Files
meshcore-tth/examples/simple_repeater/MyMesh.h
T
2026-11-14 11:02:58 +01:00

535 lines
23 KiB
C++

#pragma once
#include <Arduino.h>
#include <Mesh.h>
#include <RTClib.h>
#include <target.h>
#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
#include <InternalFileSystem.h>
#elif defined(RP2040_PLATFORM)
#include <LittleFS.h>
#elif defined(ESP32)
#include <SPIFFS.h>
using File = fs::File;
#endif
#ifdef WITH_RS232_BRIDGE
#include "helpers/bridges/RS232Bridge.h"
#define WITH_BRIDGE
#endif
#ifdef WITH_ESPNOW_BRIDGE
#include "helpers/bridges/ESPNowBridge.h"
#define WITH_BRIDGE
#endif
#include <helpers/AdvertDataHelpers.h>
#include <helpers/ArduinoHelpers.h>
#include <helpers/ClientACL.h>
#include <helpers/CommonCLI.h>
#include <helpers/IdentityStore.h>
#include <helpers/SimpleMeshTables.h>
#include <helpers/StaticPoolPacketManager.h>
#include <helpers/StatsFormatHelper.h>
#include <helpers/TxtDataHelpers.h>
#include <helpers/FairnessLimiter.h>
#include <helpers/ChannelGate.h>
#include <helpers/RegionMap.h>
#include <helpers/RoutingPolicy.h>
#include "RateLimiter.h"
#ifdef WITH_BRIDGE
extern AbstractBridge* bridge;
#endif
struct RepeaterStats {
uint16_t batt_milli_volts;
uint16_t curr_tx_queue_len;
int16_t noise_floor;
int16_t last_rssi;
uint32_t n_packets_recv;
uint32_t n_packets_sent;
uint32_t total_air_time_secs;
uint32_t total_up_time_secs;
uint32_t n_sent_flood, n_sent_direct;
uint32_t n_recv_flood, n_recv_direct;
uint16_t err_events; // was 'n_full_events'
int16_t last_snr; // x 4
uint16_t n_direct_dups, n_flood_dups;
uint32_t total_rx_air_time_secs;
uint32_t n_recv_errors;
// CUSTOM (TeTeHacko): appended at the END on purpose. Clients parse this
// struct by fixed offsets, so fields added here are simply invisible to older
// ones instead of shifting everything after them -- the same way upstream
// grew its companion stats frame (docs/stats_binary_frames.md documents a
// 26-byte "legacy" and a 30-byte frame that appends recv_errors).
//
// These two come from the Dispatcher requeue counters. Without them a
// repeater that keeps failing to get its transmits out looks perfectly
// healthy in every other field: sent/airtime just stop growing, and there is
// nothing in the status that says why.
uint32_t n_tx_start_fail, n_tx_timeout;
};
// This struct goes on the air byte-for-byte, so its size is part of the
// protocol: 56 bytes up to n_recv_errors (what upstream clients expect and
// gate on -- meshcore-py's parse_status() reads recv_errors only
// `if len(data) >= offset + 56`), plus the 8 appended here. Reordering a field
// or letting the compiler insert padding would silently shift every offset
// after it, so pin the number instead of trusting review.
static_assert(sizeof(RepeaterStats) == 64,
"RepeaterStats is a wire format: append only, keep it padding-free");
// MAX_CLIENTS zrusen tady mergem origin/dev (e0031870, "centralise max clients"):
// od te doby ho definuje src/helpers/ClientACL.h, ktery se sem stejne dostane.
struct NeighbourInfo {
mesh::Identity id;
uint32_t advert_timestamp;
uint32_t heard_timestamp;
int8_t snr; // multiplied by 4, user should divide to get float value
};
// ---------------------------------------------------------------------------
// CUSTOM (TeTeHacko): passive "mesh analyzer" data. Two independent, RAM-only
// tables (both compiled out unless the build sets a non-zero size), fed from
// the normal RX path and pulled out over the text console (serial / BLE) for a
// map/bridge to consume:
// * heard_nodes[] -- one row per DISTINCT REPEATER / ROOM SERVER whose
// (verified) advert we heard (chat clients are intentionally skipped for
// privacy): pubkey prefix, name, type, position, last SNR/RSSI and the path
// the advert arrived by. -> map dots + topology edges + link quality.
// Exposed by the `nodes [offset]` CLI command.
