- Opt-in upload of header-only packet records and repeater/room server
adverts to map.meshcoreopen.org about once a minute; payloads, channel
and DM hashes and transport codes are stripped on the phone, locations
snapped to a ~2 km grid, install ID rotates daily
- One-time opt-in dialog on first radio connection; toggle and status in
App settings
- Local / Online / Both switch on the map screen with online repeater
hexagons, links, add-to-contacts and manage
- Node purchase banner on the connect screen (affiliate link, disclosed)
- Privacy policy and network map documentation
- Translations for all locales
- Image entries are stamped with their channel ID before the migration is
marked done, so an interrupted run repeats it instead of leaving them
unstamped (and invisible) forever.
- Channel message/data frames that arrive before this session's slot map
is confirmed are held and replayed once it is. Current firmware only
sends them in reply to SYNC_NEXT_MESSAGE, which already waits; this
guards against a stale saved map filing them under the wrong channel.
Channel messages, settings, region, order and images were persisted by
radio slot index, so a slot reused for a different channel inherited the
old channel's history and settings (#359).
- Channel.storageId: first 8 bytes of SHA-256("meshcore-channel:" + psk).
- All per-channel stores key by channel ID; in-memory state stays by slot.
- The connector keeps a slot -> channel ID map, diffs it against the saved
map on every channel sync and reloads slots whose channel changed.
- Queued channel frames wait until this session's map is confirmed.
- One-shot per-radio migration from slot keys, using the cached channel
list the legacy data was written under; rerun-safe if interrupted.
- Deleting a channel clears its data; a channel removed elsewhere keeps its
history and gets it back when re-added. A PSK edit keeps its place in
the custom order.
- Slots sharing a PSK share history and settings.
- Image entries record their channel ID; a slot change resets that slot's
in-progress reassembly.
- Extract reusable widgets (chat composer/send pipeline, message bubble
frame, reaction chips, path map scaffold, radio settings dialog,
translation settings section, map POI clusters, nav tiles, etc.) and
slim down the screens that used them
- Map: hide/remove markers with restore, confirm before setting node
location, POI clustering, semantics labels
- Map cache: cancellable downloads and a bulk tile limit
- Repeater: unsaved-changes guard, CLI search/copy/share transcript,
framed-command debug preview, disconnected banner
- Confirm before clearing chats and debug logs
- Keep cached unread totals in sync on per-contact/channel updates
- Move remaining hardcoded strings into l10n and translate the 98 new
keys into all 17 non-English locales
Merge dev (#588 share location, #436 discovered-contact import/export)
into fix/review-fixes-and-issue-batch. Conflicts: keep the node-scan
button alongside dev's import/export menu; take dev's marker label
prompt.
Share location (#588):
- Never share a missing or 0,0 radio position; hide the chat action and
show "Your radio has no location set"
- Sanitise marker labels ('|' -> '/', newlines -> spaces) on every path
- One shared MarkerLabelDialog owning its controller/focus node, with
keyboard submit, replacing three copies
- Map pins default to "Point of interest" again; "Share my location"
uses the node name
- Location shares honour the send cooldown and handle send errors
Discovered-contact import/export (#436):
- Per-entry decoding with imported/skipped/invalid counts; reject keys
that are not 32 bytes; skip in-file duplicates and the radio's own key
- Strip routing paths on import and stop exporting them; clamp future
timestamps; enforce the discovered-contact cap; require a connection;
2 MB file limit
- Export via in-memory XFile (fixes web); pass sharePositionOrigin for
iPad (also GPX export and image save); macOS user-selected read-write
entitlement for save dialogs
Docs: cover share location, import/export, node scan, TCP reconnect,
channel auto-resend options, arrival ordering, badge, password length
and image limits.
Translations for all new strings in every locale.
Resolve pubspec.yaml conflict (keep dev's share_plus ^13.3.1 and
file_selector), regenerate localizations, and add the missing
map_labelUpdateHint translation for all locales.
Review fixes:
- Keep stored message history beyond the 200-message window; stop
messages leaking between radios; reset link/session state on disconnect
- Accept firmware's 176-byte RX frames over USB/TCP
- Hold APP_START during contact sync; contact-sync watchdog; replay DMs
from not-yet-known senders; tombstone late command replies; finish
channel sync on ERR_NOT_FOUND; fail region-scoped sends cleanly
- DM retry watchdog when RESP_CODE_SENT never arrives; late repeater CLI
replies; ACK hash collisions; UTF-8-safe name truncation
- Image pipeline: delete-during-decode, lifecycle cancels, decoder memory
release, entry cap, dead worker recovery, atomic model writes
- Storage: deterministic reaction hash across web/native, Smaz
double-decode, per-entry parsing, per-radio path history and regions,
review-mode data isolation
- UI: safe channel slot selection, byte-length name limits, double-send
guard, mounted checks, localized hardcoded strings
- Skip persisted-store reload on repeat SELF_INFO
Features:
- Radio default flood scope (firmware ver 11+) and explicit unscoped
sends (ver 12+)
- Scan for nearby nodes (#570)
- Optional distinct first-hop repeater counting for channel resend (#589)
- Optional region next to hop count (#580)
Issues:
- Message text follows system font size (#569)
- Repeater/room password field accepts 20 chars (#576)
- TCP auto-reconnect and keepalive (#571)
- Order feeds by local receive time; flag future timestamps (#584)
- Coding rate help text (#568), French "Favoris" (#575)
- iOS/macOS app badge now clears
Translations for all new strings in every locale.
