Commit Graph
233 Commits
Author SHA1 Message Date
tth 2c2c52183b Merge remote-tracking branch 'origin/main' 2026-08-28 17:57:18 +02:00
Rastislav Vysoky 41d63f83eb FAQ: Fixed instructions on wiping and resetting nrf52 devices 2026-08-23 20:13:12 +02:00
tthandClaude Opus 5 cb74cdee06 Merge upstream v1.17.1 (origin/main)
Small one after v1.17.0: 57 files, +825/-200, and it merged with no conflicts at
all. Unlike 1.17.0, the release tags sit directly on origin/main, so no
`-s ours` is needed for git describe to see the release.

What matters for our nodes:

* fix-rxgain-setting-post-agc-reset -- rx gain no longer resets after an AGC
  adjustment. The release notes ask repeater admins to verify radio.rxgain (and
  the new radio.fem.rxgain) after updating, so that goes on the post-flash list.
* NRF52 CC310 crypto is initialised once instead of on every call, and several
  NRF52 pin maps were corrected.
* New 'get/set radio.fem.rxgain/txgain' CLI commands (companion cannot configure
  them yet).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-15 14:13:50 +02:00
ripplebiz d5949f93d8 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
tthandClaude Opus 5 10a0c7cefc Merge upstream v1.17.0 (origin/main) into the analyzer/BLE fork
Upstream shipped companion/repeater/room-server v1.17.0 today; its tree is
identical to origin/main, so that is what this merges. Our base was 7 Jul
(7b566670), i.e. 350 files / +11k lines of upstream behind.

Conflicts and how they were settled:

* Mesh.cpp -- upstream split the dedup into wasSeen() + explicit markSeen().
  Kept BOTH: their new call pair AND our payload-length bound on the TRACE
  path-hash read, which is what stops a crafted short TRACE from steering
  isHashMatch() past the buffer.
* companion_radio/main.cpp -- upstream grew its own MultiSerialInterface
  (BLE + USB + WiFi + Ethernet registered side by side), which is a superset
  of the SerialDualInterface we backported from PR #1779. Took theirs whole;
  our copy is now dead code. NOTE: envs that relied on the backport for a USB
  console alongside BLE now need an explicit -D ENABLE_USB_INTERFACE.
* ui-new/UITask.cpp -- isSerialEnabled() was renamed isBluetoothEnabled()
  upstream and DisplayDriver::RED became UIColor::warning_txt. Same intent
  either way: no BT pin on screen while Bluetooth is off.
* EnvironmentSensorManager.cpp -- upstream fixed the millis() wrap on the GPS
  update timer in the exact line our gpsDutyLoop() call sits on. Kept both,
  with their wrap-safe compare.
* NRF52Board.cpp -- upstream independently arrived at the same sd_temp_get()
  fix for SoftDevice-protected TEMP. Took their form, kept our comment, which
  is the only place recording WHY (APP_MEMACC fault -> reboot on telemetry).
* RadioLibWrappers.{h,cpp}, simple_repeater/main.cpp -- add/add. Their
  configSideDetectors()/performChannelScan()/external watchdog next to our
  irqDoneMask()/probeDio1()/BLE pump/WDT feed. The repeater console keeps the
  1032-byte reply buffer for paged analyzer output and now clears it, since a
  static buffer would otherwise reprint the previous reply.
* .vscode/extensions.json -- deleted upstream, and it is in .gitignore; our
  only change was a comment. Gone.

Built clean: Xiao_x1_rpt, Xiao_x2_cmp, Xiao_x3_obs, SenseCap_s1_rpt,
T1000E_cmp_cz. Not flashed to anything yet.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-09 22:44:07 +02:00
tthandClaude Opus 5 bbd4fbc358 feat(clock): a node with no GPS starts at its build epoch, not in 2024
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-09 22:24:59 +02:00
Scott Powell 49319023e5 Merge branch 'dev'
# Conflicts:
#	docs/payloads.md
2026-08-09 14:36:53 -04:00
Scott Powell da1fc9c0e8 Merge branch 'dev'
# Conflicts:
#	docs/payloads.md
2026-08-09 15:16:48 +10:00
Adam Gessaman 5704db9f74 fix(station-g3): apply FEM PA level at TX start
PA PL1 re-targets the PA's DC-DC supply rail rather than selecting a
logic-level gain, and the serial CLI is serviced on every main-loop pass
regardless of whether a transmit is in flight. A `set radio.fem.txgain`
write could therefore move the rail mid-transmit, while the SX1262 was
still driving the PA at full input power.

Record the requested level in setPAGainEnable() and drive the pin from
setTxModeEnable(), which runs from onBeforeTransmit() ahead of
startTransmit(). The level only matters while transmitting, so deferring
costs nothing.