// * rxlog_ring[] -- a circular firehose of EVERY parsed frame we hear:
// capture seq, time, packet hash, header (route|type), SNR/RSSI and the hop
// path. -> live traffic / analyzer view.
// Exposed by the `rxlog [cursor]` CLI command.
// * pktfeed_ring[] -- like rxlog but with the FULL RAW FRAME BYTES, for the
// community observer feed (meshcoretomqtt-compatible: the bridge derives
// type/route/payload and the SHA256 packet hash from the raw bytes).
// Smaller ring -- raw frames are fat (~268 B/record).
// Exposed by the `pktlog [cursor]` CLI command.
// Enable per-variant, e.g.: -D MAX_HEARD_NODES=48 -D RXLOG_SIZE=96 -D PKTFEED_SIZE=32
// ---------------------------------------------------------------------------
#ifndef MAX_HEARD_NODES
#define MAX_HEARD_NODES 0
#endif
#ifndef RXLOG_SIZE
#define RXLOG_SIZE 0
#endif
#ifndef PKTFEED_SIZE
#define PKTFEED_SIZE 0
#endif
#ifndef HEARD_NODE_NAME_LEN
#define HEARD_NODE_NAME_LEN 24
#endif
#ifndef HEARD_NODE_PREFIX
#define HEARD_NODE_PREFIX 6 // bytes of pub_key kept (resolve path hashes + registry cross-ref)
#endif
#ifndef ANALYZER_PATH_LEN
#define ANALYZER_PATH_LEN 16 // max hop-hash bytes kept per record
#endif
#ifndef HEARD_DIRECT_TTL_SECS
#define HEARD_DIRECT_TTL_SECS 3600 // keep showing a node as direct (0-hop) this long after last hearing it direct
#endif
#if MAX_HEARD_NODES
struct HeardNode {
uint8_t pub_prefix[HEARD_NODE_PREFIX];
char name[HEARD_NODE_NAME_LEN];
int32_t lat, lon; // degrees x 1e6, 0 = unknown
uint32_t heard_timestamp; // epoch when last heard (0 = empty slot)
uint32_t advert_timestamp; // advert's own timestamp (newest wins)
uint32_t pkt_hash; // FNV of the latest advert (type||payload) -- JOIN KEY:
// group rxlog records by this to get every path the
// advert arrived by (rxlog logs all copies pre-dedup)
uint32_t direct_heard; // epoch we last heard this node 0-hop (0 = never)
int8_t snr; // x4
int8_t rssi; // dBm
uint8_t type; // ADV_TYPE_*
uint8_t path_len; // bit-packed (hash size|count); representative/best path
uint8_t path[ANALYZER_PATH_LEN];
};
#endif
#if RXLOG_SIZE
struct RxLogRec {
uint32_t seq; // monotonic capture sequence (0 = empty slot; also the paging cursor)
uint32_t when; // epoch
uint32_t pkt_hash; // FNV-1a of (type||payload) -- cheap dedup / cross-observer id (NOT the SHA packet-hash)
int8_t snr; // x4
int8_t rssi; // dBm
uint8_t header; // raw header byte (route|type|ver)
uint8_t path_len; // bit-packed (hash size|count)
uint8_t path[ANALYZER_PATH_LEN];
};
#endif
#if PKTFEED_SIZE
struct PktFeedRec {
uint32_t seq; // monotonic capture sequence (0 = empty slot; also the paging cursor)
uint32_t when; // epoch
int8_t snr; // x4
int8_t rssi; // dBm
uint8_t len; // raw frame length in bytes
uint8_t raw[MAX_TRANS_UNIT]; // full wire frame (header|[transport]|path_len|path|payload)
};
#endif
#ifndef FIRMWARE_BUILD_DATE
#define FIRMWARE_BUILD_DATE "15 Oct 2026"
#endif
#ifndef FIRMWARE_VERSION
#define FIRMWARE_VERSION "v1.18.0"
#endif
#define FIRMWARE_ROLE "repeater"
#define PACKET_LOG_FILE "/packet_log"
class MyMesh : public mesh::Mesh, public CommonCLICallbacks {
FILESYSTEM* _fs;
uint32_t last_millis;
uint64_t uptime_millis;
unsigned long next_local_advert, next_flood_advert;
bool _logging;
NodePrefs _prefs;
ClientACL acl;
CommonCLI _cli;
uint8_t reply_data[MAX_PACKET_PAYLOAD];
uint8_t reply_path[MAX_PATH_SIZE];
uint8_t reply_path_len;
TransportKeyStore key_store;
RegionMap region_map, temp_map;
RegionEntry* load_stack[8];
RegionEntry* recv_pkt_region;
TransportKey default_scope;
RateLimiter discover_limiter, anon_limiter;
// CUSTOM (TeTeHacko): token-bucket limiter over FORWARDED traffic (port of
// upstream proposal #1502). Kill switch: _prefs.fairness_enabled.
