simple_room_server: dfu, radio silence watchdog and get boot via NodeMaintenance
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
2ced8502a0
commit
a8f0c3dca6
3 files changed
+17
-3
No files matched your search
@@ -718,7 +718,7 @@ so the icon and the Grafana percentage tell one story.
|
||||
|
||||
---
|
||||
|
||||
#### Radio silence watchdog (repeater and sensor)
|
||||
#### Radio silence watchdog (repeater, sensor, room server)
|
||||
**Usage:**
|
||||
- `get radio.silence`
|
||||
- `set radio.silence <minutes>`
|
||||
@@ -735,7 +735,7 @@ To keep a quiet site out of a reboot loop, each such reboot doubles the threshol
|
||||
|
||||
---
|
||||
|
||||
#### Reboot into the bootloader (repeater and sensor, nRF52, local console only)
|
||||
#### Reboot into the bootloader (repeater, sensor, room server; nRF52, local console only)
|
||||
**Usage:**
|
||||
- `dfu [uf2|serial|ota]`
|
||||
|
||||
@@ -743,7 +743,7 @@ To keep a quiet site out of a reboot loop, each such reboot doubles the threshol
|
||||
|
||||
---
|
||||
|
||||
#### Why the board last reset (repeater and sensor)
|
||||
#### Why the board last reset (repeater, sensor, room server)
|
||||
**Usage:**
|
||||
- `get boot`
|
||||
|
||||
|
||||
@@ -950,6 +950,10 @@ void MyMesh::handleCommand(uint32_t sender_timestamp, char *command, char *reply
|
||||
command += 3;
|
||||
}
|
||||
|
||||
// CUSTOM (TeTeHacko): dfu (local only), radio silence watchdog, `get boot`.
|
||||
extern bool maintHandleCommand(uint32_t sender_timestamp, const char* command, char* reply);
|
||||
if (maintHandleCommand(sender_timestamp, command, reply)) return;
|
||||
|
||||
// handle ACL related commands
|
||||
if (memcmp(command, "setperm ", 8) == 0) { // format: setperm {pubkey-hex} {permissions-int8}
|
||||
char* hex = &command[8];
|
||||
|
||||
@@ -2,6 +2,7 @@
|
||||
#include <Mesh.h>
|
||||
|
||||
#include "MyMesh.h"
|
||||
#include <helpers/NodeMaintenance.h>
|
||||
|
||||
#ifdef ETHERNET_ENABLED
|
||||
#define ETHERNET_CLI_BANNER "MeshCore Room Server CLI"
|
||||
@@ -17,6 +18,12 @@ StdRNG fast_rng;
|
||||
SimpleMeshTables tables;
|
||||
MyMesh the_mesh(board, radio_driver, *new ArduinoMillis(), fast_rng, rtc_clock, tables);
|
||||
|
||||
// CUSTOM (TeTeHacko): dfu, radio silence watchdog, `get boot` -- see NodeMaintenance.h.
|
||||
static NodeMaintenance maint(board, radio_driver);
|
||||
bool maintHandleCommand(uint32_t sender_timestamp, const char* command, char* reply) {
|
||||
return maint.handleCommand(sender_timestamp, command, reply);
|
||||
}
|
||||
|
||||
void halt() {
|
||||
while (1) ;
|
||||
}
|
||||
@@ -31,6 +38,7 @@ void setup() {
|
||||
delay(1000);
|
||||
|
||||
board.begin();
|
||||
maint.printBootDiag();
|
||||
|
||||
#ifdef HAS_EXTERNAL_WATCHDOG
|
||||
external_watchdog.begin();
|
||||
@@ -86,6 +94,7 @@ void setup() {
|
||||
sensors.begin();
|
||||
|
||||
the_mesh.begin(fs);
|
||||
maint.begin(fs, the_mesh.getNodePrefs(), &the_mesh);
|
||||
|
||||
#ifdef DISPLAY_CLASS
|
||||
ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
|
||||
@@ -157,6 +166,7 @@ void loop() {
|
||||
#endif
|
||||
|
||||
the_mesh.loop();
|
||||
maint.loop();
|
||||
sensors.loop();
|
||||
#ifdef DISPLAY_CLASS
|
||||
ui_task.loop();
|
||||
|
||||
Reference in new issue
Block a user