- Default evictDiscoveredContactsEnabled to true so the 500-entry cap stays
in effect unless the user opts out
- Evict until under the cap when adding, so an oversized list recovers
- Pass the cap into the localized subtitle instead of hard-coding 500
- Fix German title and subtitle wording
- Save: block double taps, send radio config first, show an error if
persisting the setting fails
- Restore untranslated.json to match dev
Store reviewers have no MeshCore radio, so they could not reach any
screen past Connect or test the Android Auto messaging notifications.
- Long-press the "MeshCore Open" title on the Connect screen to enter
review mode on any platform
- A simulated radio speaks the companion protocol as a fourth transport,
so sync, messages, ACKs, notifications and notification replies run
through the normal code paths
- Seeded contacts, channels and history; a new incoming message every
45 s, auto-replies a few seconds after sending, and a banner with
"Send test message" and "Exit"
- Review data uses its own fixed key scope and is cleared on entry, exit
and at startup; the review scope never adopts legacy unscoped keys,
and channel mutes changed during review are restored
- Code lives in lib/review_mode/ with tests in test/review_mode/
- Message notifications use Android MessagingStyle with Reply, Mark as read,
and Mute channel actions, so they work in Android Auto and on watches
- Replies go through the normal send path (length limits, SMAZ, Cyr2Lat,
retries), split into up to 3 messages, and report failures
- Declare Android Auto notification support and register the action receiver
- Add a bell icon to channel chat to mute/unmute; unify the channel mute key
so unnamed channels mute correctly
- Update README and docs for Android Auto support
floodScopeKeyForRegion treats `foo` and `#foo` as the same scope, so a
region listed both ways matched every packet twice and was always reported
as ambiguous. Also consider the default region when resolving.
- Updated LoRa airtime calculations in `lora_airtime_test.dart` to reflect new reference values.
- Introduced new tests for LDRO behavior and preamble symbol calculations.
- Added `contact_path_width_test.dart` to validate path hash width handling in contacts.
- Enhanced `model_changes_test.dart` to ensure legacy data migration works correctly.
- Created `remote_node_stats_test.dart` to decode and validate remote node statistics.
- Implemented `map_marker_parse_test.dart` for parsing marker text with coordinate validation.
- Developed `map_tile_cache_key_test.dart` to ensure API keys are excluded from cache keys.
- Added `message_retry_failure_test.dart` to test message retry service behavior on failures.
- Extended `path_history_service_test.dart` to preserve learned state across path attempts.
- Enhanced `received_image_store_test.dart` to handle concurrent writes and review fixes.
- Implemented `repeater_command_service_test.dart` to validate command response handling.
- Created `store_tolerant_parsing_test.dart` to ensure stores skip malformed records gracefully.
- Cleared untranslated JSON file for localization updates.
Sixth review round:
- disconnect(manual: true) joining an in-flight automatic teardown now
still marks it manual (and cancels the reconnect timer / stops the
background service), so a user-initiated disconnect can no longer be
followed by an auto-reconnect scheduled by the teardown it joined.
- _shouldAutoReconnect is false once _disposed, so a teardown that
outlives disposal cannot arm a timer that calls connect() on a disposed
connector.
- connect()/connectUsb()/connectTcp() and UsbSerialService.connect()
re-check the connection state after awaiting the in-flight teardown.
The await is a suspension point, so two callers could previously pass
the initial guard, resume together and both run the open sequence.
Fifth review round:
- MeshCoreConnector.dispose() sets _disposed, and _setState(),
notifyListeners() and markNotifyDirty() no-op afterwards. A teardown
started before disposal can still be running (the USB native close waits
out the kernel's closing_wait off the UI isolate), and its tail would
otherwise call notifyListeners() on a disposed ChangeNotifier.
- _handleSerialData() now only drops callbacks in the teardown states
(disconnecting/disconnected) instead of everything that is not
`connected`, so data arriving in the `connecting` window is still
ingested and buffered by the frame decoder.
Fourth review round:
- UsbSerialService.connect() now waits for _activeDisconnect before it
claims the `connecting` status, covering the Android USB-host path too;
previously the wait sat inside the desktop branch, so an Android
reconnect could still be overwritten by the old teardown.
- MeshCoreConnector.disconnect() is now a re-entrant-safe wrapper around
_disconnectInternal() that publishes the teardown as _activeDisconnect,
and connect()/connectUsb()/connectTcp() join it before starting. The
transport-level guard alone could not prevent the connector's own
teardown tail from setting the state back to `disconnected` after a new
connection was up. Repeat disconnect() calls now join the in-flight
teardown instead of returning early while it is still running.
flutter analyze clean; flutter test 570 passing, 2 pre-existing failures
in message_url_image_helper_test.dart (identical on a stashed tree);
flutter build linux --debug succeeds.
- Made Crockford-matching regex slighlty stricter (not allowing U)
- Match arbitrarily long multi-code-point joined emoji
- Added more validation checks for potential emoji, including that it's
a single grapheme
- Added more unit tests for emoji parsing
- For reactions whose targets we can't find, display MC1-style
reactions as normal messages. Continue old beavior of silently
dropping unmatched MC-Open reactions.
Part of PR #537
In meshcore_connector.dart,
Initialize _processedContactReactions in outgoing reactions for DMs
In channel_message_store.dart & message_store.dart,
Handle reaction lists properly to un-break message loading.
In channel chat screen, clicking a reaction emoji brings up a popup
listing the received emoji reactions and their senders.
Also fixes a bug that prevented displaying the count numbers on
reactions. Code existed to display counts for multiples, but the
deduplication failed to differentiate between senders and was tossing
them out.
There is still another preexisting bug, not fixed by this commit, that
over-counts sent reactions in rooms.