Kevin Le
18c1347b78
Cleanup Poweroff for NRF52 boards
2026-07-05 22:10:47 +07:00
fdlamotte
3eebda66d0
Merge pull request #2235 from jirogit/fix/lr1110-rxgain-cli-guard
...
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
2026-05-24 11:56:23 +02:00
jirogit
9de04fe0da
fix: enable radio.rxgain CLI command for LR1110 (T1000-E)
...
USE_LR1110 was missing from the preprocessor guard in CommonCLI.cpp,
causing both get and set to fail silently on T1000-E:
- get radio.rxgain returned the full radio config string (fell through
to the memcmp("radio", 5) branch)
- set radio.rxgain returned "unknown config" (no branch matched)
Fix: add -D USE_LR1110 to variants/t1000-e/platformio.ini and include
USE_LR1110 in the #if guard on both get and set branches.
CustomLR1110Wrapper already implements setRxBoostedGainMode() and
getRxBoostedGainMode() via the RadioLibWrapper virtual interface,
so no radio-layer changes are required.
Tested on T1000-E: get/set/persist all confirmed working.
2026-05-01 00:31:31 -07:00
Scott Powell
8903b907d1
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
Liam Cottle
59a6ee658e
Merge pull request #2432 from recrof/kiss-radio-everywhere
...
kiss radio: added stm32 support + envs in platformio.ini
2026-05-01 00:36:46 +12:00
Rastislav Vysoky
0a2f6b1cd9
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
OverkillFPV
db254a0051
Merge branch 'dev' into lora-longer-preamble
2026-04-16 20:43:46 +10:00
Liam Cottle
24fb1ad847
Merge pull request #2072 from robekl/fix-t1000e-pin-comments
...
Fix T1000-E pin comments
2026-04-13 02:27:19 +12:00
Wessel Nieboer
39b0f400bc
Fix T1000E press=high
2026-04-04 13:19:13 +02:00
Wessel Nieboer
f7fec7cfd9
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
overkillfpv
78cc18f919
changed to set the preamble on radio settings change
2026-03-29 21:45:16 +11:00
Robert Ekl
65b03c2c0a
Fix T1000-E pin comments
2026-03-17 09:00:06 -05:00
Liam Cottle
541dad8202
Merge pull request #1391 from R6DJO/fix_t1000-e_temp
...
T1000-E: Negative temperature values incorrectly displayed due to char signedness
2026-03-07 16:49:54 +13:00
Wessel Nieboer
20e71ebc53
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
fdlamotte
b3d4dfa05b
Merge branch 'dev' into nrf-dcdc
2026-01-27 08:42:58 -04:00
Scott Powell
bce64a57f9
* T1000e BLE - default node name is now the MAC address
2026-01-23 15:53:58 +11:00
Alexander aka R6DJO and Claude Sonnet 4.5
6004969528
Fix T1000-E negative temperature display bug
...
The ntc_temp2 lookup table was declared as 'char', which can be
unsigned on some platforms, causing negative temperature values
(-30°C to -1°C) to be incorrectly interpreted.
Changed to int8_t to ensure proper signed integer handling of
negative temperatures.
Fixes #1389
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com >
2026-01-14 09:30:20 +03:00
Frieder Schrempf
f401f68309
Remove NRF52BoardOTA class and integrate it into NRF52Board
...
As all NRF52 boards now have OTA support, let's remove the subclass
and integrate it into the base class.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:46:20 +01:00
Frieder Schrempf
fd73e6200f
variants: T1000E: Add OTA support
...
To reduce the number of different code paths, add OTA support for the
remaining NRF52 boards.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2026-01-08 22:46:09 +01:00
Ferdia McKeogh
6301cddee2
Fix capitalization in T1000-E manufacturer string
2026-01-07 14:24:25 +01:00
entr0p1
dc0e4c6707
Fixed T1000-E temperature and lux sensors
2025-12-19 23:51:36 +11:00
Frieder Schrempf
6a06a12476
Deduplicate NRF52 startOTAUpdate()
...
The startOTAUpdate() is the same for all NRF52 boards. Use a common
implementation for all boards that currently have a specific
implementation.
The following boards currently have an empty startOTAUpdate() for
whatever reasons and therefore are not inheriting NRF52BoardOTA to
keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E,
Wio WM1110.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:30:50 +01:00
Frieder Schrempf
e75ae46f4e
Deduplicate DC/DC regulator enable for NRF52 boards
...
