Konflikty:
- ESP32Board.h: upstream obnovuje čas z RTC backupu přes všechny resety;
záchytná hodnota je teď novější z FIRMWARE_BUILD_EPOCH (náš stamping)
a RTC_TIME_MIN.
- t1000-e: upstream sloučil sleep_gps() do stop_gps() (drží VRTC + Airoha
RTC backup sleep) ⇒ gps duty používá stop_gps(), sleep_gps() zrušen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
58 commitů upstreamu nad v1.17.1. Šest konfliktů, všechny ručně:
- `src/helpers/radiolib/RadioLibWrappers.cpp` — OBOJE. Upstream `aa229245`
přidává `idle()` před `setOutputPower()` na LR2021 (tam jsou to standby-only
příkazy a přijímač se sám nevrátí do Rx); naše část si dál drží návratový
status, aby „rádio to odmítlo" a „rádio to změnilo" nevypadaly z konzole
stejně. Nezávislé věci, obě zůstávají.
- `src/helpers/CommonCLI.cpp` — VERZE UPSTREAMU. Celý blok `radio`,
`radio.rxgain` a `radio.fem.*` byl čistě upstreamový kód (diff proti merge
base v té oblasti je prázdný) a upstream ho přestěhoval do nového
`CommonRadioPrefs`; FEM příkazy zrušil ve prospěch per-variant klíčů
`fem_rxgain`/`fem_txgain`.
- `examples/simple_repeater/MyMesh.h` — NAŠE + úklid. `static_assert` na
64bajtový wire formát `RepeaterStats` zůstává, `MAX_CLIENTS` odsud mizí:
`1a8d860d` ho centralizoval do `helpers/ClientACL.h`, který je tu už
includovaný.
- `examples/simple_repeater/MyMesh.cpp` — NAŠE. Konflikt byl falešný (upstream
ten řádek nemění), jde o naše dva countery `tx_start_fail`/`tx_timeout`.
- `examples/companion_radio/ui-new/UITask.cpp` — OBOJE. Upstream přidal větve
pro `UI_SHOW_CLOCK`, my podmínku `_task->isBluetoothEnabled()`, aby displej
nenabízel PIN k párování, které není jak navázat.
- `platformio.ini` — OBOJE. Vedle našeho symlinku na lokální nRF52 framework
přibyl upstreamový `toolchain-gccarmnoneeabi@^1.140201.0`.
Navíc: `[env:native_asan]` musel dostat `DynamicConfigSerializer.cpp` do
`build_src_filter`. Merge ho přidal jen do `[env:native]` a ASAN env pak padal
na undefined reference — což vypadá jako nález sanitizeru a je to jen chybějící
překladová jednotka. Ty dva envy musí zůstat v zákrytu.
Ověřeno: `pio test -e native` i `-e native_asan` 53/53, a čtyři envy, které
skutečně flashujeme, se přeloží (Xiao repeater / companion_radio_usb /
kiss_modem, t1000e_companion_radio_ble).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Small one after v1.17.0: 57 files, +825/-200, and it merged with no conflicts at
all. Unlike 1.17.0, the release tags sit directly on origin/main, so no
`-s ours` is needed for git describe to see the release.
What matters for our nodes:
* fix-rxgain-setting-post-agc-reset -- rx gain no longer resets after an AGC
adjustment. The release notes ask repeater admins to verify radio.rxgain (and
the new radio.fem.rxgain) after updating, so that goes on the post-flash list.
* NRF52 CC310 crypto is initialised once instead of on every call, and several
NRF52 pin maps were corrected.
* New 'get/set radio.fem.rxgain/txgain' CLI commands (companion cannot configure
them yet).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Upstream shipped companion/repeater/room-server v1.17.0 today; its tree is
identical to origin/main, so that is what this merges. Our base was 7 Jul
(7b566670), i.e. 350 files / +11k lines of upstream behind.
Conflicts and how they were settled:
* Mesh.cpp -- upstream split the dedup into wasSeen() + explicit markSeen().
Kept BOTH: their new call pair AND our payload-length bound on the TRACE
path-hash read, which is what stops a crafted short TRACE from steering
isHashMatch() past the buffer.
* companion_radio/main.cpp -- upstream grew its own MultiSerialInterface
(BLE + USB + WiFi + Ethernet registered side by side), which is a superset
of the SerialDualInterface we backported from PR #1779. Took theirs whole;
our copy is now dead code. NOTE: envs that relied on the backport for a USB
console alongside BLE now need an explicit -D ENABLE_USB_INTERFACE.
* ui-new/UITask.cpp -- isSerialEnabled() was renamed isBluetoothEnabled()
upstream and DisplayDriver::RED became UIColor::warning_txt. Same intent
either way: no BT pin on screen while Bluetooth is off.
* EnvironmentSensorManager.cpp -- upstream fixed the millis() wrap on the GPS
update timer in the exact line our gpsDutyLoop() call sits on. Kept both,
with their wrap-safe compare.
* NRF52Board.cpp -- upstream independently arrived at the same sd_temp_get()
fix for SoftDevice-protected TEMP. Took their form, kept our comment, which
is the only place recording WHY (APP_MEMACC fault -> reboot on telemetry).
* RadioLibWrappers.{h,cpp}, simple_repeater/main.cpp -- add/add. Their
configSideDetectors()/performChannelScan()/external watchdog next to our
irqDoneMask()/probeDio1()/BLE pump/WDT feed. The repeater console keeps the
1032-byte reply buffer for paged analyzer output and now clears it, since a
static buffer would otherwise reprint the previous reply.
* .vscode/extensions.json -- deleted upstream, and it is in .gitignore; our
only change was a comment. Gone.
Built clean: Xiao_x1_rpt, Xiao_x2_cmp, Xiao_x3_obs, SenseCap_s1_rpt,
T1000E_cmp_cz. Not flashed to anything yet.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The `recv_pkt_region` is set when processing a flood packet in `filterRecvFloodPacket`
but direct/non-flood packets would never pass through that function, so the pointer was
not cleared for them.
`sendFloodReply` would then later use it blindly, which meant that the response would
either inherit the region from the last flood packet, or refer to a non-initialised pointer
if no region floods had been received yet.
Before this commit, there was no way to set a different max hop count
for unscoped messages.
Now with this change, by defaul it tracks the flood.max setting, until
a user provides a flood.max.unscoped value, which tax precidence for
packets if ROUTE_TYPE_FLOOD is true.