docs: dock-quiet is gone; BLE goes dark when another central holds the link; ble pin over the mesh
pub-release / release (push) Successful in 23m57s

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
tthandClaude Opus 5.5 committed 2026-11-03 01:47:27 +01:00
1 parent c1eaa6f98b
commit 10f0349207
1 file changed
+5 -5
+5 -5
View File
@@ -42,9 +42,9 @@ twice a day; everything below is on top of that. Our code is marked
* `dfu [uf2|serial|ota]` (deterministic reboot into the bootloader), `blink`,
`txpwr` with RadioLib's verdict, `i2c` bus scan, TX-failure counters in the
status reply, reset reason printed at boot.
* Text console over BLE next to USB ("dock-quiet": BLE stays dark while USB
holds DTR), `ble on|off` saved across reboots (`RPT_BLE_DEFAULT_OFF`: starts
off), persisted connection TX power (`blepwr`), `bleconn`, a
* Text console over BLE next to USB, `ble on|off` saved across reboots
(`RPT_BLE_DEFAULT_OFF`: starts off), own BLE PIN (`ble pin`), persisted
connection TX power (`blepwr`), `bleconn`, a
non-blocking BLE TX pump and connection parameters that hold on a weak link.
* `RADIO_DIAG` build flag: `radiostat` / `radiokick` for an SX1262 receiver
that stops receiving.
@@ -103,8 +103,8 @@ SenseCAP Solar, RAK4631, T1000-E, Heltec T114) add the `nodes` / `rxlog` /
USB or BLE ([meshcore-repeater-observer](https://git.rfa.cz/tth-pub/meshcore-repeater-observer)).
The BLE console is **off** after flashing (`RPT_BLE_DEFAULT_OFF`). It has no
login of its own, only the BLE PIN, and the build's PIN is the public
placeholder `123456`. So first set your own, in the USB console:
`ble pin <6 digits>` (saved, survives a reboot and a reflash; it also drops
placeholder `123456`. So first set your own -- in the USB console, or as
admin over the mesh (remote CLI in the app): `ble pin <6 digits>` (saved, survives a reboot and a reflash; it also drops
every existing bond, so paired devices pair again). Only then `ble on` --
these builds refuse it while the PIN is still the placeholder. `ble` shows
whether the PIN is `own` or `build default`, never the PIN itself. Releases