Commit Graph
289 Commits
Author SHA1 Message Date
Ryan GreggandClaude Opus 4.6 26c576b014 Merge upstream/dev into rak-ethernet
Resolve conflicts: keep both Ethernet CLI and SenseCAP power-off
button code in repeater, keep both Ethernet docs and power management
CLI docs.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-13 11:07:09 -07:00
Ryan GreggandClaude Opus 4.6 2afeb07beb Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code
The Ethernet retry loop in repeater and room server checked
hardwareStatus() and linkStatus() before calling Ethernet.begin(),
which always returned EthernetNoHardware since hardware detection
only happens during begin(). Extract shared Ethernet CLI code into
EthernetCLI.h to prevent future divergence. Also fix time_t type
mismatch in companion radio Ethernet init.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-13 10:48:42 -07:00
Scott Powell 09bba14d96 Merge branch 'main' into dev 2026-03-12 18:14:56 +11:00
ripplebiz abee981012 Merge pull request #1873 from Specter242/codex/sensecap-solar-led-poweroff-parity
sensecap solar: add poweroff/shutdown support and nrf52 PM parity
2026-03-12 18:13:14 +11:00
Ryan GreggandClaude Sonnet 4.6 062be045f3 Address PR review feedback from liamcottle (second round)
- Rename eth command to eth.status for consistency with other commands
- Rename generateDeviceMac to generateEthernetMac for clarity
- Refactor ethernet_handle_command to return false by default
- Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface)
- Boot companion radio without Ethernet on init failure (LoRa-only recovery mode)
- Remove > prompt from ethernet CLI for consistency with serial interface
- Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined
- Fix TCP socket leak when duplicate client detection fires
- Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface
- Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio)
- Clarify eth.status command is only available in repeater and room server firmware

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-11 12:43:08 -07:00
Ryan Gregg 359832ab5b Updates based on PR review feedback from liamcottle 2026-03-10 22:35:31 -07:00
Ryan GreggandClaude Opus 4.6 d0d415d5f6 Add native Ethernet support for RAK4631 repeater, room server, and companion
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.

- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
  and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-10 20:43:59 -07:00
ripplebiz 71e1e63dfd Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
ripplebiz 1391fda85b Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Scott Powell bece76210e * ver 1.14.0 2026-03-06 12:20:04 +11:00
Scott Powell afbd45b26e * LOOP_DETECT_MODERATE bug fix 2026-03-05 17:38:51 +11:00
Scott Powell f4d1bfea18 * repeater: new "get/set loop.detect {off | minimal | moderate | strict }" 2026-03-05 16:26:09 +11:00
Daniel Novak 3c4d10f55c Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.

This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Specter242 ed3e413a54 sensecap solar: stabilize wake pin and add button hold poweroff 2026-02-27 22:51:19 -05:00
Scott Powell 9f1f1bcf47 * CommonCLI: added "get/set path.hash.mode " 2026-02-23 14:25:19 +11:00
Scott Powell 62320b64c5 * refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Liam Cottle 5747181336 Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 23:53:28 +13:00
Scott Powell e0384e5dd8 * repeater: slight increase to default direct.txdelay 2026-02-17 20:10:13 +11:00
3DPGG 53e92916d9 Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.

The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.

As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
realtag f3462587bc Allow repeater discovery even if repeater mode is disabled on the requesting repeater. 2026-02-17 01:39:04 +00:00
realtag 3cb907f6c8 Increased the timeout timer to 60 seconds, up from 30 seconds. 2026-02-17 01:22:17 +00:00
realtag bdae8823b5 discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses 2026-02-17 01:04:14 +00:00
realtag ff208504b7 discover sends a single repeater discovery request and populates the neighbor list; self is excluded 2026-02-17 00:41:24 +00:00
Scott Powell 19e9551738 * ver 1.13.0 2026-02-15 17:24:37 +11:00
ripplebiz 8d422a084e Merge pull request #1609 from weebl2000/bridge-always-has-work
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle fce56dae50 Merge pull request #1316 from weebl2000/allow-negative-tx
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer dd97d863f4 Bridge always has work (prevents sleep) 2026-02-07 15:39:24 +01:00
Wessel Nieboer 20e71ebc53 Allow negative tx power
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
João Brázio b8ce314278 Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors 2026-02-05 13:36:22 +00:00
João Brázio 0b822284be Refactor Heltec T114 sensor management 2026-02-05 13:35:04 +00:00
taco 8c9ce15f66 nrf52: allow repeater to sleep when idle 2026-02-01 14:51:27 +11:00
Scott Powell 16dfed0353 * ver 1.12.0 2026-01-29 21:12:31 +11:00
ripplebiz dd21b64fb3 Merge pull request #1476 from mattzzw/region_via_LoRa
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper 9dbda71566 Add output of region cmd via lora cli
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
liamcottle c8992ae5b6 added build flag to enable/disable boot advert 2026-01-26 22:39:39 +13:00
liamcottle 6cb97cca77 boot adverts are now zero hop instead of flood 2026-01-26 22:20:36 +13:00
ripplebiz 0d6d2b9b9f Merge pull request #1477 from Cisien/dev
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
Chris 834d2ff6dd Expose a counter to track RadioLib receive errors
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
taco a6ecec57f1 allow set prv.key from remote, validate new prv.key 2026-01-25 01:32:48 +11:00
taco 447b4ca36c recalc ClientACL shared_secrets at startup 2026-01-25 01:32:44 +11:00
taco 1df8dc9ef3 refactor ClientACL and CommonCLI, add ClientACL::clear() 2026-01-25 01:31:53 +11:00
Scott Powell 506c2912dc * repeater login response, FIRMWARE_VER_LEVEL now bumped to 2 2026-01-12 17:47:51 +11:00
Scott Powell d9f8c78e7f * new req/resp (after login): REQ_TYPE_GET_OWNER_INFO (includes firmware-ver)
* ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit)
* ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits
* CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set
2026-01-12 16:58:35 +11:00
Scott Powell e30db48877 * ANON_REQ_TYPE_VER_OWNER now delimited by newline chars 2026-01-09 16:32:08 +11:00
Scott Powell ef938653ff * CommonCLI: added "set name ..." validation
* ANON_REQ_TYPE_VER_OWNER, now removes commas from node_name
2026-01-09 16:28:08 +11:00
Scott Powell 460f3b5abe * new ANON_REQ_TYPE_VER (for just simple clock + ver info) 2026-01-09 13:54:18 +11:00
Scott Powell 546774a96f * ANON_REQ_TYPE_VER_OWNER, now includes node_name 2026-01-09 13:20:20 +11:00
Scott Powell 3cc637c89d * new ANON_REQ_TYPE_VER_OWNER
* CommonCLI: new "get/set owner.info ..."
2026-01-09 11:07:31 +11:00
Scott Powell f258b7e3b3 * ANON_REQ_TYPE_REGIONS now direct only, with reply_path encoded in request 2026-01-08 13:20:52 +11:00
ViezeVingertjes 40a09e9450 Implement token bucket duty cycle enforcement 2026-01-04 21:33:46 +01:00