Commit Graph
1163 Commits
Author SHA1 Message Date
Liam Cottle c5c78d37bd Merge pull request #3033 from liamcottle/board/lilygo-tbeam-sx1276
Increase LilyGo T-Beam SX1276 channels from 8 to 40
2026-07-24 15:34:19 +12:00
liamcottle 77244ce4a6 increase tbeam sx1276 max group channels from 8 to 40 2026-07-24 15:31:01 +12:00
Liam Cottle b057f40b53 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Liam Cottle 06d660bf86 Merge pull request #2815 from UltimateCodeWarrior/fix/tbeam-supreme-v3-oled-i2c
Fix blank OLED on T-Beam Supreme V3 (I2C bus init + 0x3D address)
2026-07-21 19:17:32 +12:00
=UltimateCodeWarrior 1dd58e3b49 Move Supreme OLED address to variant config
Keep SH1106Display generic by relying on DISPLAY_ADDRESS while the T-Beam Supreme variant declares its 0x3D OLED address.
2026-07-20 19:24:38 -07:00
fdlamotte 79e06eaf99 Merge pull request #2887 from spinda/thinknode-m3-dev
Fix GPS and LEDs on ThinkNode M3
2026-07-20 17:42:30 -04:00
entr0p1 5920b28f33 Fix Xiao nRF52840 repeater compile failure
Compile fails due to user_btn not declared in board target.