Some NRF52 boards are able to use the internal power-efficient DC/DC
regulator. Add a new class that can be inherited by board classes to
enable this feature and reduce the power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:29:14 +01:00
Frieder Schrempf
b9958e1c99
Use common NRF52 begin() and deduplicate() startup reason init
...
Use a common begin() method that can be called from derived classes
to contain the shared initialization code.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:26:57 +01:00
Frieder Schrempf
2f79f3b03d
Deduplicate reboot() for NRF52 boards
...
The reboot() method is the same for all NRF52 boards. Use a shared
implementation.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-12-17 10:25:16 +01:00
Kevin Le
2c47d417d9
Added default temperature from ESP32 MCU and NRF52 MCU
...
Added NRF52Board.h and NRF52Board.cpp
Modified NRF52 variants to extend from NRF52Board to share common feature
2025-12-12 19:01:15 +07:00
taco
7a6169160e
fix DC/DC enable for boards which currently have it.
...
this fixes how the reg1 dc/dc converter is enabled on WisMesh Tag / T1000e / WM1110 and Xiao NRF52
2025-12-03 15:59:59 +11:00
Florent
a578ffcfb7
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
ripplebiz
9e0cd038c4
Merge pull request #821 from fdlamotte/ui_gps_page
...
ui_task: initial gps page
2025-10-02 18:54:23 +10:00
liamcottle
c5932a6878
increase MAX_NEIGHBOURS from 8 to 50
2025-09-28 16:11:58 +13:00
Florent
250114d34b
ui_task: initial gps page
2025-09-23 12:08:34 +02:00
taco
cc881e3dcd
fix inconsistencies across nrf companion roles
2025-09-09 17:00:29 +10:00
taco
9e26b0eb3d
new ldscript for extrafs nrf companion envs
2025-09-09 16:55:46 +10:00
Florent
26aad5120b
t1000e: revert GPS_RESETB as an INPUT
2025-09-07 19:48:02 +02:00
fdlamotte
3cec0e7658
Merge pull request #736 from ViezeVingertjes/t1000e-low-power
...
Introduce BLE low-power mode and enable DC/DC converter
2025-09-07 16:01:22 +02:00
ViezeVingertjes
09152dc0d4
Replaced BLE_LOW_POWER with BLE_TX_POWER & updated usages.
2025-09-07 15:44:24 +02:00
ViezeVingertjes
44dd96dc0c
T1000-E: refactor GPS initialization; set GPS_RESETB pin as OUTPUT and remove redundant pin settings
2025-09-06 20:42:11 +02:00
ViezeVingertjes
6ac03584cc
T1000-E: ensure rails off and radio idle before system off; fix button wake pin
2025-09-06 20:10:09 +02:00
taco
7a6ed7fe98
nrf52 targets: increase limits for contacts and channels
2025-09-06 14:15:40 +10:00
ViezeVingertjes
7de301374c
Updated BLE functionality for low power mode in SerialBLEInterface. Updated platformio.ini to enable low power mode and added DC/DC converter support in T1000eBoard for improved power efficiency.
2025-09-05 10:46:51 +02:00
recrof
5e607215d6
moved pindefs from board to platformio.ini
2025-09-04 23:31:05 +02:00
recrof
ab58f15bd5
t1000 cleanup + move NullDisplayDriver.h to helpers/ui for other variants to use
2025-09-04 23:12:57 +02:00
446564
bf73402cbc
remove display class from repeater and room
2025-08-28 08:13:33 -07:00
446564
a69cbe4115
add remaining roles to t1000e
...
usb companion, repeater and room server
2025-08-27 10:30:56 -07:00
Florent
02c0cd7558
t1000: wait for button release before powering off
2025-08-17 16:28:02 +02:00
Scott Powell
a4db089cd8
* original UITask now in /ui-orig folder
2025-08-16 21:09:35 +10:00
recrof
398736dccf
move radiolib wrappers to dedicated directory
2025-07-13 11:37:33 +02:00
liquidraver
ee7aa4341c
LR's corrected calculation override (instead of SX) and minor changes according to radiolib's wiki
2025-07-04 16:40:19 +02:00
Florent de Lamotte
fe65995b42
t1000e: set preamble to 16 at init
2025-07-01 15:42:54 +02:00
Scott Powell
8c00fa1f08
* refactored SensorManager::toggleGps()
2025-06-20 13:44:58 +10:00