config: git-ignored BLE PIN secret + SenseCap SHT41/INA226 + nRF52 framework symlink

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
This commit is contained in:
tthandClaude Opus 4.8 committed 2026-07-11 19:21:11 +02:00
1 parent 434e306430
commit 0250816a40
4 files changed
+69 -3

No files matched your search

+9 -1
View File
@@ -13,6 +13,12 @@ extra_configs =
variants/*/platformio.ini
platformio.local.ini
; Default BLE pairing PIN. This is a non-secret placeholder; override it with
; your real PIN in the git-ignored platformio.local.ini ([secrets] ble_pin=...)
; so the real value never lands in the committed tree.
[secrets]
ble_pin = 123456
[arduino_base]
framework = arduino
monitor_speed = 115200
@@ -84,7 +90,9 @@ platform_packages =
; use internal fork that includes patch to ble stack to prevent firmware lockup during rapid connect/disconnect
; https://github.com/meshcore-dev/MeshCore/pull/1177
; https://github.com/meshcore-dev/MeshCore/pull/1295
framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301
; LOKÁLNÍ build hack (TeTeHacko): shallow git fetch krátkého SHA neumí, tak plný klon + symlink.
; upstream: framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301
framework-arduinoadafruitnrf52 @ symlink:///home/user/projects/meshcore-nrf52-fw
extra_scripts = create-uf2.py
build_flags = ${arduino_base.build_flags}
-D NRF52_PLATFORM
+25
View File
@@ -0,0 +1,25 @@
# CUSTOM (TeTeHacko): custom version and build date/time for the `ver` command.
# Injects FIRMWARE_VERSION (v1.16.0-tth-<git sha>, '+' = dirty tree) and
# FIRMWARE_BUILD_DATE (compile time). NOTE: the define changes every build =
# full rebuild each time (~10-30 s) -- the price for an always-fresh timestamp.
Import("env")
import subprocess
from datetime import datetime
sha = "nogit"
dirty = ""
try:
cwd = env.subst("$PROJECT_DIR")
sha = subprocess.check_output(["git", "rev-parse", "--short", "HEAD"], cwd=cwd).decode().strip()
if subprocess.call(["git", "diff", "--quiet"], cwd=cwd) != 0:
dirty = "+"
except Exception:
pass
version = "v1.16.0-tth-%s%s" % (sha, dirty)
build_date = datetime.now().strftime("%d %b %Y %H:%M")
env.Append(CPPDEFINES=[
("FIRMWARE_VERSION", env.StringifyMacro(version)),
("FIRMWARE_BUILD_DATE", env.StringifyMacro(build_date)),
])
print("build_version.py: %s (Build: %s)" % (version, build_date))
+34 -1
View File
@@ -51,6 +51,39 @@ build_flags =
build_src_filter = ${SenseCap_Solar.build_src_filter}
+<../examples/simple_repeater/*.cpp>
; CUSTOM (TeTeHacko): repeater + BLE UART console (wireless querying, no USB).
; The s140 SoftDevice is already linked by the SenseCap_Solar base, so the BLE stack is available.
[env:SenseCap_Solar_repeater_ble]
extends = SenseCap_Solar
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_upload.maximum_size = 708608
; custom version + build timestamp for `ver` (see build_version.py)
extra_scripts = ${nrf52_base.extra_scripts}
pre:variants/sensecap_solar/build_version.py
build_flags =
${SenseCap_Solar.build_flags}
-D ADVERT_NAME='"SenseCap_Solar Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; Real BLE PIN lives ONLY in the git-ignored platformio.local.ini ([secrets] ble_pin).
; The committed default (123456) is a non-secret placeholder.
-D BLE_PIN_CODE=${secrets.ble_pin}
; INA226 defaults to 0x44 in EnvironmentSensorManager = collision with SHT41
; (false detection, garbage in telemetry). 0x40 is the real INA226 HW default.
-D TELEM_INA226_ADDRESS=0x40
; GPS detection (1 s window for NMEA after power-on) is a race and randomly
; fails. When it loses, the gps setting is not exposed and the persisted
; _prefs.gps_enabled cannot be applied at boot -> GPS (and RTC sync!) stays
; dead until the next lucky boot. The P1-Pro always has GPS -> skip detection.
; GPS on/off itself persists via the `gps on|off` CLI command (NodePrefs).
; Note: the L76K draws ~25-35 mA — plan for the extra power on a solar node.
-D ENV_SKIP_GPS_DETECT=1
; -D MESH_PACKET_LOGGING=1
build_src_filter = ${SenseCap_Solar.build_src_filter}
+<../examples/simple_repeater/*.cpp>
[env:SenseCap_Solar_room_server]
extends = SenseCap_Solar
build_flags =
@@ -72,7 +105,7 @@ build_flags =
${SenseCap_Solar.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_PIN_CODE=${secrets.ble_pin}
-D OFFLINE_QUEUE_SIZE=256
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
+1 -1
View File
@@ -99,7 +99,7 @@ build_flags = ${t1000-e.build_flags}
-I examples/companion_radio/ui-orig
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D BLE_PIN_CODE=${secrets.ble_pin}
-D BLE_TX_POWER=0
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1