FairnessLimiter fairness_limiter;
uint32_t filter_hash_dropped; // forwards vetoed by the channel-hash deny list
uint32_t filter_hash_passed; // throttled entries: forwards let through within budget
HashThrottle hash_throttle; // per-entry windows of `filter hash add <hex> <secs>`
unsigned long next_fair_sender_normal_refill, next_fair_sender_low_refill, next_fair_group_refill;
uint32_t pending_discover_tag;
unsigned long pending_discover_until;
bool region_load_active;
unsigned long dirty_contacts_expiry;
#if MAX_NEIGHBOURS
NeighbourInfo neighbours[MAX_NEIGHBOURS];
#endif
#if MAX_HEARD_NODES
HeardNode heard_nodes[MAX_HEARD_NODES];
#endif
#if RXLOG_SIZE
RxLogRec rxlog_ring[RXLOG_SIZE];
uint16_t rxlog_head; // next slot to write
uint32_t rxlog_next_seq; // next capture sequence to assign (starts at 1)
#endif
#if PKTFEED_SIZE
PktFeedRec pktfeed_ring[PKTFEED_SIZE];
uint16_t pktfeed_head; // next slot to write
uint32_t pktfeed_next_seq; // next capture sequence to assign (starts at 1)
// raw bytes staged in logRxRaw (pre-parse, the only place they exist) and
// committed to the ring in logRx (fires only for frames that parsed OK, so
// radio garbage never enters the feed)
uint8_t pktfeed_stage[MAX_TRANS_UNIT];
uint8_t pktfeed_stage_len; // 0 = nothing staged
#endif
#if defined(BOT_CHANNEL_PSK) || defined(FILTER_CHANNEL_PSKS)
// CUSTOM (TeTeHacko): registry of channels this node can DECRYPT (the bot
// channel and/or the filter channels). Shared by ChannelBot.h and
// ChannelFilter.h; fed to searchChannelsByHash(), whose API caps matches at 4.
#define MAX_KNOWN_CHANNELS 4
#define CHAN_FLAG_BOT 0x01 // ChannelBot answers on this channel
#define CHAN_FLAG_FILTER 0x02 // deny list applies to this channel
mesh::GroupChannel known_channels[MAX_KNOWN_CHANNELS];
uint8_t known_channel_flags[MAX_KNOWN_CHANNELS];
uint8_t num_known_channels;
#endif
#ifdef FILTER_CHANNEL_PSKS
uint32_t filter_dropped; // forwards vetoed by the deny list
uint32_t filter_age_dropped; // forwards vetoed by `filter age`
#endif
#ifdef BOT_CHANNEL_PSK
// Default zde, ne az v ChannelBot.h -- ten se includuje na konci MyMesh.cpp,
// tedy dlouho po teto deklaraci pole.
