott Powell edf52ad4f3 * companion radio: new CMD_SHARE_CONTACT
* room server: push notify loop interval changed to 2 secs
2025-02-15 13:23:19 +11:00
Scott Powell a06f5a8407 * ver bumps
* companion radio, USB: onSendTimeout() bug fix
2025-02-14 09:35:15 +11:00
Scott Powell 1762662419 Merge branch 'main' into rx_delay
# Conflicts:
#	examples/simple_repeater/main.cpp
#	examples/simple_room_server/main.cpp
2025-02-10 20:13:09 +11:00
Scott Powell 36a00175f4 * new "set guest.password .." CLI command 2025-02-10 16:36:14 +11:00
Scott Powell f5cd4333fd Merge branch 'main' into rx_delay
# Conflicts:
#	examples/simple_repeater/main.cpp
#	examples/simple_room_server/main.cpp
2025-02-08 12:04:17 +11:00
Scott Powell e05aa5da67 * repeater and room server: new CLI command: "set advert.interval {mins}" 2025-02-08 11:44:09 +11:00
Scott Powell e140649e4d * bug fix for rxdelay 0 2025-02-06 11:16:17 +11:00
Scott Powell 9bc8494bf8 * new CLI command: "set txdelay ..." 2025-02-05 12:36:32 +11:00
Scott Powell d0f7e351aa Merge branch 'main' into rx_delay
# Conflicts:
#	examples/simple_repeater/main.cpp
#	examples/simple_room_server/main.cpp
2025-02-04 20:53:27 +11:00
Scott Powell 2603c5272f * repeater and room server, new "set repeat {on|off}" CLI command 2025-02-04 18:27:13 +11:00
Scott Powell f10cdb0a3d Merge branch 'main' into rx_delay 2025-02-04 16:03:32 +11:00
Scott Powell 91ef5bbfa8 * Room server: added "start ota" CLI command 2025-02-04 16:03:17 +11:00
Scott Powell 04716c817c * new "set rxdelay ..." CLI command 2025-02-04 15:35:36 +11:00
Scott Powell 547cb0f734 * ver bumps
* RAK battery experiment
2025-02-04 13:40:54 +11:00
Scott Powell 63381dac25 * new RX delays based on SNR 2025-02-04 12:35:53 +11:00
Scott Powell 1369a3c127 * IdentityStore::save() was failing on RAK.
* Repeater: CLI 'erase' command added.
2025-02-04 01:35:04 +11:00
Scott Powell 12012a517f * refactor: new helpers/nrf52 dir
* RAK, startOTAUpdate()
2025-02-03 12:53:38 +11:00
Scott Powell db9f6d7ba0 * BUG FIX: Initial key generation 2025-02-02 11:03:23 +11:00
Scott Powell 60f0ff4642 * repeater and room server: added "set tx .." CLI command 2025-02-02 08:45:18 +11:00
Scott Powell 8044d92c40 * ver bump 2025-01-31 00:47:26 +11:00
Scott Powell 0177d4dbd4 * Room server: keep_alive changes 2025-01-31 00:02:29 +11:00
Scott Powell 55f7ed31f1 * Room server: no more "[posted]" replies from server 2025-01-30 20:09:00 +11:00
Scott Powell f94d5f7423 * ver bumps 2025-01-30 13:46:04 +11:00
Scott Powell 659e66e3d1 * reset push_failures on successfully recv 2025-01-29 20:45:55 +11:00
Scott Powell 2e3d2d13b2 * room_server: login response now with a 'keep alive' interval suggestion
* room_server: new Request payload sub-type: REQ_TYPE_KEEP_ALIVE -> RESP_SERVER_KEEP_ALIVE
2025-01-29 13:14:42 +11:00
Scott Powell 52f9c358b7 * repeater: extra CLI commands
* room server: now loads/saves prefs, same CLI commands as repeater ("set ...")
2025-01-28 00:00:14 +11:00
Scott Powell 9a9b4fca82 * version bumps 2025-01-27 00:42:42 +11:00
Scott Powell 6c00653272 * TxtDataHelpers.h, with standard TXT sub-types
* Terminal chat: added "time <epoch-secs>"
* repeater: now recognises either TXT_TYPE_PLAIN or TXT_TYPE_CLI_DATA for CLI commands
* Room server: now uses TXT_TYPE_SIGNED_PLAIN (for push/outbound), recognises TXT_TYPE_PLAIN (to add a Post), and TXT_TYPE_CLI_DATA for CLI command
2025-01-26 22:56:38 +11:00