Document that the pref is saved immediately but applied at the next
transmit, so `get radio.fem.txgain` can lead the hardware until then.
2026-08-08 14:53:57 -07:00
agessaman 2eb7feffe0 fix(station-g3): expose FEM gain preferences 2026-08-06 15:29:14 -07:00
tthandClaude Opus 5 5486cc5439 feat(gps): duty-cycle the receiver, for nodes that run GPS only for the clock
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-06 10:05:26 +02:00
ripplebiz 837869fa93 Merge pull request #3004 from axhoff/agent/preserve-utf8-advert-names
Preserve UTF-8 boundaries in advert names
2026-07-30 12:59:59 +10:00
DG1TAL ae3517f480 Clarify hashtag privacy and group sender identity 2026-07-27 20:07:08 +02:00
Talia 9d2343e06f docs: increase header levels on payloads page to fix table of contents
mkdocs will only consider the first H1 (if any) and subheaders under it for the table of contents

this increases the header levels of everything below "important concepts" by 1 so that the table of contents correctly resolves them
2026-07-26 15:55:27 -07:00
Liam Cottle b057f40b53 Merge pull request #2819 from ViezeVingertjes/fix/kiss-modem-usb-backpressure
fix: prevent ESP32 KISS modem stalls under USB backpressure
2026-07-24 11:51:34 +12:00
Alexander Hoffer c5f09f2490 fix: preserve UTF-8 advert names 2026-07-20 15:47:03 +01:00
liamcottle 22b2de711c Merge remote-tracking branch 'official/main' into dev 2026-07-20 20:42:09 +12:00
ViezeVingertjes 2679fa8ebc fix: prevent ESP32 KISS modem stalls under USB backpressure
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
Ryan Gregg 3ba5de20f6 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	examples/companion_radio/main.cpp
2026-07-13 23:06:00 -07:00
Will Dillon 4397242114 Add StreamSensor allocation for GroupData
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product. It was previously a LoRaWAN platform, and we've moved to Meshcore.

Let me know when and how to demonstrate.
2026-07-13 05:54:31 -07:00
ripplebiz 95f3869475 Revert "Add StreamSensor allocation for GroupData" 2026-07-13 19:30:11 +10:00
Will Dillon b457f22a0a Update number_allocations.md
Adds a small allocation for groupdata packets for the Meshcore firmware for the StreamSensor product.  It was previously a LoRaWAN platform, and we've moved to Meshcore.
2026-07-09 11:43:20 -07:00
liamcottle 15e509f074 update qr code docs 2026-07-06 02:04:56 +12:00
HDDen de1ec0dbd3 Update number_allocations.md 2026-06-29 12:41:44 +03:00
HDDen 3f419b9184 Update number_allocations.md
Added Data-Type range for MeshCore Images codec (range is for small reserve to future versions)
2026-06-28 00:32:22 +03:00
Ryan Gregg 7f1ecc2045 Merge remote-tracking branch 'upstream/dev' into rak-ethernet
# Conflicts:
#	docs/faq.md
#	examples/companion_radio/main.cpp
2026-06-20 14:39:03 -07:00
Wessel Nieboer e77b6b101f Have CAD be a separate toggle (set cad on/off) 2026-06-14 15:20:58 +02:00
formtapez 5ae8c26772 fix formatting 2026-06-12 12:14:46 +02:00
formtapez b21b12ec7f added some missing CLI commands 2026-06-12 12:11:12 +02:00
Quency-D 606f8f1cc3 Merge branch 'dev' into cli-lna-command 2026-06-10 11:30:04 +08:00
Scott Powell f7f8a331cd Merge branch 'dev'
# Conflicts:
#	docs/faq.md
2026-06-06 21:12:43 +10:00
IoTThinks f74c1ab368 Change default power saving setting to 'off' 2026-06-06 11:04:36 +07:00
Scott Powell 6a1a4601ba * number allocations: Ripple range reserved 2026-06-06 12:45:35 +10:00
Sefinek 03a3cf4584 docs: fix remaining rendering issues 2026-06-03 00:38:53 +02:00
Sefinek 0b0db507e3 docs: fix remaining rendering issues 2026-06-03 00:32:25 +02:00
Sefinek 0a60cb7501 docs: fix remaining rendering issues 2026-06-03 00:28:09 +02:00
Sefinek df7aed8310 docs: fix remaining rendering issues 2026-06-03 00:24:01 +02:00
Sefinek 1ba4a45043 docs: add missing periods at sentence endings 2026-06-03 00:15:26 +02:00
Sefinek 245f60b00d docs: fix FAQ rendering 2026-06-03 00:14:29 +02:00
Sefinek 1b51cb9574 docs: fix FAQ heading capitalization 2026-06-02 23:57:50 +02:00
Sefinek de0cce9c75 docs: fix FAQ link rendering 2026-06-02 23:48:28 +02:00
Sefinek 215010901c docs: fix FAQ rendering 2026-06-02 23:35:02 +02:00
Sefinek 6ce32a42e4 docs: fix FAQ resource link rendering 2026-06-02 23:31:25 +02:00
Sefinek d1a641a317 docs: fix FAQ bullet list rendering 2026-06-02 22:34:38 +02:00
Sefinek 412dbdf8e4 docs: fix FAQ bullet list rendering 2026-06-02 22:30:42 +02:00
Sefinek 87c33fccb3 docs: remove extra FAQ TOC indentation 2026-06-02 22:28:15 +02:00
Sefinek 4ace26210c docs: fix typos, grammar, and formatting in FAQ and code comments 2026-06-02 22:12:18 +02:00
ripplebiz fb517b2164 Merge pull request #2661 from mrzarquon/mrz/flood_max_unscoped
Implement flood.max.unscoped to allow selective repeating of unscoped messages
2026-06-02 14:00:33 +10:00
Liam Cottle c63390650d Merge pull request #2636 from sefinek/fix/cmd-device-query-typo
fix: rename CMD_DEVICE_QEURY to CMD_DEVICE_QUERY
2026-06-02 12:41:57 +12:00
Liam Cottle 7feea5981a Merge pull request #2635 from sefinek/docs/fix-typos-and-grammar
docs: fix typos, grammar issues and standardise Wi-Fi spelling
2026-06-02 12:41:30 +12:00