Merge pull request #3754 from netrunnereve/bluetooth-name

Allow the user to set a custom bluetooth name using the cli
This commit is contained in:
Liam Cottle authored and GitHub committed 2026-11-15 20:01:46 +13:00
commit 04afba03ba
4 files changed
+45 -1

No files matched your search

+12
View File
@@ -413,6 +413,18 @@ Radio parameters are common to all roles and handled by `CommonRadioPrefs`.
---
#### Change BLE name
**Usage:**
- `get ble.name`
- `set ble.name <name>`
**Parameters:**
- `name`: New BLE name
**Note:** By default the BLE name is `Meshcore-` followed by the node name. If `<name>` is empty the BLE name will be reset to the aforementioned default. These commands require a reboot to take effect.
---
### Wifi
#### Get status
+24
View File
@@ -2154,6 +2154,30 @@ bool MyMesh::handleCommand(const char* command, uint32_t sender_timestamp, char*
sprintf(reply, "> pin is now %06d", _prefs.ble_pin);
return true;
}
if (strcmp(command, "set ble.name") == 0) {
_prefs.ble_name[0] = 0;
savePrefs();
sprintf(reply, "> BLE name reset to %s%s (reboot to apply)", BLE_NAME_PREFIX, _prefs.node_name);
return true;
}
if (memcmp(command, "set ble.name ", 13) == 0) {
if (AdvertDataParser::isValidName(&command[13])) {
StrHelper::strncpy(_prefs.ble_name, &command[13], sizeof(_prefs.ble_name));
savePrefs();
sprintf(reply, "> BLE name is now %s (reboot to apply)", _prefs.ble_name);
} else {
strcpy(reply, "Error, bad chars");
}
return true;
}
if (strcmp(command, "get ble.name") == 0) {
if (_prefs.ble_name[0]) {
sprintf(reply, "> %s", _prefs.ble_name);
} else {
sprintf(reply, "> %s%s", BLE_NAME_PREFIX, _prefs.node_name);
}
return true;
}
#ifdef ENABLE_WIFI_INTERFACE
if (memcmp(command, "set wifi.ssid ", 14) == 0) {
+2
View File
@@ -31,6 +31,7 @@ public:
float tx_delay_factor = 0;
float direct_tx_delay_factor = 0;
uint32_t ble_pin = 0;
char ble_name[32] = {0};
uint8_t advert_loc_policy = 0;
uint8_t buzzer_quiet = 0;
uint8_t vibe_quiet = 0;
@@ -224,6 +225,7 @@ private:
def("defs_nm", _parent->default_scope_name, sizeof(_parent->default_scope_name));
def("defs_key", (void *) _parent->default_scope_key, sizeof(_parent->default_scope_key));
def("pin", _parent->ble_pin);
def("ble_name", _parent->ble_name, sizeof(_parent->ble_name));
def("buzz_q", _parent->buzzer_quiet);
def("vibe_q", _parent->vibe_quiet);
def("auto_add", _parent->autoadd_config); // bitmask for auto-add contacts config
+7 -1
View File
@@ -215,7 +215,13 @@ void setup() {
// add bluetooth interface
#if defined(BLE_PIN_CODE)
bluetooth_interface.begin(BLE_NAME_PREFIX, the_mesh.getNodePrefs()->node_name, the_mesh.getBLEPin());
char *prefix = BLE_NAME_PREFIX;
char *ble_name = the_mesh.getNodePrefs()->node_name;
if (the_mesh.getNodePrefs()->ble_name[0]) {
prefix = "";
ble_name = the_mesh.getNodePrefs()->ble_name;
}
bluetooth_interface.begin((const char *) prefix, ble_name, the_mesh.getBLEPin());
interface_manager.addInterface(InterfaceType::Bluetooth, &bluetooth_interface);
#endif