#ifndef BOT_PEER_SLOTS
#define BOT_PEER_SLOTS 8
#endif
#ifndef BOT_BURST_MAX
#define BOT_BURST_MAX 10
#endif
int8_t bot_channel_idx; // index into known_channels, -1 = PSK malformed, bot silently off
unsigned long bot_next_reply_at; // cooldown gate, 0 = not armed
uint32_t bot_replies_sent;
uint32_t bot_ignored; // zprav zahozenych podle BOT_IGNORE_SENDERS
uint32_t bot_throttled; // odpovedi potlacenych cooldownem
struct BotPeer { uint32_t name_hash; unsigned long next_at; };
BotPeer bot_peers[BOT_PEER_SLOTS]; // per-odesilatel okno, LRU
uint32_t bot_last_reply_secs; // RTC time of the last reply, 0 = never
unsigned long bot_burst_until[BOT_BURST_MAX > 0 ? BOT_BURST_MAX : 1]; // konce oken poslednich odpovedi, kruh
uint8_t bot_burst_head; // nejstarsi z poslednich BOT_BURST_MAX odpovedi
#endif
CayenneLPP telemetry;
unsigned long set_radio_at, revert_radio_at;
float pending_freq;
float pending_bw;
uint8_t pending_sf;
uint8_t pending_cr;
int matching_peer_indexes[MAX_CLIENTS];
#if defined(WITH_RS232_BRIDGE)
RS232Bridge bridge;
#elif defined(WITH_ESPNOW_BRIDGE)
ESPNowBridge bridge;
#endif
void putNeighbour(const mesh::Identity& id, uint32_t timestamp, float snr);
#if MAX_HEARD_NODES
void putHeardNode(const mesh::Identity& id, uint32_t advert_timestamp, uint8_t type,
int32_t lat, int32_t lon, const char* name,
int8_t snr, int8_t rssi, const mesh::Packet* pkt);
void formatNodesReply(char* reply, int max_len, uint16_t offset);
#endif
#if RXLOG_SIZE
void captureRx(const mesh::Packet* pkt);
void formatRxLogReply(char* reply, int max_len, uint32_t cursor);
#endif
#if PKTFEED_SIZE
void stagePktFeed(const uint8_t raw[], int len);
void commitPktFeed(const mesh::Packet* pkt);
void formatPktFeedReply(char* reply, int max_len, uint32_t cursor);
#endif
#if defined(BOT_CHANNEL_PSK) || defined(FILTER_CHANNEL_PSKS)
// CUSTOM (TeTeHacko): shared channel plumbing. Definitions in ChannelCommon.h,
// included at the bottom of MyMesh.cpp.
void channelsInit();
int channelAddFromPsk(const char* psk_hex, int psk_len, uint8_t flag);
void onChannelText(mesh::Packet* packet, int chan_idx, const char* sender, const char* msg);
#endif
#ifdef FILTER_CHANNEL_PSKS
// CUSTOM (TeTeHacko): deny-list forwarding filter. Definitions in ChannelFilter.h.
bool filterDenied(const char* sender) const;
bool filterHandleCommand(const char* command, char* reply, int reply_max);
#endif
#ifdef BOT_CHANNEL_PSK
// CUSTOM (TeTeHacko): channel bot. Definitions in ChannelBot.h, included at
// the bottom of MyMesh.cpp. See that file for why this lives in the analyzer
// build rather than in companion_radio.
void botInit();
void botOnChannelText(mesh::Packet* packet, const char* sender, const char* msg);
bool botTriggerMatches(const char* text) const;
void botFormatPath(char* out, const mesh::Packet* pkt) const;
int botCommandReply(char* out, int max_len, const char* cmd, const mesh::Packet* pkt);
int botScanCommands(char* out, int max_len, const char* text, const mesh::Packet* pkt);
void botSendReply(const mesh::Packet* pkt, const char* text);
bool botPeerAllowed(const char* name);
bool botHandleCommand(const char* command, char* reply);
#endif
// CUSTOM (TeTeHacko): `fairness [on|off|grid|cap ...|refill ...]` CLI. Defined in MyMesh.cpp.
bool fairnessHandleCommand(const char* command, char* reply, int reply_max);
// CUSTOM (TeTeHacko): keyless deny-forward by channel hash. Definitions in ChannelFilter.h.
bool filterHashDenied(const mesh::Packet* packet);
bool filterHashHandleCommand(const char* command, char* reply, int reply_max);
// `filter dryrun [on|off]` and `filter age [<min>|off]`. Definitions in ChannelFilter.h.
bool filterMiscHandleCommand(const char* command, char* reply, int reply_max);
// Refill interval in ms: persisted pref (seconds) if set, else the build default.
