tth
0c06994d1f
FwUpdate: diagnosis counters in 'failed' status (binary/dropped/text chunks, last manifest writer)
2026-11-13 01:57:56 +01:00
tth
b4d2601c8f
FwUpdate: transfer session id; binary chunks of another session are dropped
2026-11-13 01:49:55 +01:00
tth
3a7140fd51
FwUpdate: wrong base error names both sha prefixes
2026-11-13 01:33:28 +01:00
tth
232c2bb791
FwUpdate: fw bin -- the binary mesh protocol over the USB console (bench)
2026-11-13 01:30:14 +01:00
tth
dc13c5b286
FwUpdate: check the manifest from a RAM copy; flag a flash readback mismatch
2026-11-13 01:26:10 +01:00
tth
d1e893f692
FwUpdate binary: explicit chunk length (the node sees the payload padded to 16 B)
2026-11-13 01:18:27 +01:00
tth
4813340a69
FwUpdate binary: cap the missing-units reply at 150 B (companion frame limit); ota_mesh_push --text
2026-11-13 01:06:06 +01:00
tth
637b0d78b7
FwUpdate: binary firmware chunks over the mesh (REQ_TYPE_FW_OTA 0xF0)
2026-11-13 00:55:06 +01:00
tth
5f8788c4b4
FwUpdate: fw base prints the full sha256 of the running image (cache vs fresh)
2026-11-13 00:37:12 +01:00
tth
228e7a129b
FwUpdate: manifest check and verify run in loop(), not in the command handler
2026-11-13 00:23:05 +01:00
tth
aaca10958e
FwUpdate: format 2 delta packages (FwPatch in RAM), base checked with the manifest
2026-11-12 23:52:14 +01:00
tth
8d3e554ca3
FwPatch: in-place delta update (detools 0.53.0 vendored), dry run predicts the real run
2026-11-12 23:23:40 +01:00
tth
3cb3a458ce
FwUpdate: battery gate skipped on USB power (VBUS)
2026-11-12 22:29:21 +01:00
tth
daaf0c2267
FwUpdate: admin-pushed OTA without a bootloader change (bench stage)
2026-11-12 14:24:24 +01:00
tth and Claude Opus 5.5
ad4f53016c
sensors: every continuously converting chip sleeps between reads; INA chips identified
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 13:38:13 +01:00
tth and Claude Opus 5.5
b1e4e65c52
sensors: INA219 sleeps between telemetry reads
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 12:51:40 +01:00
tth and Claude Opus 5.5
6fe0c0f8e1
docs: power, budka sensor and BLE/LoRa coexistence notes under public paths
...
pub-release / release (push) Failing after 22s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 11:56:30 +01:00
tth and Claude Opus 5.5
d1d04f98ef
README: our part in Czech first, English below
...
pub-release / release (push) Successful in 26m11s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 11:45:57 +01:00
tth and Claude Opus 5.5
3c7d947887
gps duty: sync once a day, retry a failed window after 6 h
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 09:49:46 +01:00
tth and Claude Opus 5.5
84e4136a84
docs: gps duty vs upstream gps period; advert.loc, not "set loc"
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 09:27:26 +01:00
tth and Claude Opus 5.5
8d0b0dd164
Merge upstream/dev (80 commits) [upstream-sync]
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-11-12 09:22:19 +01:00
tth
40b6ccc0f2
Merge upstream/main (7 commits) [upstream-sync]
2026-11-12 09:16:19 +01:00
Liam Cottle
75737f548e
Merge pull request #3822 from liamcottle/fix/3811
...
fix for mdns string not compiling due to ambiguous overload
2026-11-12 16:10:48 +13:00
liamcottle
8c06b34156
fix for mdns string not compiling due to ambiguous overload
2026-11-12 16:08:30 +13:00
fdlamotte
cb09798408
Merge pull request #3819 from nullrouten0/fix/gps-nmea-buffer-tail
...
GPS: stop MicroNMEA reading past the NMEA buffer
2026-11-11 18:29:30 -04:00
nullrouten0 and Claude Sonnet 5.5
d1be1cbef0
GPS: stop MicroNMEA reading past the NMEA buffer
...
Add a 16-byte zeroed tail behind the 100-byte NMEA buffer. MicroNMEA's
fixed-width field skips can read a few bytes past the end of a malformed
sentence; with the tail those reads land on NUL bytes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com >
2026-11-11 17:58:36 +00:00
fdlamotte
8c88340e82
Merge pull request #3817 from AlexandrTyshchenko/docs/gps-guard-alert-telemetry
...
GPS guard: drop leftovers of the alert telemetry channel
2026-11-11 10:39:49 -04:00
Olexandr Tyshchenko
ace5230ff0
GPS guard: drop leftovers of the alert telemetry channel
...
#3813 removed the telemetry channel for the GPS time alert. Remove the
docs sentence that still described it and the now unused
GpsGuard::getAlertOffset().
2026-11-11 16:18:58 +02:00
fdlamotte
0ed9ba5724
Merge pull request #3801 from AlexandrTyshchenko/feature/gps-guard-time-wait
...
GPS guard: show "time wait" instead of "rej nofix" between fixes
2026-11-11 10:13:11 -04:00
fdlamotte
65eca34c5a
Merge pull request #3815 from fdlamotte/advert_loc_pref
...