Fixes:
- Add MomentaryButton declaration for user_btn in variants/xiao_nrf52/target.cpp
- Add momentary button helper include in variants/xiao_nrf52/target.h
- Add extern linkage for MomentaryButton -> user_btn in variants/xiao_nrf52/target.h
2026-07-20 22:43:25 +10:00
taco 172b0d44b0 fix: heltec t1: add missing bodmer TFT_eSPI library 2026-07-20 20:28:38 +10:00
ViezeVingertjes 2679fa8ebc fix: prevent ESP32 KISS modem stalls under USB backpressure
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
ripplebiz c289e500d5 Merge pull request #2966 from Quency-D/heltec-rc32
Add Heltec rc32 board
2026-07-17 23:23:29 +10:00
Florent dccbdd4a02 nrf52_variants: override shutdownPeripherals instead of powerOff for TechoLite, TInpulse and TechoBoard (protect the gate) 2026-07-17 07:36:39 -04:00
fdlamotte 1ca67310df Merge pull request #2906 from fdlamotte/shutdown_peripherals
Proposal: Introduce shutdownPeripherals in NRF52Board to prepare for shutdown
2026-07-17 06:53:00 -04:00
Quency-D 28d3f22b07 Move the rotation input to target.cpp 2026-07-17 15:50:25 +08:00
ripplebiz 23c9e0cc8d Merge pull request #2560 from Quency-D/heltec-v4-r8
Add heltec-v4-r8 board
2026-07-17 13:54:45 +10:00
Quency-D b18356caca Optimize battery voltage reading 2026-07-16 17:45:00 +08:00
Quency-D bf56f54427 Delete duplicate pin definitions 2026-07-16 15:14:17 +08:00
Quency-D 7a1fdb0ea2 Enable patch reception 2026-07-16 11:37:12 +08:00
Quency-D 6a651edbfe Add a rotary encoder 2026-07-15 17:45:24 +08:00
ripplebiz f1b84898a6 Merge pull request #1983 from rgregg/rak-ethernet
Support for RAK ethernet module
2026-07-15 18:53:38 +10:00
Quency-D 87c0849a07 Merge pull request #17 from meshcore-dev/dev
merge Dev
2026-07-15 14:49:40 +08:00
liamcottle 94d17a9f10 increase thinknode m7 max neighbours to 50 2026-07-15 16:05:37 +12:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Huw Duddy c7573330ff Merge pull request #2951 from meshcore-dev/fast-st7735-display
Fast ST7735 Display Driver
2026-07-14 16:01:14 +10:00
ripplebiz dac6eed388 Merge pull request #2898 from entr0p1/fix/lilygo-techo-lite-sx1262-ldo
Lilygo T-Echo Lite - Change SX1262 from DC-DC to LDO regulator
2026-07-14 14:53:44 +10:00
ripplebiz 165906a341 Merge pull request #2899 from entr0p1/fix/lilygo-techo-lite-nrf-dcdc
Lilygo T-Echo Lite - nRF52840 DC-DC
2026-07-14 14:52:56 +10:00
ripplebiz cb2147690e Merge pull request #2905 from entr0p1/fix/heltec-t114-nrf-dcdc
Heltec T114 - nRF52840 DC-DC Regulator
2026-07-14 14:52:10 +10:00
Scott Powell e46734aa6f * trying to get Heltec Tracker and Tracker V2 working 2026-07-13 23:27:50 +10:00
liamcottle 4d3131deed initial support for thinknode m9 2026-07-13 19:07:09 +12:00
Liam Cottle e59f529ee9 Merge pull request #2839 from liamcottle/board/thinknode-m7
Add support for Elecrow ThinkNode M7
2026-07-13 15:06:17 +12:00
Liam Cottle 4322c3800a Merge pull request #2936 from beala/beala/MeshTowerV2_feed_watchdog_2
Feed external hardware watchdog on Heltec Tower V2 (aka MeshTower V2) Implementation 2
2026-07-13 14:49:04 +12:00
Liam Cottle 4db4fcf3f3 Merge pull request #2935 from benskigomez/fix/m6-repeater-debug-flags
ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
2026-07-13 12:55:13 +12:00
Jody Bentley 12c1b54859 ThinkNode M6/M1 room_server: set ROOM_PASSWORD default
Without ROOM_PASSWORD the guest password defaults to empty, and a client
sending a blank password is granted read+write access (can post). Every
other board's room_server env sets ROOM_PASSWORD; the ThinkNode M6 and M1
were the only two shipping an open room. Default them to "hello" to match
the rest of the tree; operators can still change it at runtime with
'set guest.password'.
2026-07-12 18:32:09 -04:00
Alex Beal dc17bf149c Add an instance of ExternalWatchdogManager to Tower V2 2026-07-12 16:17:23 -06:00
Jody Bentley 484f253abb ThinkNode M6 repeater: disable leftover MESH_DEBUG/GPS_NMEA_DEBUG
The M6 is the only board whose simple_repeater env ships with MESH_DEBUG=1
and GPS_NMEA_DEBUG=1 enabled. MESH_DEBUG=1 adds a 5-second boot delay
(examples/simple_repeater/main.cpp) plus verbose per-packet serial prints on
the hot RX/TX path; GPS_NMEA_DEBUG=1 echoes every GPS UART character to the
serial console (MicroNMEALocationProvider.h). Every sibling repeater env
(M1, M3, t1000-e, RAK, Heltec) ships these off, and the M6 room_server env
in this same file already has them commented. Comment them out to match.
2026-07-12 17:54:14 -04:00
Alex Beal 653bb4f892 Update #defines
External watchdog support was added (but never merged) for MeshTower V1. The update's V2's #defines to follow the conventions set there and piggy back off the support already written for V1.
2026-07-12 15:50:43 -06:00
Alex Beal 54ccedefdb Merge branch 'dev' into pr-1446 2026-07-12 15:44:28 -06:00
Wessel Nieboer 7966551627 fix misspelled RF switch pin macros in SX1268/LLCC68/SX1276 radio wrappers 2026-07-09 16:31:28 +02:00
Quency-D 0c0965ea3a Add heltec rc32 board 2026-07-08 16:20:12 +08:00
Florent d19bc6fa77 introduce shutdownPeripherals in NRF52Board to prepare for shutdown 2026-07-07 10:20:03 -04:00
entr0p1 d87bf40fde Heltec T114 - nRF52840 DC-DC Regulator
- Enable DC-DC regulator on nRF52840 for Heltec T114 board (idle current reduced from ~12mA to ~9mA)
2026-07-07 17:12:59 +10:00
Florent 3ea483560b fix tenstar c3 repeater build 2026-07-06 12:04:42 -04:00
entr0p1 f3f2db834c Lilygo T-Echo Lite
- Enable nRF52840 DC-DC - board idle usage reduced from ~12mA to ~7mA
2026-07-06 15:21:09 +10:00
Scott Powell 57e5a1229c * super fast ST7735 display driver 2026-07-06 15:09:18 +10:00
entr0p1 ce9ca615ee Lilygo T-Echo Lite
- Change SX1262 to use LDO instead of DC-DC (DCC pin on SX1262 not wired in, according to schematic)
2026-07-06 14:52:18 +10:00
Kevin Le 446e6b7d41 Fixed hibernate/powerOff for ESP32 boards to stay at uA 2026-07-05 23:47:27 +07:00
Kevin Le 18c1347b78 Cleanup Poweroff for NRF52 boards 2026-07-05 22:10:47 +07:00
Quency-D 1a1239844c Merge branch 'dev' into solar-watchdog 2026-07-04 16:47:37 +08:00
Naomi Smith 2221f20525 Fix GPS and LEDs on ThinkNode M3
GPS support was implemented incorrectly for the ThinkNode M3. The reset
pin was being driven when it should be left floating for this unit. The
enable pin also wasn't being picked up by `MicroNMEALocationProvider`
because of a mismatch in constant naming conventions. I did a general
cleanup of the GPS and ThinkNode M3 bring-up code so that constant names
line up and "*_ACTIVE" constants are used consistently vs hardcoding
`HIGH`/`LOW`. After making these changes, serial data immediately starts
streaming in from the NMEA on boot and GPS detection just works.

LED handling was also not quite right for the ThinkNode M3. The LoRa TX
LED was being driven high to turn it on when it should actually be
driven low. I changed the code to use the `LED_STATE_ON` constant and
also added a little code to the shutdown path to properly make sure that
all LEDs are turned off.

Tested and confirmed working on real hardware.

Resolves both #1864 and #2879.
2026-07-03 12:07:19 -07:00
Liam Cottle a2ae24e51f Merge pull request #2570 from IoTThinks/MCdev-Fixed-flashmode-XiaoC6-202605
Added flash_mode=dio to avoid boot loop when flashing using merge.bin
2026-06-27 11:32:10 +12:00
Quency-D 0d034d4738 Merge pull request #14 from meshcore-dev/dev
merge Dev
2026-06-26 17:16:23 +08:00