uint32_t fairGroupRefillMs() const {
return _prefs.fair_group_refill_s ? (uint32_t)_prefs.fair_group_refill_s * 1000 : FAIRNESS_GROUP_REFILL_MS;
}
uint32_t fairSenderRefillMs() const {
return _prefs.fair_sender_refill_s ? (uint32_t)_prefs.fair_sender_refill_s * 1000 : FAIRNESS_SENDER_NORMAL_REFILL_MS;
}
uint32_t fairAdvertRefillMs() const {
return _prefs.fair_advert_refill_s ? (uint32_t)_prefs.fair_advert_refill_s * 1000 : FAIRNESS_SENDER_LOW_REFILL_MS;
}
uint8_t handleLoginReq(const mesh::Identity& sender, const uint8_t* secret, uint32_t sender_timestamp, const uint8_t* data, bool is_flood);
uint8_t handleAnonRegionsReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
uint8_t handleAnonOwnerReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
uint8_t handleAnonClockReq(const mesh::Identity& sender, uint32_t sender_timestamp, const uint8_t* data);
int handleRequest(ClientInfo* sender, uint32_t sender_timestamp, uint8_t* payload, size_t payload_len);
mesh::Packet* createSelfAdvert();
File openAppend(const char* fname);
bool isLooped(const mesh::Packet* packet, const uint8_t max_counters[]);
protected:
float getAirtimeBudgetFactor() const override {
return _prefs.airtime_factor;
}
bool allowPacketForward(const mesh::Packet* packet) override;
// Šířku path hashe volí ODESÍLATEL, takže musí přijít z prefs tohohle uzlu.
// Díky tomuhle overridu ji dostanou i volání send*(), která ji nepředávají
// explicitně (ACKy, PATH-return, zerohop odpovědi sousedovi).
uint8_t getSelfPathHashSize() const override { return _prefs.path_hash_mode + 1; }
#if defined(BOT_CHANNEL_PSK) || defined(FILTER_CHANNEL_PSKS)
// CUSTOM (TeTeHacko): both are no-op virtuals in mesh::Mesh, which is the only
// reason a repeater is normally deaf to channel traffic. Overriding them does
// NOT affect forwarding by itself -- Mesh::onRecvPacket() calls routeRecvPacket()
// either way (Mesh.cpp:237-259). The ChannelFilter DOES veto forwarding of
// matched packets, via packet->markDoNotRetransmit() (same mechanism the ANON
// branch uses at Mesh.cpp:229).
int searchChannelsByHash(const uint8_t* hash, mesh::GroupChannel channels[], int max_matches) override;
void onGroupDataRecv(mesh::Packet* packet, uint8_t type, const mesh::GroupChannel& channel,
uint8_t* data, size_t len) override;
#endif
// CUSTOM (TeTeHacko): FairnessLimiter veto. mesh::Mesh consults this as the
// LAST condition of every forward decision, so a token is only taken for a
// packet that would otherwise transmit. Buckets have a runtime kill switch
// (`fairness on|off`), the advert window its own (`fairness advert 0`).
// What gets shed is also summed as airtime -- in dry-run, what WOULD be.
bool takeForwardingRateLimit(const mesh::Packet* packet) override {
bool ok = fairness_limiter.allowPacket(packet, _ms->getMillis());
FairShed why = fairness_limiter.lastShed();
if (why != FAIR_SHED_NONE) fairness_limiter.addShedAirtime(why, _radio->getEstAirtimeFor(packet->getRawLength()));
return ok;
}
const char* getLogDateTime() override;
void logRxRaw(float snr, float rssi, const uint8_t raw[], int len) override;
void logRx(mesh::Packet* pkt, int len, float score) override;
void logTx(mesh::Packet* pkt, int len) override;
void logTxFail(mesh::Packet* pkt, int len) override;
int calcRxDelay(float score, uint32_t air_time) const override;
uint32_t getRetransmitDelay(const mesh::Packet* packet) override;
uint32_t getDirectRetransmitDelay(const mesh::Packet* packet) override;
int getInterferenceThreshold() const override {
return _prefs.interference_threshold;
}
bool getCADEnabled() const override {
return _prefs.cad_enabled;
}
int getAGCResetInterval() const override {
return ((int)_prefs.agc_reset_interval) * 4000; // milliseconds
}
uint8_t getExtraAckTransmitCount() const override {
return _prefs.multi_acks;
}
#if ENV_INCLUDE_GPS == 1
void applyGpsPrefs() {
if (sensors.getSettingByKey("gps_interval") != nullptr) {
// gps_interval was introduced only for EnvironmentSensorManager
// and has little interest ... kept only as a legacy
char interval[11];
snprintf(interval, sizeof(interval), "%lu", (unsigned long)_prefs.gps_interval);
