Commit Graph
199 Commits
Author SHA1 Message Date
Ryan GreggandClaude Opus 4.6 2afeb07beb Fix Ethernet init checking hardwareStatus before begin() and deduplicate CLI code
The Ethernet retry loop in repeater and room server checked
hardwareStatus() and linkStatus() before calling Ethernet.begin(),
which always returned EthernetNoHardware since hardware detection
only happens during begin(). Extract shared Ethernet CLI code into
EthernetCLI.h to prevent future divergence. Also fix time_t type
mismatch in companion radio Ethernet init.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-13 10:48:42 -07:00
Ryan GreggandClaude Sonnet 4.6 062be045f3 Address PR review feedback from liamcottle (second round)
- Rename eth command to eth.status for consistency with other commands
- Rename generateDeviceMac to generateEthernetMac for clarity
- Refactor ethernet_handle_command to return false by default
- Allow new TCP clients to replace existing connections (repeater, room server, SerialEthernetInterface)
- Boot companion radio without Ethernet on init failure (LoRa-only recovery mode)
- Remove > prompt from ethernet CLI for consistency with serial interface
- Fix variable redeclaration compile error in SerialEthernetInterface when ETHERNET_STATIC_IP is defined
- Fix TCP socket leak when duplicate client detection fires
- Remove dead recv_queue and adv_restart_time members from SerialEthernetInterface
- Fix port numbers in docs (port 23 for repeater/room server CLI, port 5000 for companion radio)
- Clarify eth.status command is only available in repeater and room server firmware

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-11 12:43:08 -07:00
Ryan Gregg 359832ab5b Updates based on PR review feedback from liamcottle 2026-03-10 22:35:31 -07:00
Ryan GreggandClaude Opus 4.6 d0d415d5f6 Add native Ethernet support for RAK4631 repeater, room server, and companion
Add W5100S Ethernet adapter support for RAK4631-based firmware, enabling
TCP CLI access on port 23 as an alternative to BLE/Serial connections.

- New SerialEthernetInterface for nRF52 with DHCP, reconnection handling,
  and shared WB_IO2 power pin management with GPS module
- Ethernet build targets for repeater, room server, and companion firmware
- Prevent GPS from toggling WB_IO2 when Ethernet module is active
- CI build check for all three ETH firmware targets

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
2026-03-10 20:43:59 -07:00
ripplebiz 71e1e63dfd Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
ripplebiz 1391fda85b Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Scott Powell bece76210e * ver 1.14.0 2026-03-06 12:20:04 +11:00
Daniel Novak 3c4d10f55c Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.