CommonCLI: get/set loc to replace gps advert command
2026-11-11 10:11:49 -04:00
Florent
798b719caf
CommonCLI: get/set loc to replace gps advert command
2026-11-11 09:52:03 -04:00
fdlamotte
f349ead541
Merge pull request #3813 from fdlamotte/gps_guard_telem_removal
...
gps_guard: remove time alert telemetry
2026-11-11 08:06:44 -04:00
fdlamotte
092da136dc
Merge pull request #3811 from fdlamotte/mdns_using_char
...
companion_radio: rewrite mdns part removing String class
2026-11-11 07:58:59 -04:00
Florent
7de440c0d3
gps_guard: remove time alert telemetry
2026-11-11 07:58:39 -04:00
fdlamotte
d901822bdf
Merge pull request #3812 from fdlamotte/revert-3784
...
Revert "Merge pull request #3784 from Maxwell456/feature/repeater-his…
2026-11-11 07:52:27 -04:00
Florent
cefd4c76cf
Revert "Merge pull request #3784 from Maxwell456/feature/repeater-history"
...
This reverts commit 66d404eac8 , reversing
changes made to 1c4b237d73 .
2026-11-11 07:49:41 -04:00
Florent
5662e79a78
companion_radio: rewrite mdns part removing String class
2026-11-11 07:37:24 -04:00
fdlamotte
067fb64994
Merge pull request #3810 from fdlamotte/revert_rak13302_tests
...
tests: revert rak13302 tests
2026-11-11 07:30:25 -04:00
Florent
b3b227b773
tests: revert rak13302 tests
2026-11-11 07:26:01 -04:00
Liam Cottle
401fd6c037
Merge pull request #3807 from Valentin-Metz/fix/cli-reply-buffer-overflow
...
Fix stack-buffer overflow in CLI reply buffers
2026-11-11 17:37:42 +13:00
Valentin Metz
f02d9d9e47
Fix stack-buffer overflow in CLI reply buffers
...
The remote-CLI reply buffers in onPeerDataRecv() (repeater, room server,
sensor) and BaseChatMesh were sized temp[166] for a 5-byte datagram
header plus 161 bytes of reply. But MyMesh::handleCommand() first
reflects a 3-byte correlation prefix (e.g. 'aa|') into the reply, after
which CommonCLI commands may write up to 160 chars + NUL into the
remaining 158 bytes -- overflowing the buffer by 2 bytes (e.g. a full
'regions' listing via exportTo(reply, 160)).
Triggering this remotely crashes the node (observed as an unresponsive
repeater after a prefixed 'regions' query); the 2 out-of-bounds bytes
are a printable region-name character and a NUL.
Size the buffers for the full worst case instead:
5 header + 3 prefix + 160 reply + 1 NUL = 169.
Verified with a host ASan harness reproducing the exact layout:
prefixed 'regions' with a 25-region listing overflowed temp[166]
(BufStream::write, RegionMap.cpp) and now passes clean with temp[169];
unprefixed (serial) path unaffected.
2026-11-11 05:30:54 +01:00
Olexandr Tyshchenko
e1a445b967
GPS guard: show "time wait" instead of "rej nofix" between fixes
...
When the last GPS time check passed but there is no current trusted fix
(e.g. the GPS is asleep between periodic fixes), gps guard showed
"time rej nofix", which reads like a rejection although the clock is fine.
Show "time wait" instead. A real rejection without a trusted fix (GPS time
arriving while fixes are rejected) still shows "rej nofix".
2026-11-11 01:48:12 +02:00
fdlamotte
06719e6877
Merge pull request #3798 from AlexandrTyshchenko/feature/gps-baud-probe-list
...
GPS: GPS_BAUD_PROBE_LIST as a build flag for any NmeaGpsDriver; enable on Station G2/G3
2026-11-10 18:57:35 -04:00
Olexandr Tyshchenko
790f4d3f08
GPS: GPS_BAUD_PROBE_LIST as a build flag for any NmeaGpsDriver; enable on Station G2/G3
...
The probe list was wired only in variants/promicro/target.cpp. It is now the
default list of NmeaGpsDriver when GPS_BAUD_PROBE_LIST is set, so a variant
enables baud autodetection with a build flag alone.
Station G2 and G3 enable it: their Grove UART connector is used with M5Stack
Unit GPS modules, which default to 115200.
2026-11-10 23:51:29 +02:00
Florent
8f0da87099
Remove waveshare_c3_zero
...
- the PR was made against main instead of dev
- the board does not have a LORA chip, and there is no LORA
daughterboard associated with waveshare Zero ecosystem
2026-11-10 13:05:59 -04:00
fdlamotte
084a0700b2
Merge pull request #3677 from mloszand/Add-Waveshare-ESP32-C3-Zero-support
...
Add Waveshare ESP32-C3-Zero support
2026-11-10 12:51:15 -04:00
fdlamotte
66d404eac8
Merge pull request #3784 from Maxwell456/feature/repeater-history
...
Add min/max/avg history queries to repeaters
2026-11-10 12:42:53 -04:00
fdlamotte
1c4b237d73
Merge pull request #3770 from lihardyextreme/feature-mdns
...
feat: mDNS ESP32 - enable local network discovery over mDNS
2026-11-10 12:07:18 -04:00
fdlamotte
095bd8c311
Merge pull request #3793 from fdlamotte/eink_hibernate_when_off
...
eink: some updates (busy loop + hibernate when screen off)
2026-11-10 12:00:43 -04:00
Florent
474021f10a
eink: some updates (busy loop + hibernate when screen off)
2026-11-10 11:52:38 -04:00