sensors.setSettingValue("gps_interval", interval);
}
_prefs.getGpsPrefs()->apply(sensors);
// 2 = duty cycle -- apply() only knows on/off, and a duty-cycled node must
// not come back from a reboot with GPS powered forever
if (_prefs.gps_enabled == 2) sensors.setSettingValue("gps", "2");
}
#endif
mesh::DispatcherAction onRecvPacket(mesh::Packet* pkt) override;
void onAnonDataRecv(mesh::Packet* packet, const uint8_t* secret, const mesh::Identity& sender, uint8_t* data, size_t len) override;
int searchPeersByHash(const uint8_t* hash) override;
void getPeerSharedSecret(uint8_t* dest_secret, int peer_idx) override;
void onAdvertRecv(mesh::Packet* packet, const mesh::Identity& id, uint32_t timestamp, const uint8_t* app_data, size_t app_data_len);
void onPeerDataRecv(mesh::Packet* packet, uint8_t type, int sender_idx, const uint8_t* secret, uint8_t* data, size_t len) override;
bool onPeerPathRecv(mesh::Packet* packet, int sender_idx, const uint8_t* secret, uint8_t* path, uint8_t path_len, uint8_t extra_type, uint8_t* extra, uint8_t extra_len) override;
void onControlDataRecv(mesh::Packet* packet) override;
void sendFloodReply(mesh::Packet* packet, unsigned long delay_millis, uint8_t path_hash_size);
public:
MyMesh(mesh::MainBoard& board, mesh::Radio& radio, mesh::MillisecondClock& ms, mesh::RNG& rng, mesh::RTCClock& rtc, mesh::MeshTables& tables);
void begin(FILESYSTEM* fs);
void sendNodeDiscoverReq();
const char* getFirmwareVer() override { return FIRMWARE_VERSION; }
const char* getBuildDate() override { return FIRMWARE_BUILD_DATE; }
const char* getRole() override { return FIRMWARE_ROLE; }
const char* getNodeName() { return _prefs.node_name; }
NodePrefs* getNodePrefs() {
return &_prefs;
}
bool isHiddenNode() const {
return _prefs.advert_interval == 0 && _prefs.flood_advert_interval == 0;
}
void savePrefs() override {
_cli.savePrefs(_fs);
}
void sendFloodScoped(const TransportKey& scope, mesh::Packet* pkt, uint32_t delay_millis, uint8_t path_hash_size);
// CommonCLICallbacks
void applyTempRadioParams(float freq, float bw, uint8_t sf, uint8_t cr, int timeout_mins) override;
bool formatFileSystem() override;
void sendSelfAdvertisement(int delay_millis, bool flood) override;
void updateAdvertTimer() override;
void updateFloodAdvertTimer() override;
void setLoggingOn(bool enable) override { _logging = enable; }
void eraseLogFile() override {
_fs->remove(PACKET_LOG_FILE);
}
void dumpLogFile() override;
void setTxPower(int8_t power_dbm) override;
void formatNeighborsReply(char *reply) override;
void removeNeighbor(const uint8_t* pubkey, int key_len) override;
void formatStatsReply(char *reply) override;
void formatRadioStatsReply(char *reply) override;
void formatPacketStatsReply(char *reply) override;
void startRegionsLoad() override;
bool saveRegions() override;
void onDefaultRegionChanged(const RegionEntry* r) override;
mesh::LocalIdentity& getSelfId() override { return self_id; }
void saveIdentity(const mesh::LocalIdentity& new_id) override;
void clearStats() override;
// reply_max = usable reply capacity. Default 150 keeps the mesh admin CLI reply
// inside one LoRa packet; the local console (USB/BLE, big buffer) passes more so
// the paged analyzer replies (nodes/rxlog) can use big pages. Explicit parameter
// on purpose — a forged sender_timestamp must never be able to grow the reply.
void handleCommand(uint32_t sender_timestamp, char* command, char* reply, int reply_max = 150);
void loop();
#if defined(WITH_BRIDGE)
void setBridgeState(bool enable) override {
if (enable == bridge.isRunning()) return;
if (enable)
{
bridge.begin();
}
else
{
bridge.end();
}
}
void restartBridge() override {
if (!bridge.isRunning()) return;
bridge.end();
bridge.begin();
}
#endif
// To check if there is pending work
bool hasPendingWork() const;
// CUSTOM (TeTeHacko): for the TX stall watchdog (helpers/NodeMaintenance.h).
int txQueued() const { return _mgr->getOutboundTotal(); }
int txDue() const { return _mgr->getOutboundCount(_ms->getMillis()); }
bool setRxBoostedGain(bool enable) override;
#if defined(USE_LR2021)
virtual bool configSideDetectors(const uint8_t sideDetSFs[], uint8_t num, float bw) override;
#endif
};