This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Scott Powell 1d845c9e0f * room server fix 2026-02-24 01:08:11 +11:00
Scott Powell 1754d0d328 * companion: new pref: path_hash_mode (0..2)
* companion: new field in CMD_SET_OTHER_PARAMS, path_hash_mode
* companion: CMD_SEND_SELF_ADVERT, cmd_frame[1] now holds the path hash size (0 = zero hop, 1..3 = flood path hash size)
2026-02-23 18:26:56 +11:00
Scott Powell 9f1f1bcf47 * CommonCLI: added "get/set path.hash.mode " 2026-02-23 14:25:19 +11:00
Scott Powell 62320b64c5 * refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Scott Powell 19e9551738 * ver 1.13.0 2026-02-15 17:24:37 +11:00
Wessel Nieboer 20e71ebc53 Allow negative tx power
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
Scott Powell 16dfed0353 * ver 1.12.0 2026-01-29 21:12:31 +11:00
liamcottle c8992ae5b6 added build flag to enable/disable boot advert 2026-01-26 22:39:39 +13:00
liamcottle 6cb97cca77 boot adverts are now zero hop instead of flood 2026-01-26 22:20:36 +13:00
ripplebiz d32913a694 Merge pull request #1457 from oltaco/remote-set-prvkey
Allow set prv.key over LoRa, clear ACL and validate key
2026-01-25 14:46:41 +11:00
taco a6ecec57f1 allow set prv.key from remote, validate new prv.key 2026-01-25 01:32:48 +11:00
taco 447b4ca36c recalc ClientACL shared_secrets at startup 2026-01-25 01:32:44 +11:00
taco 1df8dc9ef3 refactor ClientACL and CommonCLI, add ClientACL::clear() 2026-01-25 01:31:53 +11:00
taco 3850bd9fbe build fix for room server with MESH_DEBUG=1 2026-01-23 23:43:05 +11:00
ViezeVingertjes 40a09e9450 Implement token bucket duty cycle enforcement 2026-01-04 21:33:46 +01:00
Scott Powell dbce6c55fa * ver 1.11.0 2025-11-30 18:32:10 +11:00
ripplebiz de4aeebb1e Merge pull request #1131 from wel97459/dev-uint
Changed uint used in flags to uint8_t
2025-11-25 21:51:36 +11:00
Scott Powell d8ffd816e7 * BUG FIX: remote login fix same as repeater 2025-11-25 15:12:48 +11:00
taco ed4178fa96 add board.setAdcMultiplier to room server and sensor 2025-11-21 21:46:55 +11:00
Winston Lowe 0c4e3b7e59 Changed uint to a uint8_t 2025-11-20 21:58:42 -08:00
Scott Powell f54d819269 * ver 1.10.0 2025-11-13 20:45:38 +11:00
ripplebiz 8e30aa6c7c Merge pull request #971 from fdlamotte/remove_set_setting_by_key
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
Florent eb7d93ff91 Merge branch 'dev' into remove_set_setting_by_key 2025-11-11 12:23:12 +01:00
Scott Powell cf3da818b8 * fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions. 2025-11-09 16:36:23 +11:00
Scott Powell 116a432946 * FIX: for divide by zero crash 2025-10-30 19:11:04 +11:00
Scott Powell 7ff483ab74 * Fix for VolatileRTCClock wrapping around to initial synced time every 49 days 2025-10-30 16:45:50 +11:00
Scott Powell 28ca26f691 * direct.txdelay default now 0.2 (was zero) 2025-10-30 00:03:10 +11:00
Scott Powell 48fe67067c * experimental: retransmit delay, removing the 6 'slots' 2025-10-29 23:35:46 +11:00
Michael Hart ed9f003c33 Adds serial commands to get stats
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
liamcottle ddb19486c5 increase room server max uptime from 49 days to 136 years 2025-10-23 23:29:08 +13:00
Florent 8d54a107ec SensorManager: remove setSettingByKey 2025-10-18 23:37:58 +02:00
Florent a578ffcfb7 CommonCli: Remove dependency on target.h 2025-10-18 12:33:43 +02:00
Scott Powell 22a04b34c3 * repeater and room server: enable downgrading permissions on guest login 2025-10-14 12:31:43 +11:00
Scott Powell 6e8eaedd8f * Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData() 2025-10-12 12:49:26 +11:00
Scott Powell 5b5aabcafd * Advert type fix
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
Florent 972b614f32 gps_cli: gps advert to control advert location policy 2025-10-11 19:00:02 +02:00
Florent de Lamotte fefe01bf24 gps_cli: gps also restored on sensors and rooms 2025-10-06 15:30:18 +02:00
Scott Powell 3a8ad25437 * ver 1.9.1 2025-10-02 12:52:19 +10:00
Scott Powell 2f8adc198c * ver 1.9.0 2025-09-28 19:24:00 +10:00
Scott Powell 96f7bb3d60 * repeater & room server fix for blank guest password 2025-09-27 01:56:27 +10:00
Scott Powell d3ccef3845 * companion: disabled processing/sending of keep_alive packets (deprecated)
* FIRMWARE_VER_LEVEL now moved to end of response payloads
2025-09-25 09:39:11 +10:00
Scott Powell 7f14915350 * Login response payload: now includes FIRMWARE_VER_LEVEL 2025-09-25 09:07:59 +10:00